• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.647-656
• /
• 2020

Recently, there has been an increasing number of cases in which important data (personal information, technology, etc.) of national and public institutions are leaked to the outside world. Surveys show that the largest cause of such leakage accidents is "insiders." Insiders of organization with the most authority can cause more damage than technology leaks caused by external attacks due to the organization. This is due to the characteristics of insiders who have relatively easy access to the organization's major assets. This study aims to present an optimized property selection model for detecting such abnormalities through supervised learning algorithms among machine learning techniques using actual data such as CrossNet data transfer system transmission log, e-mail transmission log, and personnel information, which safely transmits data between separate areas (security area and non-security area) of the business network and the Internet network.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.154-154
• /
• 2011

최근 세계 각지에서 발생하는 대규모 터널 화재사고는 많은 사상자를 동반하고 이에 따른 경제적, 사회적 손실 또한 방대하게 진행되는 실정이다. 터널 구조물의 화재 특성상 외부에 쉽게 노출되지 않기 때문에 화재 발생 시 화재에 노출된 표층이 박리되거나 비산해서 단면결손이 생기는 폭렬 현상(explosive spalling)이 발생하게 된다. 이러한 폭렬 현상은 붕괴와 같은 대형 참사로 이어질 가능성이 크다. 따라서 본 연구에서는 터널 내 화재 발생 시 콘크리트 구조물의 폭렬에 의한 붕괴를 예방하기 위하여 이액형 상온경화 실리콘 고무와 인체에 무해한 친환경 첨가제인 펄라이트를 일정한 혼합비(5wt%, 10wt%, 15wt%, 20wt%)로 혼합하여 고성능 난연 복합체를 제조하고, 열적 특성과 난연 특성을 연구를 진행하였다. 열적 특성에 관한 시험으로 TGA를 측정하였으며, 난연 특성에 관한 시험으로는 화염 시험, 내화로 시험, 탄화로 시험을 진행하였다. 우선 TGA 시험은 $20^{\circ}C/min$ 승온 속도로 $800^{\circ}C$까지 실험을 하였고, 화염 시험은 제작한 시편과 gas torch($1200^{\circ}C$)의 화염 거리를 약 10cm로 하여 약 1시간 동안 시험을 하였다. 내화로 시험은 내화로 장치를 이용하여 RABT curve(5분만에 $1200^{\circ}C$도달 후 한 시간 동안 유지 후 냉각, 총 시험 시간 180분) 조건을 만족하는 환경에서 제작한 시편을 콘크리트에 부착하여 콘크리트의 내부온도를 측정하였다. 탄화로 시험은 탄화로 장치를 이용하여 $2^{\circ}C/min$ 승온속도로 $900^{\circ}C$까지 실험을 하여 외부 형태 변화를 관찰하였다. 각각의 시험 결과 TGA 열분해 결과 순수한 실리콘 고무보다 난연제인 펄라이트를 첨가했을 때 더 높은 온도에서 초기 분해 거동을 보였으며, 최종 잔류량은 80%를 보였고, 5 wt%의 펄라이트가 혼합된 시편의 최종 잔류량이 높은 것으로 보아 열분해에 가장 강한 조성임을 알 수 있었다. 화염 시험 결과 펄라이트가 혼합된 모든 시편에서 $300^{\circ}C$가 넘지 않은 결과를 보였다. 이는 제조된 복합체가 화염에 직접적으로 장시간 노출이 되어도 안전하다는 것을 알 수 있다. 내화로 및 탄화로 시험 결과 펄라이트가 15wt%와 20wt%가 첨가된 시편들보다 5wt%와 10wt% 첨가된 시편들이 고온에서 안정하다는 것을 보였다.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.205-212
• /
• 2018

Spontaneous ignition is not only severe economic damage but also a typical plant damage caused by harmful gases generated during the fire. Because coal is porous, it causes oxygen to be absorbed in the amount of oxygen per unit weight of oxygen, resulting in low humidity and low thermal conductivity. The cause and effect of spontaneous ignition are very complex, so it is difficult to prevent it beforehand and once it is difficult to digest it, it is difficult to digest it. This study examines structural safety by conducting a structural analysis of the cooling ball system to prevent spontaneous combustion of coal stockpile plants and external pressures.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.88-93
• /
• 2016

A fire detector installed in wood cultural properties has not have selected the detector type appropriate for the features of cultural properties and the structure of wood fire after the fire in Sungnyemun-Gate since 2008. Applying wooden cultural properties different from the general architecture of the structure and fire characteristics is difficult. Therefore, buildings were classified into four shape types and field survey and wooden architecture structure characteristics to identify the problems of the detectors installed on wooden cultural property buildings. The problems appeared to lack the adaptability to external fire detection sensor selection and missing fire detectors installed in accordance with the place. To solve the problem, the closed and open space of the rooms used a smoke detector, outdoor select flame or fixed temperature linear detector to solve the problem.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.338-344
• /
• 2010

The automatic water quality monitoring system (AWQMS) have been installed to immediately response to any pollution incident. It also make it possible to conduct the task efficiently regarding water quality control. The purpose of this study is to enhance reliability by securing accuracy of automatic water quality data through quality assessment (QA) for temperature, pH, dissolved oxygen (DO), electric conductivity (EC), total organic carbon (TOC). The result of comparison between manual and automatic data, relative accuracy of general items (temperature, pH, EC, DO) and TOC were mostly satisfied with guideline (i.e. less than 20%). On the other hand, relative accuracy of DO between sampling site and housing site was somewhat against the guideline. The contamination by attaching algae and microorganism in the pipeline is considered as main cause. After backwashing the pipeline, DO concentration was increased up to 53%. Therefore, pipeline management is recognizable as important thing to secure reliability of water quality data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.452-455
• /
• 2017

As the number of high - rise buildings has increased recently, this research society has become interested in the method of cleaning the external wall required. When cleaning these areas, an accident occurs every year when a person uses dangerous manual labor using a gondola. The main goal of this work is to enable people to manipulate the robot with simple operation without dangerous manual operation when working in a vertical structure. As the altitude increases, the concept of the mechanism attaching to the vertical structure while enduring the external resistance in the increase of the wind strength is applied, and the additional attachment device is attached to the end of the leg based on the existing four- According to the control, the development result of the robot having the function of detachable to the glass is presented.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.150-151
• /
• 2008

With the proliferation of vehicles and advancement of Information Technology, the technology of Telematics, which provides valuable services to people by collecting and analyzing the information from drivers, vehicles and Telematics environments (e.g. traffic information, road condition, weather information, etc.), has been a hot research area in IT and automotive recently. As the information technology revolution brings more and more assistance for driver information processing becomes increasing important. Therefore, drivers' workload is very essential factor for safety driving in Telematics environment. For managing drivers' workload effectively, ETRI haven been developing vehicle and driver management system which can collect data from drivers and vehicle in realtime and analyze the data to manage drivers' and vehcles' status since 2007. This technology will apply to commercial vehicle telematics such as texi or truck management system in the future for increasing driving safety. In this presentation, I would like to explain what we had developed so far and discuss future direction.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1305-1311
• /
• 2016

The smart factory, a combination of ICT technology to the entire production process of a product, means can you intelligent factory is to achieve such reduction and process improvement of the production cost. To implement the smart factory, inevitably must have an internal equipment connections to the external network, this is by equipment which is operated by the existing closure network is exposed to the outside network, the security vulnerability so that gender is increased. In order to solve this problem, it is possible to apply security solutions that are used in normal environments. However, it is impossible to have just completely blocking security threats that can occur in a smart factory network. Further, considering the economic damage that can occur during security breach accident, which cannot be not a serious problem. Therefore, in this paper, a look to know the security measures that can be applied to smart factory, to introduce the main fusion security technology necessary to smart factory dedicated security gateway.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.6
• /
• pp.115-122
• /
• 2019

CCTV(Closed-Circuit Television) is increasingly exposed to CCTV per person as the number of installations increases every year for accident prevention and facility safety. The intelligent video surveillance system technology is attracting attention to the privacy protection of exposed subjects. The intelligent video surveillance system performs a process for the privacy protection so as to perform the action type of the subject and the judgment of the situation in the simple identification of the photographed image data, or to prevent the information, from which the information of the photographed subject is exposed. The proposed technique is applied to the video surveillance system and converts the original image information taken from the video surveillance system into similar image information so that the original image information is not leaked to the outside. In this paper, we propose an image conversion mechanism that inserts a virtual face image that approximates a preset similarity.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.16-25
• /
• 2023

There are various types of foreign object debris (FOD) in the aviation industry. Tools lost by workers can act as a risk factor throughout aircraft operation, manufacturing, and maintenance fields. Accidents caused by tools lost due to workers' carelessness continue to occur throughout the aviation industry. Aviation-related institutions such as FAA and EASA have established tool control regulations and systems to prevent FOD occurrence. However, in Korea, related regulations and procedures are insufficient. A systematic and effective tool control system is required for reliable manufacturing, airworthiness, operation, and maintenance of aircraft. In this paper, tool control regulations and procedures of domestic and foreign air traffic authorities and aviation industry-related organizations were studied. A wireless communication-based tool control system was proposed based on the NAS 412's tool control regulations certified by the National Standards Association.