• Korean Journal of Poultry Science
• /
• v.17 no.1
• /
• pp.53-58
• /
• 1990

Tests to evaluate the efficacy of disinfectant "Lysococ" against the oocfsts of Eimeria tenella were tested. In the sporulation test the sporulation of unsporulated oocysts of E. tenella was nearly suppressed by contact with "Lysococ" in 4% concentration after 30 minutes. In the suspension test with sporulated oocysts, "Lysococ" 4% disinfected sporulated oocysts of 5. tenella completely after a contact tune on 10 minutes. When using the oocyst-carrier test, the 4% solution was able to disinfect sporulated oocysts after a 90 minutes contact time.ter a 90 minutes contact time.

• The Journal of the Korea Contents Association
• /
• v.21 no.8
• /
• pp.489-497
• /
• 2021

This study presents the results of an empirical analysis on whether the experience of contact with North Korea and North Korean settlers affects the perceptions of unification. Specifically, the purpose of this study was to examine whether the contact experience enhances intimacy with the North Korean settlers or raises a friendly perception of North Korea.The results of this study are as follows. First, the experience of contact with North Korea and North Korean defectors had a positive effect on intimacy with North Korean settlers, friendly perception of North Korea, and perceptions of unification. Second, intimacy toward North Korean settlers and perception of North Korea played a mediating role between contact experience and unification consciousness.

• Journal of the Korean Regional Science Association
• /
• v.35 no.1
• /
• pp.19-31
• /
• 2019

This study examines the effect of national identity and threat awareness on the multi-cultural acceptability and whether contact theory actually work. For the analysis, this study used '2013 Korea General Social Survey' data and compared two groups divided according to whether or not they live in ethnic places using structural equation modeling. The empirical analysis shows that national identity does not have a direct effect on multi-cultural acceptability, and threat awareness has a full mediating effect between national identity and multi-cultural acceptability. In addition, the negative effect of the threat awareness on multi-cultural acceptability was greater in groups living in ethnic places. The findings suggest that multi-cultural awareness education is necessary to reduce the threat awareness toward foreigners, and that community-level programs are needed to prevent and coordinate conflicts arising from contact between foreigners and Koreans.

• Korean journal of communication and information
• /
• v.76
• /
• pp.92-123
• /
• 2016

This paper aims to examine systematically how audiences' exposure to crime news influences their multicultural acceptability. In particular, the analysis has focused on how the variance in the effects of contacts with crime news on foreigners takes place, according to the types of media and communication favored among the audiences. Also, with perceived risk toward crime as a mediating variable, this research scrutinizes the way crime news on foreigners comes to influence multicultural acceptability among the audiences. While various news sources and communication channels are influential in strengthening the perceived possibility of crime on the individual level, the results show, television seems to be particularly more effective with regards to the perceived prevalence of crime on the social level (RQ 1). Also, while contacts with crime news through 'dialogic' media rarely influence multicultural acceptability significantly, 'discursive' media and face-to-face contacts have negative impacts on the multicultural acceptability (RQ 2). Consequently, perceived risk on the social level seems to play the role of full mediation in the process where audiences' contact with crime news through discursive media influences their multicultural acceptability (RQ 3). Based on these findings, both theoretical and practical implications were discussed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.207-215
• /
• 2017

Many factors should be considered for successful denture treatment at edentulous patients: support, retention, stability, occlusion, esthetics, etc. The patient who has severely absorbed residual ridges, however, treatments are challenging to satisfy those factors. The dentures that use anatomic artificial teeth show good mastication efficiency and esthetics but, can easily lose stability at absorbed ridges. On the contrary, the dentures that use non-anatomic artificial teeth perform better stability but, lower masticatory efficiency and esthetics at absorbed ridges. The lingualized occlusion, using both anatomic and non-anatomic teeth, introduced for compromise those of the pros and cons. At lingualized occlusion, buccal cusps of the teeth do not contact on centric relation. Therefore, direction of the occlusal force towards lingually, then stability of dentures increases. This case report shows the results of the treatment flat residual ridges using complete dentures with ligualized occlusion to increase dentures stability and satisfactory of the patient.

• Solar Energy
• /
• v.10 no.2
• /
• pp.18-27
• /
• 1990

The hot water producer by the combination of the solar thermal energy and freon gas compression heat has been developed. Freon R-12 gas was circulated through the system including the solar absorption panel, which has no glassing and no insulation, and the frozen and burst problems were intrinsically eliminated. The manufacturing and running costs may go further down than the regular solar hot water systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2008

The analysis and results of flexural behavior for steel composite beam with built-up cross-section considering bolt deformation are presented in this paper. The bolt deformation and the restrict effect due to bolt-connection and friction are considered to investigate the flexural behavior of steel composite beam. Nonlinear spring element in ABAQUS is used to consider bolt deformation, also the results are compared with those in case bolt deformations are ignored. The displacement, bending stresses and shear stresses are calculated by F.E. model, and these results are compared with the analytical value of no interaction beam, partial interaction beam and full interaction beam. As a result of analysis, the behavior of composite beam is more dependant on the composite rate than the friction of the steel. When the composite rate is more than 50%, the behavior of composite beam considering the effects of bolt deformation is similar to that of fully composite beam.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.144.2-144.2
• /
• 2012

접촉 식쌍성 FZ Ori를 CCD 측광 관측하여 BVRI 광도곡선을 얻고, 12개의 새로운 극심시각을 결정하였다. 먼저 우리가 구한 극심시각들을 포함한 총 218개의 극심시각 자료를 이용하여 FZ Ori의 공전주기 변화를 분석하였다. 그 결과 지난 80년 동안 FZ Ori의 공전주기가 영년 증가하면서 동시에 40~50년 주기로 변화하고 있음을 발견하였다. 우리는 주기적 변화가 제3천체에 의한 광시간 효과로 나타난다고 가정하고 몬테카를로 기법을 이용하여 $X^2_r$인 자 공간에서 최적의 광시간 해를 탐색하였다. 또 이 방법으로 구한 광시간 궤도요소를 궤도 수치적분 프로그램(MERCURY, S34BODY)에 적용하여 질점으로 이루어진 가상의 삼중성계에서 나타나는 광시간 효과를 천체역학적으로 구현하여 보았다. 한편 FZ Ori의 4색 광도곡선을 가장 최근에 개정된 2010 Wilson-Devinney 프로그램에 적용하여 측광학적 해를 구하였다. 기본 시스템 인자 외에 차가운 흑점과 뜨거운 흑점, 그리고 제3광도의 세 요인들을 조합하여 구한 14개의 해 중에서 주성과 반성의 표면에 각각 차가운 흑점과 뜨거운 흑점이 있으면서 제3광도가 검출된 해가 우리의 관측과 가장 잘 맞았다. 그러나 이렇게 구한 제3광도는 광시간 모형으로부터 예측되는 제3천체의 광도에 크게 못 미친다. 추후 분광 관측을 비롯한 다양한 방법을 동원한다면 FZ Ori에 대한 보다 완전한 모형을 얻을 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1763-1773
• /
• 1991

본 연구에서는 포화수증기와 공기의 혼합기내에서 분무수적으로의 열 및 질량 전달률을 계산하기 위하여 수적의 부분혼합모형과 비혼합모형에 대하여 수적내 과도온 도분포의 해석해를 적용성이 보장되면서도 계산상의 어려움이 수반되지 않는 형태로 구하기 위하여 수적내부의 열전도해석에 있어서 적분법을 적용하였다. 적분법으로 얻어지는 과도온도분포의 해는 유한차의 다항식으로 표시되어 비혼합모형인 경우 각시 간 구간의 경계에서의 온도분포가 연속성을 유지하면서 물성치들의 온도에 대한 종속 성이 쉽게 고려되고 계산도 용이한 형태이다. 본 보에서 제시하는 해석결과의 적용 성을 조사하기 위하여 완전혼합모형을 포함하는 세가지 수적모형들에 대한 계산결과들 로부터 얻어진 시간변화에 따른 수적의 무차원 체적평균온도변동을 유효한 실험결과들 과 비교, 검토하였으며, 부분혼합모형에 대하여 혼합기의 압력, 수적의 초기온도, 혼 합기 속에 포함되어 있는 수증기의 체적분율, 수적의 초기크기, 수적의 초기속도 및 분사각도가 주위혼합기로부터 수적으로 전달되는 열 및 질량전달에 미치는 영향을 조] 사하고 도출된 대표적인 검토 결과를 제시하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.17-22
• /
• 2018

A glove valve regulates the flow in a pipeline as a kind of control valve. However, when the disc and seat contact, the valve structure can be distorted and flow can leak due to the elongation of the valve material under high pressure. The surface texture is not good enough to seal the contact surface (in practice) because the lapping process is usually done manually. Furthermore, assembly performance is analyzed by structural analysis. Compared with a standard seat, the newly designed seat had a smaller radial deformation and a larger longitudinal deformation. Therefore, the newly designed seat can maintain a tight and uniform contact with the disc with a reduced radial deformation and an expanded available seal area with an increased longitudinal deformation. The seal performance of the glove valve has been improved in a cost-effective manner.