• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.425-433
• /
• 2001

A correlation between fatigue damage and acousto-ultrasonic (AU) parameters has been obtained from signals acquired during fatigue loading of the single-lap joints of a carbon-fiber reinforced plastic (CFRP) laminates and A16061 plate. The correlation showed an analogy to those representing the stiffness reduction $(E/E_0)$ of polymer matrix composites by the accumulation of fatigue damage. This has been attributed to the transmission characteristics of acoustic wave energy through bonded joints with delamination-type defects and their influence on the change of spectral content of AU signals. Another correlation between fatigue cycles and the spectral magnitude of acoustic emission (AE) signals has also been found during the final stage of fatigue loading. Both AU and AE can be applied almost in real-time to monitor the evolution of damage during fatigue loading.

• Korean Journal of Microbiology
• /
• v.52 no.3
• /
• pp.383-387
• /
• 2016

In fission yeast, Schizosaccharomyces pombe, the cdc31 gene encodes a member of the conserved $Ca^{2+}$-binding centrin/CDC31 family, which is a component of spindle pole body. Here, we demonstrate that the S. pombe cdc31p is also a component of TREX-2 complex, which influences mRNA export from the nucleus to the cytoplasm. Repression of the cdc31 gene expression caused growth defect with accumulation of $poly(A)^+$ RNA in the nucleus. On the other hand, over-expression of cdc31 exhibited no defects of both growth and bulk mRNA export, but showed somewhat longer cell morphology. Yeast two-hybrid analysis showed that Cdc31 interacted with Sac3 and Pci2, the subunits of TREX-2 complex. These results suggest that S. pombe Cdc31 is also involved in mRNA export as a component of TREX-2 complex.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.219-227
• /
• 1992

Formation, cellular distribution and structural changes of storage lipid, and active site and cellular localization of lipase in endosperms and cotyledons of lipid-rich seeds such as Helianthus annuus, Ricinus communis and Pinus koraiensis, and in those of starch-rich seeds such as Pisum sativum and Zea mays were investigated in relation to the seed development by cytochemical methods. In endosperms and storage cotyledons of lipid- and starch-rich seeds after seed-gathering, there were widely distributed storage material which was composed of spherical protein bodies, spherosomes, and starch granules. But cellular organelles were hardly observed in the cytoplasm. Staining pattern of vesicles released from SER, and of low electron dense membraneous granules, which were perhaps at an early stage of spherosomes, were the same as in the spherosome. Electrondense granules released from RER were observed in the vicinity of plasma membrane. As a result of lipid staining, the spherosomes were more electron dense and were uniform as compared with the protein matrix within the protein body and cytoplasmic proteinaceous granules. The major component of the spherosome was determinated to be lipid. Spherosomes and vesicles containing SER-released materials showed the same as in the electron density. Lipase activity was especially strong in the inner region and on the surface of decomposed spherosomes and near the plasma membrane.mbrane.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2017

The symbiotic star AG Peg is a nebulous binary system that consists of giant star (GS) and white dwarf (WD). We investigated the HI Balmer emission lines of the symbiotic nova AG Peg, observed in 1998, 2001, and 2002 at Lick Observatory. The $H{\alpha}$ and $H{\beta}$ line profiles consist of blue-shifted, red-shifted, and broad components of which intensities and width showed notable changes. The HI emission line profiles that represent the kinematics of the gaseous nebula appear to be mainly from an accretion disk in relatively large radius from the WD. Considering the line of an observer's sight, both GS and WD are located at the sky plane side by side during the 1998 observation, while the WD is in front of GS during 2002 but the WD in rear during 2001. Such a relative position and the spectral line intensity variation imply that a fairly constant outflow occurs into WD from GS which caused to maintain the rotating thick accretion disk structure responsible for the observed spectral lines.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.126-126
• /
• 1999

본 실험의 목적은 FED의 상부, 하부 전극으로 사용되는 Mo를 건식, 습식 식각함으로써 DED 소자의 공정을 개발하는 것이다. Mo는 $261^{\circ}C$의 높은 융점을 지니고 있으며, 우수한 열적 안정성과 비교적 낮은 비저항을 가지는 재료로써 FED와 같은 전계 방출 소자의 cathod 팁 및 전극물질로 사용되어지는 가장 보편적인 물질이다. FED와 같은 전계방출소자가 갖추어야 할 요건은 전자 방출 영역이 소자 동작시 변형되지 않아야 하고, 기계적 ,화학적, 열적 내구성이 좋아야 함인데 이러한 요건을 충족시킬 수 있고 가장 범용적으로 사용되는 물질이 Mo이다. 실험에서 사용된 Mo는 DC magnetron sputter를 사용하여 Ar 가스를 첨가하여 5mTorr하에서 Si 기판위에 증착속도를 300$\AA$/min로 하여 1.6$\mu\textrm{m}$ 증착하였다. 본 실험의 Mo 식각은 고밀도 플라즈마원인 ICP를 이용하였다. 식각특성은 식각 가스조합, inductive power, bias voltage, 공정 압력의 다양한 공정 변수에 따른 식각특성 변화를 관찰하였다. 식각시 chlorine 가스를 주요 식각 가스로 사용하고 BCl3, O2, Ar을 첨가가스로 사용하였으며, inductive power는 300-600, bias voltage는 120-200V 사용하였고 압력은 15-30mTorr, 기판온도는 7$0^{\circ}C$로 유지하였으며 식각마스크로는 electron-beam evaporator로 1$\mu\textrm{m}$ 증착한 SiO2를 patterning하여 사용하였다. 식각속도는 stylus profiler를 이용하여 측정하였으며 식각후 profile은 scanning electron microscopy (SEM)을 통하여 관찰하였다. 실험 결과 순수한 Cl2 BCl3 가스만을 사용한 경우 보다는 Cl2 가스에 O2를 첨가하였을 때 좋은 선택비를 얻었다. 또한, inductive power와 bias voltage, Mo의 식각속도의 적절한 조절을 통해 SiO2에 대한 선택도를 변화시킬 수 있었다. Cl2:O2비를 1:1로 하고 400W/-150V, 20mTorr의 압력, 7$0^{\circ}C$ 기판온도에서 식각시 200$\AA$/min의 Mo 식각속도, SiO2와의 선택비 8:1을 얻을 수 있었다. 또한 실제 FED 소자 구조형성에 적용한 결과 비등방적인 식각형상을 형성할 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.103-108
• /
• 1997

Silicon field emitter arrays (FEAs) have been fabricated by a novel method employing a two-step tip etch and a spin-on-glass (SOG) etch-back process using double layered thermal/tetraethylortho-silicate (TEOS) oxides as a gate dielectric. A partial etching was performed by coating a low viscous photo resist and $O_2$ plasma ashing on order to form the double layered gate dielectric. A small gate aperture with low gate leakage current was obtained by the novel process. The hight and the end radius of the fabricated emitter was about 1.1 $\mu\textrm{m}$ and less than 100$\AA$, respectively. The anode emission current from a 256 tips array was turned-on at a gate voltage of 40 V. Also, the gate current was less than 0.1% of the anode current.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.220-226
• /
• 2003

This paper presents the result of an investigation on the application of the acoustic emission method to the monitoring of fatigue crack initiation, growth and track location in welded joints. Fatigue test was carried out for a typical fillet welded joint of ship structure. AE parameter such as ring down count was analyzed in time domain and crack locations were examined by source location and cluster option which is one of the functions of AE signal processor The usability of AE mettled was confirmed for the detection of the initiation and location of through crack.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.43-49
• /
• 2018

Computer simulation was performed using the SIMION program to develop an electron gun for MCP cleaning. The target, MCP, is located 180mm from the source of the electron gun, and the diameter of the MCP is approximately 20mm. Therefore, we tried to find the condition that the beam diameter of electrons reaching the MCP is to be 20mm using four variables such as E, ${\phi}$, d1, d2, where the E is the energy of the electron reaching the MCP, the ${\phi}$ is the diameter of the extractor, and the d1 and the d2 are the distance from the electron source to the end of the extractor tube, and to the wall of chamber, respectively. As a result of simulation, we figuried out that the E and the d2 have little effect on the beam diameter. On the other hand, we also found that the beam diameters were very sensitive to the d1 and varied relatively large with respect to the ${\phi}$, and the d1 was the secondary order function of the ${\phi}$. Therefore we found that this function will allow us to design electron guns that are suitable for the purposes of this study.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.99-104
• /
• 2019

In a gas system fire extinguishing system, extinguishing agents are usually stored with approximately 280 bar at $21^{\circ}C$ and are released at approximately 8 MPa through the decompression valve and orifice to quickly suppress the fire. When extinguishing agents are discharged, they cause a loud noise (approximately 140 dB), which can damage electronics, such as hard disk drives (HDDs). Therefore, the noise is becoming a serious issue in the gas extinguishing system. The method of the noise reduction by adding an absorbent is most general and in this study, the thickness of the absorbent was as a selected design variable. The noise level at the observation point and the flow characteristics inside the nozzle were numerically calculated and analyzed using the commercial code ANSYS CFX ver. 18.1.

• Journal of the Korean earth science society
• /
• v.43 no.3
• /
• pp.351-366
• /
• 2022

We investigated the kinematic activity of the Type II Seyfert galaxy Mrk 1 based on H𝛽 and [O III] 5007 extracted from the MR 1 grism spectra observed with the OASIS attached to the CFHT 3.6 m telescope. The [O III] forbidden Gaussian line profiles exhibited asymmetric features with an excess of the blue component: (1) strongest at a distance of about 960 pc from the galaxy center, and (2) a wider line width of about ~900 km s^-1 in the NS direction of the center. The velocity distributions in the spectral images showed blue or approaching flow motion in the NE zone, while receding in the SW zone, implying the counter-clockwise rotation. The radial velocity data showed that the center of the AGN region appears to be blocked by gas-dust approaching toward the Earth.