• Journal of Chest Surgery
• /
• v.37 no.2
• /
• pp.139-145
• /
• 2004

This study describes our surgical results of transventricular complete repair of tetralogy of Fallot in infants. Material and Method: Eight hundred and forty children underwent complete repair of TOF between January 1990 and April 2002 in our institute. One hundred sixty infants of them were included to this survey. Mean age at repair was 8.1$\pm$2.6 months (3∼12). Correction was accomplished through a short right ventriculotomy less than 30% of ventricular height in all patients. A transannular patch was necessary in 78 patients (49%). Result: There were four early deaths. There were no late deaths. Follow-up with mean duration of 66 months was completed in all survivors, All patients are currently in New York Heart Association functional class I or II. Twenty patients required late reoperations. Actuarial freedom from reoperation at 1 and 10 years were 94% and 87% respectively. Two-dimensional and Doppler echocardiographic follow-up studies showed good right ventricular function in all patients except three. Conclusion: Our results suggested that early complete repair of TOF yield the acceptable results with low mortality and morbidity. Transventricular repair of intracardiac pathology can be safely applied to these patient population, yielding good postoperative right ventricular function.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.171-176
• /
• 1998

This study was carried out to confirm whether the in vivo developmental potential of mouse hatched blastocysts (HBs) can be obtained by vitrification method using the cryoprotectant EFS35. The HBs ($\theta$ 130$\mu\textrm{m}$) were cultured in vitro until day 5 from zygotes produced in vivo and were equilibrated in 10% ethylene glycol(EG) for 5 min, and then were exposed or vitrified in EFS35 (35% EG, 18% Ficoll and 0.3M sucrose). After 30 min thawing, re-expanding HBs were transferred into one or both uterine horns of pseudopregnant recipients on day 3 (4~6 embryos /horn). Pregnancy rates of recipients and implantation were assessed by autopsy on day 15 of gestation. The results obtained in these experiments were summarized as follows : After thaw-ing, in vitro survival of HBs was not significantly different between exposed (65.5%) and vitrified(54.5%) group. Also, when the in vivo development potential was examined, total implantation was not different between control (58.5% ) and vitrified (41.0%) group, although the live fetus formation of vitrified group (24.0%) was significantly lower than that of control (58.3%) group (p< 0.05). These results suggested that vitrification freezing method of mouse HBs using EFS35 can be used to make wide the utility of embryo transfer of the more embryos produced in vitro.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.193-200
• /
• 2020

Purpose: To investigate the relationship between dementia and complete tooth loss on both sides or one side using large demographic data. Materials and methods: A retrospective cohort study was designed using the National Health Insurance Service-Elderly Cohort Database (NHIS-ECD) which was established for people over the age of 60. The experimental group was the complete edentulous cohort, which had a history of treatment for national health insurance covered complete denture on both sides or one side from July 1, 2012 to December 31, 2013. And the control group was the dentulous cohort, which had a history of conservative dental treatment for the same period. All subjects had no history of diagnosis or treatment of dementia during this time. These cohorts were matched 1:1 by age, gender, and place of residence according to the propensity score matching method. Then the incidence of dementia was compared between these cohorts. Results: Compared with those groups, the incidence of dementia was significantly higher in the experimental group (12.13%) than in the control group (9.74%) (P<.05). No clear association between other factors has been identified. Conclusion: The analysis of large-scale demographic data shows that the incidence of dementia is high in complete edentulous patients on both sides or one side.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.32-38
• /
• 2011

In this study, the correlations of concentrations in sediment heavy metals between two pretreatment methods, total digestion and aqua regia digestion, have been investigated. Total 43 samples had been collected from streams and lakes in Yeongsan and Seomjin watersheds. They were decomposed in two pretreatment methods and five metal components (Cd, Cr, Ni, Pb, Zn) were analyzed. Overall average concentrations of heavy metals were Zn>Cr>Pb>Ni>Cd in the order. The concentrations of aqua regia digestion were 35.0% (Cd), 53.8% (Cr), 66.2% (Ni), 64.4% (Pb) and 76.4% (Zn) of the concentrations of total digestion and heavy metal concentrations of total digestion were higher. Heavy metal concentrations in sediments from lakes were higher than those from streams. The correlation equations between the concentrations of total digestion and aqua regia digestion were obtained. The concentrations of Zn and Ni, which showed strong linear correlations, increased in aqua regia digestion as the concentration in total digestion increased. The linear correlation coefficients between two digestion methods for most analyzed metals were above the average correlation. However, these results can be applied with limitations due to heterogeneity of sediments.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.35-41
• /
• 2002

본 연구는 기존 벼 펠렛종자 제조장치의 제조성능 및 제조 벼 펠렛종자 품질향상을 위하여 펠렛재료 공급부, 성형부, 펠렛종자 배출부를 개선 설계 제작하여 그 성능과 제조 벼 펠렛종자 특성을 구명함으로써 직파용 벼 펠렛종자 대량생산을 위한 제조장치 개발의 기초 자료를 얻고자 수행하였으며 그 주요 결과를 요약하면 다음과 같다. 펠렛재료의 일정한 공급과 펠렛재료가 성형 홈으로부터의 이탈하는 것을 줄이고, 펠렛종자의 완전한 배출이 가능하도록 한 벼 펠렛종자 제조장치를 설계·제작하였으며, 벼 펠렛종자 제조장치를 상토 종자혼합비, 성형롤의 회전속도에 따라 실험한 결과 벼 펠렛종자 제조 능력은 성능 개선 전의 펠렛종자 제조장치에 비하언 약 1.7배 향상된 제조능력을 보였으며, 성형률은 최대 약 89 %로 나타나 개선 전의 71%에 비해 18 %정도 성형률이 향상되었다. 그러나, 벼 종자손실률은 약 24% ∼ 49%로 거의 비슷한 수준인 것으로 나타났다. 제조된 벼 펠렛종자의 특성을 분석한 결과 펠렛종자의 구형률은 99.1%로 거의 구형으로 제조됨을 알 수 있었으며, 무게는 제조 직후에는 약 1.70 g, 완전 건조 후에는 1.31 g으로 나타났고, 직경은 약 12.03 mm에서 건조 후 11.53 mm로 축소되었다. 개선 전에 비해 직경과 무게가 약간씩 증가한 것으로 나타났다. 이러한 결과는 재선된 제조장치에서 펠렛재료가 성형롤의 성형 홈에 압축 공급되고, 펠렛재료의 손실도 적었기 때문으로 판단된다. 제조된 한 개의 벼 펠렛종자 내에 포함된 완전 벼 종자의 개수는 상토 종자혼합비가 커질수록 성형롤의 회전속도가 낮을수록 많아지는 것으로 분석되었으며, 모두 펠렛종자 당 평균 약 3 개 이상의 완전 벼 종자를 포함하고 있는 것으로 나타났다. 개선 전에 비하여 펠렛종자 내에 포함된 평균 완전 종자수도 증가하였으며, 3개 이상 완전 종자를 포함한 펠렛종자의 비율도 증가하여 유압에 의한 펠렛재료 공급과 성형롤의 개선효과가 있었던 것으로 보인다. 음지 건조 후 벼 펠렛종자의 압축강도는 약 132 N ∼ 152 N으로 조사되었으며, 개선전에 비하면, 약 30 %가 증가한 것으로 나타났다. 출아율 실험 결과 상토 종자혼합비 6 : 1, 성형롤 회전속도 7 rpm에서 건답직파는 100%, 답수직파는 97 %의 출아율을 보여 만족할 만한 결과를 얻었으나, 그 외의 경우는 거의 90 % 이하의 출아율을 보여 출아율을 높이기 위한 방안이 필요한 것으로 보인다. 본 연구의 벼 펠렛종자 제조장치의 적정운전 조건은 제조된 벼 펠렛종자의 특성과 출아율을 고려해 볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1187-1195
• /
• 2009

The objective of this study is to investigate the coagulation characteristics of the completely mixed chamber for wastewater treatment. The completely mixed chamber system was composed of the reservoirs, the three-stage mixing and coagulation part with propeller impeller, the injection parts of coagulants, a sedimentation tank and a control panel. Wastewater sample of pH 8.5 and initial turbidity 1,000NTU was prepared using sludge taken from a tunneling work site. The efficiency of turbidity removal with increasing the dosage of coagulant aids increased by about 99%. Increasing coagulant above the optimal dosage, however, the efficiency of turbidity removal decreased.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.2
• /
• pp.25-33
• /
• 1990

An ultrasonic power measurement system in milliwatt range was constructed. The ultrasonic power can be determined by measuring the radiation pressure on a target using self-compensating microbalance. Measurement was performed using a perfect reflector and a perfect absorber. In order to check the feasibility of the system, the ultrasonic power for the two targets was measured. Also, the systematic measurement errors and the reproducibility were examined. The relative error between two targets is proved to be within 2%. Also when the ultrasonic power range is larger than 10mW, the standard deviation for repeated measurement becomes smaller than ${\pm}$2%.

• Korean Journal of Logic
• /
• v.19 no.3
• /
• pp.437-461
• /
• 2016

This paper investigates weakening-free fuzzy logics with three weak forms of associativity (of multiplicative conjunction &). First, the wta-uninorm (based) logic $WA_tMUL$ and its two axiomatic extensions are introduced as weakening-free weakly associative fuzzy logics. The algebraic structures corresponding to the systems are then defined, and algebraic completeness results for them are provided. Next, standard completeness is established for $WA_tMUL$ and the two axiomatic extensions with an additional axiom using construction in the style of Jenei-Montagna.

• Korean Journal of Logic
• /
• v.11 no.2
• /
• pp.171-197
• /
• 2008

In this paper we deal with new standard completeness proofs of some systems introduced by Metcalfe and Montagna in [10]. For this, this paper investigates several fuzzy-relevance logics, which can be regarded as neighbors of the R of Relevance with mingle (RM). First, the monoidal uninorm idempotence logic MUIL, which is intended to cope with the tautologies of left-continuous conjunctive idempotent uninorms and their residua, and some schematic extensions of it are introduced as neighbors of RM. The algebraic structures corresponding to them are defined, and standard completeness, completeness on the real unit interval [0, 1], results for them are provided.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.10-16
• /
• 2016

Fatigue analysis for life extension of a ship is different from that of a newly constructed ship since the current corrosion margin and voyage routes of the past and future must be considered, thereby complicating the life extension procedure. This research introduces the fatigue analysis case for the life extension project of a moss LNG carrier using full spectral fatigue analysis, which has been previously used for newly constructed ships. It is expected that the fatigue analysis methodologies and full spectral fatigue analysis program used in this study will be applicable to other life extension projects.