• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.27-32
• /
• 2019

In this study, the vorticity distribution and the temperature distribution change around a circular cylinder were compared and analyzed with time for constant inlet velocity and periodic inlet velocity. Also, the frequency characteristics of the flow were analyzed by analyzing the time variation of lift and drag and their PSD(power spectral density). In the case of constant inlet velocity, the well known Karman vorticity distribution was shown, and vortices were alternately generated at the upper and lower sides of the circular cylinder. In case of periodic inlet velocity, it was observed that vortex occurred simultaneously in the upper and lower sides of the circular cylinder. In both cases, it was confirmed that the time dependent temperature distribution changes almost the same behavior as the vorticity distribution. For the constant inlet velocity, the vortex flow frequency is 31.15 Hz, and for the periodic inlet velocity, the vortex flow frequency is equal to the preriodic inlet velocity at 15.57 Hz. The mean surface Nusselt number was 99.6 for the constant inlet velocity and 110.7 for the periodic inlet velocity, which showed 11.1% increase in surface heat transfer.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.514-519
• /
• 1998

범용 전산유체해석(computational fluid dynamics) 코드인 CFX를 이용하여 지지격자 형상에 따른 봉다발 부수로에서의 난류유동 수치해석을 수행하였다 ABB와 SIMENS가 각각 개발한 split vane이 부착된 지지격자와 원자력연구소가 개발중인 회전유동 발생장치가 부착된 지지격자를 포함하는 부수로 난류유동을 분석하였다. 각각의 지지격자 형상에 대해 부수로에서의 축방향 속도, 횡방향 속도, 난류 운동에너지, 와류크기와 압력강하 둥을 비교-분석하였다. 세가지 경우 모두 유사한 경향을 나타냈으나 SIMENS split vane의 유동 전향날개가 크기때문에 와류와 압력강하가 다소 크게 예측되었다. 난류 운동에너지와 와류크기는 지지격자 근처에서 현저히 증가한 후 급격히 감소하는 측정결과를 CFX예측결과에서도 확인할 수 있었다. CFX 예측결과는 지지격자 근처에서 실험 결과와 다소 큰 차이를 보였으나 비교적 부수로 유동특성을 잘 나타낸다.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.337-341
• /
• 2010

The flow patterns in a stirred tank, 1m in diameter and 1 m in height, were studied using CFX, a commercial computational fluid dynamics program, with the impeller rotation speed, the impeller blade angle and the tank-bottom shape varied and the baffles included or excluded. A vortex was observed in the center of the tank in the absence of the baffles, and the intensity of the vortex increased with increasing the rotation speed. The vortex was considerably reduced in the presence of the baffles. An increase in the blade angle increased the vertical flow and decreased the vortex intensity. The flow in the corners of the tank bottom turned smoother as the tank bottom was varied in shape from flat to round.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.359-367
• /
• 2018

The vortex ring state that occurs during the descending flight of a rotorcraft generates a circulating flow like a donut near the rotating surface, and it often causes a rotorcraft fall due to loss of thrust. In this paper, we have physically identified the flow field in the vortex ring state of the quadcopter, one of the types of unmanned aerial vehicles. The descending flight of the quadcopter was simulated in a 1m subsonic wind tunnel of the Korea Aerospace Research Institute(KARI) and the Particle Image Velocimetry(PIV) was used for the flow field measurement. The induced velocity in the hovering state is estimated by using the momentum theory and the test was carried out in the range of descent rate at which the vortex ring condition could be caused. The development and the direction of the vortex ring were confirmed by the measurement of the flow field according to not only the descent rate but also propeller separation distance. In addition, the results of the study show the vortex ring state can be predicted sufficiently by measuring the flow velocity around the quadcopter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.109-117
• /
• 2002

An off-surface flow visualization experiments have been performed to investigate the flow field over a delta wing with the leading edge extension(LEX). The model is a flat wing with $65^{\circ}$ sweepback angle. The free stream velocity is 6.2 m/s, which corresponds to Reynolds number of $4.4\times10^5$ based on the wing root chord. The angle of attack and sideslip angle range from $16^{\circ}\sim28^{\circ}$ and $0^{\circ}\sim-15^{\circ}$, respectively. The visualization technique of using the micro water-droplet and the laser beam sheet enabled to observe the vortical flow structures, which can not be obtained by 5-hole probe measurements. With sideslip angle, the interaction and breakdown of the LEX and wing vortices was promoted in the windward side, whereas, it was suppressed in the leeward side.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.816-822
• /
• 2011

In this study, a program has been coded to evaluate propeller thrust rapidly following the effects of propeller shapes and the environmental facts. At this time, Semi-infinite Helical Vortices model is used to predict the induction factor which is introduced by Kawada. This program is based on Wrench's Propeller lifting line theory, and it can predict aerodynamic coefficients such as thrust, power, and efficiency. First of all, this program is compared with test results of NACA reports to verify of the reliability. Secondly, subsonic wind tunnel test has been performed following variations of propeller's rpm and inflow velocities.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.4
• /
• pp.1-5
• /
• 2008

In this paper, we propose an efficient technique for improving the grid based fluid simulation by sub-grid visuals. The detailed turbulency generated efficiently by Vortex Particle Method are blended with the flow fields coming from the traditional incompressible Navier-Stokes solver. The algorithm enables large- and small- scale detail to be edited separately.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.70-77
• /
• 1999

The disturbance of oil-water interface confined between tandem fences caused by a sequence of traveling vortices below the interface is investigated. The traveling vortices are assumed to be those detached from the tip of the fore fence. The potential flow is assumed and the density interface is replaced as a sheet of vortex. The shape of the interface is predicted by tracing a finite number of marker particles placed at the interface. The velocity of the marker particles is determined by the Biot-Savart integral along the vortex sheet plus the contribution from the traveling point vortices. The rate of change of vortex-sheet strength is predicted by using an evolution equation for vorticity. The calculated results obtained for various conditions demonstrate that the large amplitude of interfacial wave following the moving vortek can be generated by the vortices.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.52-55
• /
• 1997

여과가 진행됨에 따라 막의 표면에서 발생하여 여과선속을 저하시키는 케이크층의 형성은 막을 이용한 고-액 분리공정에서 발생하는 가장 큰 문제점의 하나로서 이는 막 분리공정의 경제성을 좌우하는 중요한 인자가 된다. 이러한 문제점을 극복하기 위하여 유체와 막 사이의 상대속도를 증가시켜 여과속도를 향상시키는 십자흐름 여과, 즉 CFF(crossflow filtration)에 대한 연구가 활발히 진행되어 왔다. 그러나 이러한 심자흐름 여과에서도 막과 유체 사이의 상대속도의 증가에 한계가 있고 또한, 막의 기공보다 작은 입자가 막의 기공 내에 침투하여 막을 오염시키는 현상을 예측하기 어렵기 때문에 여과기의 설계에 있어서 많은 문제점이 발생하고 있다. 이에 오염된 막을 재생시키기 위하여 기계적.화학적인 여러 가지 방법들이 개발되고 여과선속을 향상시키는 방법이 꾸준히 연구되어 분리막 기술의 경제성을 향상시켜 왔다. 본 연구에서는 매우 안정된 유동의 하나로서 막 표면의 전단력을 향상시키는 데에 효과가 있다고 알려진 Taylor와류를 응용한 회전막 여과기를 사용하여 여러 가지 크기의 입자에 대한 여과실험을 수행함으로써 이러한 유동이 케이크의 형성에 미치는 영향을 살펴보았다. 또한 여과선속에 영향을 미치는 여러 매개인자를 알아보고 실험결과를 간단한 모델식에 적용해 봄으로써 막의 저항을 예측할 수 있는 모델식으로의 개선 방향을 제시하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1017-1026
• /
• 2016

The present paper describes the two off-surface visualization techniques and their application examples to vortex flows. One of the two visualization techniques is the classical smoke-wire technique, and the other is the visualization technique using the micro water-droplets generated by the home-style ultrasonic humidifier. The smoke-wire technique has the limit of air flow speed (about 5 m/sec for 0.07 mm-diameter wire) and the pollution problem, but it produces very fine and clear streak line sheet. It is applied to visualize the wing-tip vortices of a 3-dimensional wing. The micro water-droplet technique has the larger limit of air flow speed (above 10 m/sec) and is free from pollution and toxic problems compared to the smoke-wire technique. It is successfully applied to visualize the complex vortex system of a double-delta wing with an apex strake.