• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.79-87
• /
• 2003

In this paper, we propose a method to obtain a linear characteristic using soft computing for systems which have array sensors of nonlinear characteristics. Also a procedure utilizing the pattern information of array sensors without additional sensors is proposed to reduce disturbance effects. For a typical example, even a single CdS cell for CdS array has nonlinear characteristics. Overall linear characteristic for CdS array is obtained using fuzzy logic for each cell and overlapped portion. In addition, further improvement for linearization is obtained applying genetic algorithms for the parameters of membership functions. Also the effect of disturbing external light changes to the CdS array can be reduced without using any additional sensors for calibration. The proposed method based on fuzzy logic shows improvements for position measurements and disturbance reduction to external light changes due to the fuzziness of the shadow boundary as well as the inherent nonlinearity of the CdS array. This improvement is shown by applying the proposed method to the ball position measurements of a magnetic levitation system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2015

To implement an automatic picking system (APS) in distribution center with high precision and high dynamics, this paper presents a high gain observer-based robust speed controller design for a linear induction motor (LIM) drive. The force disturbance as well as the mechanical parameter variations such as the mass and friction coefficient gives a direct influence on the speed control performance of APS. To guarantee a robust control performance, the system uncertainty caused by the force disturbance and mechanical parameter variations is estimated through a high gain disturbance observer and compensated by a feedforward manner. While a time-varying disturbance due to the mass variation can not be effectively compensated by using the conventional disturbance observer, the proposed scheme shows a robust performance in the presence of such uncertainty. A Simulink library has been developed for the LIM model from the state equation. Through comparative simulations based on Matlab - Simulink, it is proved that the proposed scheme has a robust control nature and is most suitable for APS.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.195-196
• /
• 2017

This paper proposes a permanent magnet synchronous motor(PMSM) control using a repetitive controller. Repetitive controllers are often used to eliminate periodic disturbances. Based on this, it is possible to alleviate the torque disturbance occurring at a constant cycle to the load of the motor. This paper proposes a method of rejecting periodically generated disturbances by using a repetitive controller and verified by simulation.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.402-407
• /
• 2003

IPMSM은 회전자 위치의 정확한 정보를 알기 위하여 엔코더와 리졸버와 같은 위치센서를 사용한다. 이러한 센서는 무게와 부피가 증가하고 가격이 높으며 온도와 외란 등에 매우 민감하다. 따라서 AC 드라이브의 센서리스 벡터제어에 많은 관심을 가지게 되었다. 센서리스는 수학적 모델, 물리적인 현상 및 제어이론을 이용하는 방법으로 분류되어 연구되고 있다. 수학적인 모델을 이용하는 방법에는 고장자 전압에서 고정자 저항에 의한 전압 강하분을 제거한 항을 적분하여 자속의 위치를 추정한다.(중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.951-956
• /
• 1991

굴삭기 엔진 펌프시스템을 실험결과에 근거해서 모델링하여 수치적으로 시뮬레이션을 행하였다. 엔진.펌프시스템은 그 구성이 복잡할 뿐만 아니라 시스템자체의 비선형성,작업에 따라 시스템에 가해지는 불확실한 외란, 파라미터의 변동으로 인하여 정확한 모델링을 행하기는 다소 어려움이 있었다. 비례제어만을 사용시는 정상상태오차의 발생,초기의 회전수저하등으로 인하여 적합하지 않았다. 이를 개선하기 위하여 PID제어를 사용하였을 경우 정상상태오차는 제거할 수 있으나 정착시간이 길어지는 것을 볼 수 있었다. 슬라이딩모우드에 의한 제어법을 적용하였을 경우 정상상태오차,정착시간,최대회전수저하량을 모두 만족하였으나 과도상태에서 오실레이션이 발생하는 현상을 볼 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.278-281
• /
• 2002

In this paper we propose a controller which has the capability of disturbance measurement calibration for Cds array sensors in a magnetic levitation system. Steady state error due to environment light condition or external disturbance is corrected constantly. The correction is made by the sensors to measure the ball position of the system without additional deployment of sensors.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.378-379
• /
• 2019

본 논문은 LCL 필터를 사용하는 3상 계통연계 인버터의 그리드 전류 오차를 개선하고 고조파 왜곡 현상을 억제하기 위해 다중 공진제어 기법을 슬라이딩 평면에 적용한 슬라이딩 제어기(SMC)를 제시한다. 일반적으로 시스템 파라미터가 변경되거나 계통에 외란이 발생할 경우 슬라이딩 평면이 표류하는 현상이 나타나며 이러한 표류 현상은 시스템 정상상태 오차와 시스템에 고조파 왜곡 현상을 일으키고 계통연계 인버터의 전류 품질에 심각한 영향을 미치게 된다. 이러한 현상을 해결하기 위해 적분 함수가 추가된 SMC가 제안되었으나 해당 제어기는 효과적으로 정상상태 오차를 제거하는 반면 슬라이딩 평면의 표류현상을 충분히 줄여주지 못하는 한계를 가지고 있다. 이러한 정상상태 오차와 표류현상을 제거하기 위해 다중 공진제어 조건을 슬라이딩 평면 함수에 추가한 제어기를 제시한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.107-114
• /
• 2014

This paper proposes a common rail pressure control algorithm for passenger car diesel engines. For handling the parameter-varying characteristics of common rail systems, the quantitative feedback theory (QFT) is applied to the design of a robust rail pressure control algorithm. The driving current of the pressure control valve and the common rail pressure are used as the input/output variables for the common rail system model. The model parameter uncertainty ranges are identified through experiments. Rail pressure controller requirements in terms of tracking performance, robust stability, and disturbance rejection are defined on a Nichols chart, and these requirements are fulfilled by designing a compensator and a prefilter in the QFT framework. The proposed common rail pressure control algorithm is validated through engine experiments. The experimental results show that the proposed rail pressure controller has a good degree of consistency under various operating conditions, and it successfully satisfies the requirements for reference tracking and disturbance rejection.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1020-1026
• /
• 2014

A problem of sliding mode control is chattering because of controle input signal included unknown disturbance and nonlinear input parameters. This paper presents a sliding mode controller design to inverted pendulum system. In this paper, a sliding mode control algorithm to reduce a chattering is proposed. The reduction of chattering is accomplished by smoothing function for nonlinear control input. In this method, the dynamic equations of the inverted pendulum is decoupled by considering nonlinear parameters and external disturbances. Therefore, this study is applied to obtain switching control inputs for sliding mode controller. The proposed technique is tested to the control of inverted pendulum through computer simulations. The result shown reduced chattering in control input.