• Korean Architects
• /
• no.1 s.214
• /
• pp.56-59
• /
• 1987

• Fiber Technology and Industry
• /
• v.9 no.1 s.33
• /
• pp.9-20
• /
• 2005

• Elastomers and Composites
• /
• v.28 no.1
• /
• pp.37-44
• /
• 1993

• Environmental engineer
• /
• s.328
• /
• pp.13-13
• /
• 2013

• Monthly Korean Chicken
• /
• v.64 no.58 s.124
• /
• pp.102-106
• /
• 2005

• Journal of Ginseng Research
• /
• v.25 no.3
• /
• pp.122-126
• /
• 2001

Fresh ginseng was washed with water and packaged individually in a soft film bag (ONY/LDPE/L-LDPE;200${\times}$300mm, 90$\mu\textrm{m}$), then stored at 25$^{\circ}C$, 10$^{\circ}C$, or 4$^{\circ}C$ to investigate quality and weight changes of the packaged fresh ginseng according to its storage time. Softening was the major phenomenon which influenced on the quality of the packaged fresh ginseng while spoilage and color-change were relatively minor phenomena. There were very good correlations not only between the quality change rate constant and the storage temperature but between the weight change rate constant and the storage temperature. This result suggests that the shelf-life and the weight loss of the packaged fresh ginseng being store at low temperature can be estimated by an accelaerated sotrage test.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.3
• /
• pp.15-22
• /
• 2016

The purpose of this study is to propose improvements for 3D garment simulation system by comparison with the difference between real garment and 3D garment simulation of women's jacket. The process of the study was to take pictures on the standard sized subject wearing the jacket of basic size, to get a avatar from body sizes of the subject, and to obtain images of 3D garment simulation on the avatar. The appearance evaluation was resulted by the method of a questionnaire survey after presenting the images to 24 members of patterner and 22 members of designer. On that appearance evaluation by designer group, perform comparative analysis of differences between the real garment and the 3D garment simulation of women's jacket. On that appearance evaluation by patterner group, perform comparative analysis of differences between the real garment and the 3D garment simulation of women's jacket. There were the differences on 4 areas: 1 questions of the side, 1 questions on the back, 7 questions on the sleeve, and 1 questions on the collar, and the results showed that the 3D garment simulation was preferable on each question.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1122-1128
• /
• 2009

In cell phone, factor of external and internal are important. Many people look appearance at first time. The main aim of this study is to know users affect on weight of cell phone. For the evaluation based on weight of cell phone, 46 participants took part in this study. They carried four cell phone which different weigh. After that they made up questionnarie. The result, the people felt positive affect in a light cell phone and negative affect in weighty cell phone. They preferred a light cell phone. But there were not statistically meaning difference in affect of luxurious. It be used when the cell phone which has special target is made.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.11-17
• /
• 2007

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a power-law transformation and histogram specification in this paper for improvement of vision inspection accuracy. As a result of these power-law transformation and histogram specification algorithm, we could increase the exactness of vision inspection and prevent system error from physical and spirit condition of human. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.177-177
• /
• 2010

티타늄 화합물은 뛰어난 물리적 특성과 인체 무해성을 가지고 있어 생체, 내식 및 내마모 재료 등에 널리 응용되고 있으며, 다양한 색상 구현을 통한 미려한 외관 등 기능성을 위한 표면처리 분야에도 많은 관심을 받고 있다. 이중 질화 티타늄은 금색을 대체할 수 있는 물질로 코팅방법과 기판온도, 바이어스, 질소유량 등과 같은 공정변수 제어를 통해 그 물성을 변화시킬 수 있어 기능적 측면과 함께 미려한 외관처리에 응용이 가능하다. 본 연구에서는 아크(cathodic arc) 코팅 시스템을 이용하여 다양한 조건에서 TiN 박막을 제조하고 그 특성을 평가하였다. 아크 장비는 화합물 박막을 코팅할 수 있는 아크 소스와 시편 홀더, 가스 주입구, 시편 가열장치 그리고 배기 장치로 구성되어 있고, 아크 소스에 장착된 타겟은 99.5%의 Ti 타겟을 사용하였다. 시편과 타겟 간의 거리는 약 31cm이며, 시편은 알코올과 아세톤으로 초음파 세척 된 강판(냉연 강판), 실리콘 웨이퍼를 사용하였다. 시편을 진공용기에 장착하고 ${\sim}10^{-6}$ Torr까지 진공배기를 실시하고, Ar 가스를 진공용기 내로 공급하여 ${\sim}10^{-4}$ Torr에서 시편에 bias (Pulse : 400V)를 인가한 후 아크를 발생시켜 약 5분간 청정을 실시하였다. 플라즈마 청정이 끝나면 시편에 인가된 bias를 차단하고, 질소 유량, 온도, bias, 시간 등의 공정변수에 따라 코팅을 실시하였다. 질소의 유량이 80sccm 일 때, Ti 금속 결정구조가 나타났는데, 이는 질소와 충분하게 반응하지 못한 Ti이 기판에 코팅되어 나타나는 현상으로 판단된다. 색상변화에서는 질소 유량이 증가함에 따라 노란색이 짙어지며, TiN은 시편에 인가되는 bias 전압이 높아질수록 붉은색이 증가하고, 온도에 따른 큰 변화는 관찰되지 않았다. 공정변수에 따른 반사율 변화는 TiN의 경우 질소 가스 유량이 200sccm, bias 150V, 공정 온도 200도에서 반사율이 가장 높았으며, 코팅 시간이 짧을수록 반사율이 높아지는 경향을 나타냈다. 따라서 본 연구에서 얻어진 결과를 외관 코팅 분야에 응용한다면 장식성과 외관의 경도, 내마모성, 내식성의 향상 등 많은 장점을 가질 것으로 예상된다.