• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.22-29
• /
• 2013

The combined structure of both an annular dielectric resonator and a quarter-wave monopole is proposed to generate an omnidirectional radiation pattern over the wideband frequency range. The monopole works at the lower frequency band and excites the cylindrical dielectric resonator along its center point by electrical coupling mechanism. The rectangular shape of the DR is cut to generate the wideband operation of 4.7-18.2 GHz. The geometrical parameter of cylindrical dielectric resonator is 5.8 mm, 11.6 mm and 6.0 mm in inner diameter, outer diameter and height, respectively.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.521-527
• /
• 1999

In this study, capillary columns for ion chromatography were developed to analyze trace amount of ions in samples. When small I.D. capillary columns are used in ion chromatography, the typical flow rate of the mobile phase is $5{\sim}15{\mu}L/min$ and the typical column length is 50~150 mm. The capillary columns were made using RSL-300 fused silica capillary(I.D.: 0.53 mm, O.D.: 0.67 mm) and AG14 column resin(support : polystyrene-divinylbenzene, functional group : alkyl quaternary ammonium). The new conductivity cell and suppressor were also developed and made for capillary column ion chromatography. When several anions (fluoride, nitrite, nitrate, chlorate) were analyzed using these capillary columns, reproducible and good chromatograms were obtained.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.664-667
• /
• 2010

Solid rocket propulsion systems are generally used for tactical missiles due to the structural and operational simplicity. Nevertheless, various kinds of design factors including outer diameter, length, weight, loading efficiency of propellant grain effects to thrust performance. Dual thrust is beneficial to range extension and terminal velocity increasement. But loading efficiency becomes low in case to obtain dual thrust performance by burning surface control. So, It is predicted to be reasonable to obtain dual thrust performance with high/low burning rate propellants. This study is on internal ballistic analysis and ground test to confirm dual thrust performance.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.42-50
• /
• 2015

To evaluate the heat removal capability of a condenser tube in the PCCS of an advanced nuclear power plant, a steam condensation experiment in the presence of noncondensable gas on a vertical tube is performed. The average heat transfer coefficient is measured on a vertical tube of 40 mm in O.D. and 1.0 m in length. The experiments covers the pressures of 2-4 bar, and the mass fraction of air ranges from 0.1 up to 0.7. From the experimental results, the effects of the total pressure and the concentration of air on the condensation heat transfer coefficient are investigated. The measured data are compared with the predictions by Uchida's and Tagami's correlations, and it is revealed that these models underestimate the condensation heat transfer coefficient of the steam-air mixture.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.114-114
• /
• 2002

포유동물에서 뇌와 부신에서 합성.분비되는 카테콜아민(Catecholamine, CA)계 신경전달물질인 dopamine(DA), norepinephrine(NE), epinephrine(E)은 체내 각종 생리현상의 조절에 필수적이며, 생식과 관련지어서는 시상하부-뇌하수체 간 GnRH-gonadotropin 호르몬 축의 활성을 조절하는 기능 외에도 번식과 관련된 여러 행동양식을 조절함이 잘 알려져 있다. 본 연구는 CA 생합성 효소들인 tyrosine hydroxylase(TH), dopamine beta-hydroxylase(DBH), phenylethanolamine-N-methyltransferase(PNMT)의 유전자 발현에 미치는 sex steroid의 영향을 조사하였다. 성숙한 암컷 횐쥐(SD strain)의 난소를 제거하고 1주 경과 후 vehicle(sesame oil; OVX+Oil 실험군) 또는 estradiol 17$\beta$(235ug/m1; OVX+E$_2$실험군)이 든 silastic capsule(길이 14mm; 내경 1.55mm; 외경 3.125mm)을 48 시간 동안 처리한 뒤 희생시켰다. 적출된 조직으로부터 RNA를 추출한 후 semi-quantitative RT-PCR을 시행하였다. (i) TH의 발현 정도는 OVX+Oil 군에서는 시상하부) substantia nigra(SNc)) 부신 순으로, OVX+E$_2$군에서는 SN글 부신) 시상하부 순으로 나타났다. TH 발현에 미치는 estradiol의 효과로 SNc과 부신에서는 유의한 증가를 보인데 비해 시상하부에서는 유의한 감소를 관찰하였다. (ii) DBH 발현 정도는 OVX+Oil군에서는 SNc> 부신> 시상 하부 순으로, OVX+E$_2$군에서는 부신＞ SNc＞ 시상하부 순이었다. DBH 발현에 미치는 estradiol의 효과로 SNc에서는 유의한 감소, 부신에서는 유의한 증가, 그리고 시상하부에서는 통계적 유의성은 없으나 감소하는 경향을 보였다. (iii) PNMT의 발현의 경우 SNc와 시상하부에서는 기보고된 바와 같이 alternative splicing에 의해 110bp 차이의 크고 작은 두 형태의 cDNA(PNMTI & PNMTs)가 증폭되었으나 부신에서는 작은 cDNA 만이 관찰되었다. PNMTs의 발현 정도는 OVX+Oil군과 OVX+E$_2$군에서 공히 부신＞ 시상하부＞ SNc 순이었고, PNMTI의 발현은 SNc가 시상하부 보다 다소 높은 경향이었으나 유의성은 없었다. PNMTs 발현에 미치는 estradiol의 효과로 SNc에서는 유의한 감소, 부신에서는 유의한 증가, 그리고 시상하부에서는 통계적 유의성은 없으나 증가하는 경향을 보였다. 본 연구에서는 CA 생합성 효소들의 유전자 발현의 조절에 미치는 estrogen 의 영향이 세포 기원이 neural crest cell인 부신 수질은 물론 뇌의 상이한 지역간에서도 조직특이적임을 관찰하였다. 이러한 결과는 각 조직에서의 estrogen 수용체 유형의 차이 혹은 작용 모드와 각 효소 유전자 발현 사이에 중요한 상관관계가 있음을 시사한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.556-560
• /
• 2001

Remote field eddy current testing (RFECT) with through-wall transmission characteristic is being applied to pipes ranging from small tubes of heat exchanger to natural gas supply pipelines. Cast iron pipes with nominal diameter of 100mm are used primarily as the waterline pipes. The leakage of water occurs due to defects in the pipes caused by vibration of automobiles and corrosion. But, the use of direct inspection methods such as insertion of inspection equipment inside the pipelines has been limited due to its lack of economical efficiency. Economical development of inspection equipments is possible since RFECT method can be easily employed for system integration and quantitative evaluation of both inside and outside defects. In this study, the development of underground pipeline inspection system was tarried out by using RFECT method in consideration of the characteristics of waterline network. This paper specifically describes the design and production of RFECT pipeline inspection pig using centralizer mechanism, development of remote field eddy current signal acquisition and processing software, and review of RFECT system operation procedures.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.30-34
• /
• 2011

This paper presents a strength safety evaluation of composite pressure container for hydrogen fuel tanks with a storage capacity of 104 liter and 70MPa pressure. The carbon fiber composite container is manufactured by an aluminum liner of Al6061-T6 and composite multi-layers of hoop winding layer in circumferential direction, $12^{\circ}C$ inclined winding layer and $70^{\circ}C$winding layer in helical direction respectively. The FEM results on the strength safety of composite fuel tanks were evaluated with a criterion of design safety of US DOT-CFFC and KS B ISO 11119-2 codes. The FEM computed results indicate that the proposed design model of 104 liter composite container is safe based on two strength safety codes. But, the computed results of carbon fiber fuel tanks based on US DOT-CFFC code is safer compared with that of KS B ISO 11119-2. Thus the hydrogen gas pressure container of 70MPa may be evaluated and designed by US DOT-CFFC code for more strength safety.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.11
• /
• pp.2305-2311
• /
• 2002

The pressure tube is a major component of the CANDU reactor, which supports nuclear fuel bundle and heavy water coolant. Pressure tubes are installed horizontally inside the reactor and only selected samples are periodically examined during in-service inspection. In this respect, a probabilistic safety assessment method is more appropriate fur the assessment of overall pressure tube safety. The failure behavior of CANDU pressure tubes, however, is governed by delayed hydride cracking which is the major difference from pipings and reactor pressure vessels. Since the delayed hydride cracking has more widely distributed governing parameters, it is impossible to apply a general PFM methodology directly. In this paper, a PFM methodology for the safety assessment of CANDU pressure tubes is introduced by applying Monte Carlo simulation in determining failure probability Initial hydrogen concentration, flaw shape and depth, axial and radial crack growth rate and fracture toughness were considered as probabilistic variables. Parametric study has been done under the base of pressure tube dimension and hydride precipitation temperature in calculating failure probability. Unstable fracture and plastic collapse are used for the failure assessment. The estimated failure probability showed about three-order difference with changing dimensions of pressure tube.

• Tunnel and Underground Space
• /
• v.10 no.4
• /
• pp.533-543
• /
• 2000

Deformation behavior and stability of vertical pipeline subjected to underground excavation have been studied by means of numerical analysis. Vortical ground displacements cause the pipe to be compressed, while horizontal ones cause it to be bent. In that region the vertical pipeline meets with the induced compressive stress and bending stress. In addition horizontal rock stress subjected to underground excavation may press the tube in its radial direction and it finally produces the tangential stress of pipe. In this study active gas well system is considered as an example of vertical pipelines. Factor analysis has been conducted which has great influence on the pipeline behavior. Three case studies are investigated which have the different pillar widths and gas well locations in pillar. For example, where overburden depth is 237.5 m and thickness of coal seam is 2.5 m, chain pillar of 45.8 m width in the 3-entry longwall system is proved to maintain safely the outer casing of gas welt which is made of API-55 steel, 10$\frac{3}{4}$ in. diameter and 0.4 in. thickness. Finally an active gas well which was broken by longwall mining is analyzed, where the induced shear stress turn out to exceed the allowable stress of steel.

• Journal of Chest Surgery
• /
• v.30 no.4
• /
• pp.357-362
• /
• 1997

In vivo testings of the monoleaflet polymer valve were performed in seven dogs to prove its blood biocompatibility. The monoleaflet polymer valve used in this study was developed for short-term usage n the ventricular assist device. The frame and leaflet of the polymer valve were made of polyurethane. The inter-aortic valved conduit were implanted in four dogs and the ventriculo-atrial valved conduit was implanted in one dog. The ventricular assist devices with polymer valve were implanted in two dogs. The longest survival was 20 days. Main causes of death were bleeding and infection. To examine the blood compatibility, each blood sample was collected and RBC, WBC, hematocrit, hemoglobin, platelet and lactic acid dehydrogenase were analyzed. These studies thus far demonstrated that, with further development, a reliable and inexpensive polymer valve will be used in the ventricular assist device as short term usage.