• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.39-46
• /
• 2005

We fabricate and analyze fully depleted optical thyristors (DOTs) using quarter wavelength reflector stacks (QWRS). QWRS are employed as bottom mirrors to enhance the emission efficiency as well as the optical sensitivity. In order to analyze their switching characteristics, S-shape nonlinear current-voltage curves are simulated and the reverse full-depletion voltages (Vneg's) of DOTs are obtained as function of semiconductor parameters by using a finite difference method (FDM). The fabricated DOTs show sufficient nonlinear s-shape I-V characteristics and switching voltage changes of these devices with and without bottom mirrors show 1.82 V and 1.52 V, respectively. Compared to a conventional DOT, this device with the bottom mirrors shows about 20％ and 46% enhancement in switching voltage change and spontaneous emission efficiency, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.153-158
• /
• 2016

In this paper, TE(transverse electric) scattering problems by a conductive strip grating between grounded double dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the conductive boundary condition is applied to analysis of the conductive strip. The numerical results for normalized reflected power are analyzed by according as the width and spacing of conductive strip, the relative permittivity and thickness of the double dielectric layers, and incident angles. The most normalized reflected powers of the sharp variations in minimum values are scattered in direction of the other angles except incident angle. The numerical results for the presented structure of this paper having a grounded double dielectric layer are shown in good agreement compared to those of the existing papers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.300-304
• /
• 2017

An implant-supported fixed dental prosthesis (ISFDP) or an implant-supported overdenture (IOD) are good options when treating a completely edentulous jaw opposing natural teeth. However, an ISFDP for a full arch requires sufficient bone quality and quantity, which limits its application. Meanwhile, using an ISFDP as an abutment of a removable partial denture has been considered recently. This clinical report discusses the treatments applied to two patients with edentulous maxillas and opposing natural teeth: one was treated with an IOD and the other was treated with an ISFDP and removable partial denture. Follow-up and management were performed for 8 years.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.26-38
• /
• 2015

Teeth wear and extrusion of antagonist are commonly observed in deep bite patient having severe vertical and horizontal overlap. These problems cause collapse of occlusal plane and abnormal anterior guidance. Without restoring harmonious occlusion, loss of multiple teeth and decreased masticatory function could not be prevented. To resolve problems associated with deep bite, multidisciplinary treatment including oral surgical, orthodontic and prosthetic treatment should be performed. This clinical report describes the results of increasing occlusal vertical dimension with a full-mouth restoration procedure. The treatment procedures include extraoral and intraoral examination, diagnosis, treatment planning, diagnostic wax-up, segmental osteotomy, orthodontic intrusion and prosthodontic rehabilitation. Full mouth rehabilitation with increasing occlusal vertical dimension can solve esthetic and functional problems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.11
• /
• pp.836-845
• /
• 2001

A Novel fully-differential bipolar current subtracter(FCS) and its application to current controlled current amplifier(CCCA) for high-accuracy current-mode signal processing were designed. To obtain full-differential current output, the FCS was symmetrically composed of two current follower with low current-input impedance. The CCCA to control output current by the bias current was consisted of the subtracter and a current gain amplifier(CGA) with single-ended current output.. The simulation result shows that the FCS has current-input impedance of 5 Ω and a good linearity. The CCCA has 3-dB cutoff frequency of 20 MHz for the range over bias current 100 $\mu$A to 20 mA. The power dissipation of the FCS and CCCA are 1.8 mW and 3 mW, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.30-34
• /
• 2006

The effect of N-fertilization on yield, milling characteristics and quality of Samcheonbyeo, an early maturing rice variety, was investigated in 2002 to 2004. The study was carried out in the southern alpine area of Un-bong Sub-Station, Honam Agricultural Research Institute. Higher nitrogen levels increased number of panicle and grain per unit area, but lowed ripening rate and decreased 1,000-grain weight. Higher nitrogen levels of up to 90 kg/ha also increased head rice yield. A nitrogen level of 90 kg/ha was found optimal for increasing ripening rate and head rice yield, and rice palatability.

• Journal of Chest Surgery
• /
• v.37 no.9
• /
• pp.796-799
• /
• 2004

A 52 day-old male infant who had Taussig-Bing anomaly with coarctation of the aorta underwent initial palliative Damus-Kaye-Stansel (DKS) procedure including arch reconstruction because of suspected intramural coronary artery, size discrepancy of great arteries, potential subaortic stenosis, refractory pneumonia, and severe congestive heart failure. Total repair was done 44 months later, which was composed of VSD patch closure, DKS take-down, and arterial switch procedure, We report a successful case of DKS take-down and arterial switch operation for the reuse of native aortic and pulmonary valves rather than Rastelli-type procedure in a patient with Taussig-Bing anomaly having palliative DKS procedure.

• Composites Research
• /
• v.15 no.3
• /
• pp.11-17
• /
• 2002

Cracking of the reinforcements is a significant damage mode in particle or short-fiber reinforced composites because the broken reinforcements lose load carrying capacity. This paper deals with elastic stress distributions and load carrying capacity of intact and cracked ellipsoidal inhomogeneities. Three dimensional finite element analysis has been carried out on intact and broken ellipsoidal inhomogeneities in all infinite body under pure shear. For the intact inhomogeneity, the stress distribution is uniform in the inhomogeneity and non-uniform in the surrounding matrix. On the other hand, for the broken inhomogeneity, the stress in the region near crack surface is considerably released and the stress distribution becomes more complex. The average stress in the inhomogeneity represents its load carrying capacity, and the difference of average stresses between the intact and broken inhomogeneities indicates the loss of load carrying capacity due to cracking damage. The broken inhomogeneity with higher aspect ratio maintains higher load carrying capacity.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.141-151
• /
• 2014

This study is to explain understanding types about the concept of a 'Region' in the 3rd grade high school students(39) through open-ended questionnaires and describe the pedagogical utilizations for this. Students' understanding types about the concept of a 'Region' are compared and then determined through two meaning agreement and association between meaning of students' understanding which is collected through open-ended questionnaires and meaning of a 'Region' which is described in high school curriculum. The results are as in the following. First, Students' understanding types about the concept of a 'Region' were divided into four categories: full, partial, ambiguous, and converted understanding. Second, The degree of right meaning agreement and association existing between two meanings is rising steadily by converted, ambiguous, partial, and full understanding. For this reason, This result can make sure the understanding degree about the concept of a 'Region' is different depending on the students. Third, Students' partial understanding, ambiguous understanding and converted understanding on region concept could be judged as misconception not fully corresponded to region concept in the curriculum explanation. Fourth, Teachers can achieve conceptual change through this misconception as a subject matter of educational dialogue for meaning change.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.97-97
• /
• 2011

관로 및 맨홀에 퇴적된 유사는 우수관거의 통수능을 감소시키고 전체 우수관거 시스템의 효과를 저하시켜, 저지대 침수 및 맨홀역류의 원인이 되고 있다. 또한 관로의 최소 유속이 유지되지 않으면 오염물이 침전되고, 관로내의 유하시간이 길어져 침전물 부패로 인한 황하물질 및 악취 등이 발생될 수 있다. 따라서 관로의 유사와 관련된 주된 연구는 관로내의 유사거동 특성을 규명하는 것이었다. 그러나 맨홀에서의 유사퇴적 및 배출 등과 관련된 연구는 매우 미흡한 실정이다. 본 연구에서 유입관과 유출관이 일직선상으로 연결된 중간맨홀을 대상으로 수리실험을 실시하고, 맨홀형태(사각형, 원형), 유사유입형태(연속주입, 일정기간주입), 유사유입량 및 맨홀내부 구조변화에 따른 맨홀내 유사퇴적량을 확인하였다. 또한 맨홀내에 퇴적된 유사를 완전히 배출할 수 있는 관거 유속을 측정하였다. 유사퇴적량을 확인한 결과 맨홀내부의 구조변화가 없는 기본형에서는 유사유입형태가 연속주입 또는 일정기간주입인지와는 관계없이 유입유사량이 증가하면 퇴적량 또한 증가하였고, 맨홀형태가 사각형 또는 원형인지와도 관계없이 맨홀내부의 유사퇴적량은 비슷하였다. 기본형과 비교하여 맨홀내부에 벤칭을 설치하였을 경우 유사퇴적량을 50 % 이상 저감시킬 수 있었다. 이러한 결과는 사각형과 원형맨홀에서 동일하였으며 유사유입형태가 연속적으로 유입되는지 또는 일정기간동안만 순간적으로 유입되는지와도 관계없이 동일하였다. 그러나 벤칭이 설치된 사각형 맨홀의 경우 맨홀내부에 퇴적된 유사를 완전히 배출시킬 수 있는 유입관거유속이 기본형과 비교하여 30 % 증가하는 것으로 나타났다. 그러나 원형맨홀에서는 벤칭을 설치함으로써 유사 완전배출을 위한 관거유속 또한 저감시킬 수 있었다. 본 연구에서 제안한 개선안의 경우 사각형, 원형, 연속주입, 일정기간주입 등의 조건과 관계없이 퇴적량을 50 % 이상 저감시킬 수 있었고, 유사 완전배출을 위한 관거유속 또한 기본형과 벤칭이 설치된 맨홀과 비교하여 50 % 이상 저감시킬 수 있음을 실험적으로 확인하였다. 원형 맨홀의 경우 완전배출 관거유속은 벤칭설치 시와 같았지만 완전배출까지의 소요시간은 본 연구의 개선안이 현저히 짧았다. 따라서 본 연구를 통해 제시안 맨홀내부 구조변화 개선안이 흐름개선과 함께 맨홀내부에 퇴적되는 유사량을 저감시킬 수 있는데 효과가 있다고 판단된다.