• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.2
• /
• pp.168-175
• /
• 2021

This study compared the microleakages and compressive strengths of various base materials. To evaluate microleakages, 50 extracted permanent premolars were prepared. The teeth divided into 5 groups of 10 each according to the base materials. Cavities with a 5.0 mm width, 3.0 mm length, and 3.0 mm depth were formed on the buccal surfaces of the teeth. After filling the cavities with different base materials, a composite resin was used for final restoration. Each specimen was immersed in 2% methylene blue solution and then observed under a stereoscopic microscope (× 30). To evaluate the compressive strength, 5 cylindrical specimens were prepared for each base material. A universal testing machine was used to measure the compressive strength. The microleakage was highest in the Riva light cure^TM group and lowest in the Biodentine^TM and Well-Root^TM PT groups. For the compressive strengths, in all groups, acceptable strength values for base materials were found. The highest compressive strength was observed in the Fuji II LC^TM group and the lowest strength in the Well-Root^TM PT group.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.327-334
• /
• 2007

The purpose of this study was to evaluate the effect of burs on microleakage of Class V resin restorations when a self-etching primer adhesive was used. Forty Class V cavities were prepared with four different cutting burs on extracted third molars, and divided into one of four equal groups (n = 10); Group 1-plain cut carbide bur (no. 245), Group 2-cross cut carbide bur (no. 557), Group 3-fine diamond bur (TF-21F), Group 4-standard diamond bur (EX-41). The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. Cavities were treated with Clearfil SE Bond and restored with Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. The results of this study were as follows; 1. At enamel margin, microleakage of group 4 was statistically higher than those of group 1, 2 and 3 (p < 0.01). 2. At dentinal margin, microleakage of group 4 was statistically higher than group 3 (p < 0.01), but group 1 and 2 were not statistically different with group 3 and 4. 3. Enamel microleakage was statistically higher than dentinal microleakage in group 1, 2 and 3 (p < 0.05), but statistical difference between the microleakage of enamel and dentinal margin was not in Group 4. In conclusion, the use of coarse diamond bur showed high microleakage at both enamel and dentinal margin when Clearfil SE Bond was used in class V cavity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.595-603
• /
• 2005

Incomplete removal of bacteria contaminated dentin or enamel associated with caries is a potential problem in restorative dentistry Secondary or residual caries, pulpal inflammation and hypersensitivity may result from bacteria left after the initial preparation, especially if an adequate seal against microleakage is not obtained. A possible solution to eliminate residual bacteria left in a cavity preparation would be to treat the cavity with cavity disinfectant wash. But a potential problem with using a cavity disinfectant with dentin bonding agents could be their interference with the ability of the resin to bond to the tooth micromechanically. The purpose of this study was to evaluate the effect of 2% chlorhexidine containing cavity disinfectant ($Consepsis^{(R)}$) on shear bond strength and microleakage of dentin bonding agents, $Adper ^{TM}$ $Scotchbond^{TM}$ Multi-Purpose, $Adper^{TM}$ Single Bond and $Adper^{TM}\;Prompt^{TM}\; L-Pop^{TM}$ Sixty and sixty sound human third molar teeth, respectively, were used for shear bond strength and microleakage test. For experimental group, cavity disinfectant was applied before dentin bonding agents, and was not applied for the control group. The result from the this study can be summarized as follows ; 1. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the shear bond strength of dentin bonding agents. 2. Use of 2% chlorhexidine containing cavity disinfectant($Consepsis^{(R)}$) does not significantly affect the microleakage of dentin bonding agents.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.479-487
• /
• 2002

복합레진의 중합시 발생하는 수축과 응력은 와동의 형태에 의하여 영향을 받으며 이는 수복재는 물론 접착계면의 물성을 결정하는 요인이 된다. 본 연구는 다양한 C-factor를 갖는 와동에 상아질 접착제 Clearfil SE Bond(Kuraray)를 도포하고 혼합형 복합레진인 Clearfil AP-X(Kuraray)와 미세혼합형의 Esthet-X(Dentsply)를 충전하여 미세인장강도 및 변연누출을 측정 평가함으로써 중합수축이 수복물과 치아계면에 미치는 영향을 평가하고자 시행하였다. 98개의 Bovine 하악전치를 이용하여 표면의 상아질을 #600 SiC paper로 연마한 대조군 및 와동의 넓이를 조절하여 C-factor 2.3, 3.0, 3.7이 되도록 제작한 실험군 와동에 복합레진을 충전한 후 37의 증류수에 24시간 보관하였다. 저속 diamond saw(Buehler)를 이용하여 1mm 두께로 수직절단 후 고속 diamond point(#104 Shofu)를 이용하여 단면적 1mm$^2$가 되도록 hour-glass모양으로 형성하여 시편을 제작하였고, Universal testing machine(EZ-Test; Shimadzu, Japan)에 시편을 부착하고 cross head speed 1mm/min으로 인장력을 가하여 미세인장 결합강도를 측정하였다. 각 C-factor에 따른 변연누출실험을 위하여 복합레진이 수복된 치아를 37$^{\circ}C$의 증류수에 24시간 보관한 후 와동을 제외한 부위에 nail varnish를 도포하고 3mol/L silver nitrate용액에 24시간 암보관한 다음 수세하여 현상액에 24시간 경과시킨 후 치아의 장축에 따라 절단하여 침투된 색소의 정도를 광학현미경상에서 40배로 관찰하였다. 각각의 실험결과는 ANOVA/Tukey's test 및 Kruskal-Wallis non-parametric independent analysis와 Mann-Whitney U test에 의하여 통계 분석하여 다음과 같은 결론을 얻었다. 1. 대조군에 있어서 혼합형 복합레진의 미세인장 결합강도는 미세혼합형에 비하여 높았으며, 실험군 사이에는 유의차를 보이지 않았다. 2.모든 복합레진의 미세인장 결합강도는 와동의 C-factor증가에 따라 감소하는 경향을 나타내었고, 혼합형 복합레진의 실험군은 대조군에 비하여 낮게 나타났으며, 미세혼합형 복합레진에서는 유의차를 보이지 않았다. 3. 절단측 및 치은측 변연부의 미세누출정도는 혼합형 복합레진이 미세혼합형에 비하여 대체로 높게 나타났다. 4. 모든 실험군에서 미세누출은 C-factor증가에 따라 증가하였고 절단측에 비하여 치은측 변연이 높게 나타났으나 통계학적 유의차는 보이지 않았다. C-factor의 변화에 대하여 필러함량과 탄성계수가 높은 혼합형 복합레진이 미세혼합형에 비하여 더 민감한 결과를 보인다. 이는 복합레진 수복시 재료의 선택과 중합수축의 적절한 조절이 중요한 요소임을 시사한다.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.477-483
• /
• 2009

The purpose of this study was to compare the microleakage of low and high viscosity flowable resins in class V cavities applied with 1-step adhesives. Forty Class V cavities were prepared on the cervices of buccal and lingual surfaces of extracted molar teeth and divided into four groups (n=8). Cavities were restored with AQ Bond Plus /Metafil Flo $\alpha$, G-Bond/ UniFil LoFlo Plus (Low flow groups), AQ Bond Plus/Metafil Flo and G-Bond/UniFil Flow (High flow group), respectively. Specimens were immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed microleakages at the enamel and dentinal margins. In conclusion, the low viscosity flowable resins showed lower marginal microleakage than do the high vis cosity flowable resins in class V cavities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.641-644
• /
• 2003

Sea level variability and eddy in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean were studied during 1 year(October 15, 1992~October 15, 1993) using multi-satellite data(Topex/Poseidon, ERSl) produced by signal treatement. We found that generally sea level variabilities(>10cm) exist along the Antarctic Circumpolar Current in the area of 35$^{\circ}$~46$^{\circ}$S and especially strong sea level variabilities(20~30cm) were occurred by the effects of eddy due to botton topography in two small area: 49$^{\circ}$-57$^{\circ}$E and 38$^{\circ}$~42$^{\circ}$S, and 58$^{\circ}$ -64$^{\circ}$E and 42$^{\circ}$-44$^{\circ}$S.

• Korean Journal of Remote Sensing
• /
• v.19 no.4
• /
• pp.271-276
• /
• 2003

Sea level variability and eddy in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean were studied during 1 year (October 15, 1992~October 15, 1993) using multi-satellite data (Topex/Poseidon, ERS1) produced by signal treatment. We found that sea level variabilities (>10cm) generally exist along the Antarctic Circumpolar Current in the area of 35$^{\circ}$~46$^{\circ}$S and strong sea level variabilities (20~30cm) were especially occurred from the effects of eddy due to bottom topography in two small area: 49$^{\circ}$~57$^{\circ}$E and 38$^{\circ}$~42$^{\circ}$S, and 58$^{\circ}$~64$^{\circ}$E and 42$^{\circ}$~44$^{\circ}$S.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.21 no.1
• /
• pp.4-22
• /
• 2012

치경부에 발생된 병소 부위(cervical lesion)는 "우식성 병소(caries lesion)"와 "비우식성 병소(non-caries lesion)"로 분류할 수 있다. 우식성 병소는 구강 내 세균들의 활동에 기인하여 발생된 병소로서 경조직 손상 부위의 수복과 함께 우식이 재발하지 않도록 체계적으로 대응하는 것이 필요하다. 비우식성 병소는 산성 물질, 저작력 및 이물질에 의한 마모 작용과 같은 다양한 원인에 의해 발생될 수 있으며, 수복 치료에 앞서 병소에 발생 원인을 규명하는 것이 중요하다. 먼저 병소 유발 원인에 대한 분석과 이에 대한 적절한 조치를 취한 후에 수복 치료를 시행하는 것이 바람직하다. 심미적인 요구가 높은 치경부 병소의 수복을 위하여 사용될 수 있는 재료는 "불소를 방출하는 재료"와 "불소를 방출하지 않는 재료"로 나뉘어지는데, 세균의 활동에 의해 형성된 우식성 병소의 수복에는 불소를 방출하는 재료를 사용하는 것이 추천된다. 우수한 심미성과 보다 강력한 유지력이 요구되는 경우에는 복합 레진계 수복 재료들을 사용하여 수복하게 되는데, 이 경우에는 "접착 술식(bonding procedure)"이 중요한 역할을 수행하게 된다. "접착 술식"은 수복물의 일차적인 유지 뿐 아니라 지각과민을 해소하고 2차 우식을 방지하며, 궁극적으로 수복물의 수명을 좌우하는 결정적인 역할을 수행한다. 자연 치아를 최대한 보존하고자 하는 "최소침습(minimum intervention)" 개념에 바탕을 두고 세심하게 형성된 와동에 각각의 증례에 최적화된 수복 재료를 선택하여 수복치료를 시행한다면 보다 심미적이고 환자가 편안한 치경부 수복물을 완성할 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.2
• /
• pp.169-174
• /
• 2011

Acoustic emission (AE) signals were detected and analyzed in real time during the polymerization shrinkage of composite resin restoration in an artificial dental ring with a class I cavity. Most AE hit events were observed in the initial curing period of the 1st region with high contraction rate. The range of the $2^{nd}$ region for the stainless steel specimen was shorter than that for the PMMA specimen but longer than that for the human dentin specimen. AE hit events showed a blast-type signal having an amplitude in the range of 25.45 dB and a frequency band of 100.200 kHz or 240.300 kHz. These values of amplitude and frequency indicated the fracture of resin or of the adhesive layer.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.66-74
• /
• 2018

Composite resin restoration on class II cavities is a challenging procedure since it is tough to replicate proper contact, the natural shape of the tooth, etc. Moreover, it is not familiar with the procedure and tools for this specific situation, neither. Nowadays the patients, however, request more and more composite restorations which are relatively quick and more esthetic. In this case report, the class II composite resin restoration procedure is illustrated step by step. Every step must be considered its final consequence thoroughly. In this approach, we can minimize the finishing procedure and save our effort and time.