• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.80-88
• /
• 2020

With the issuance of one-week fine dust emergency reduction measures in March 2019, the public's anxiety about fine dust is increasingly growing. In order to assess the application of air purifying plant-based bio-filters to public facilities, this study presented a method for measuring pollutant reduction effects by creating an indoor environment for continuous discharge of particle pollutants and conducted basic studies to verify whether indoor air quality has improved through the system. In this study conducted in a lecture room in spring, the background concentration was created by using mosquito repellent incense as a pollutant one hour before monitoring. Then, according to the schedule, the fine dust reduction capacity was monitored by irrigating for two hours and venting air for one hour. PM₁₀, PM_2.5, and temperature & humidity sensors were installed two meters front of the bio-filters, and velocity probes were installed at the center of the three air vents to conduct time-series monitoring. The average face velocity of three air vents set up in the bio-filter was 0.38±0.16 m/s. Total air-conditioning air volume was calculated at 776.89±320.16㎥/h by applying an air vent area of 0.29m×0.65m after deducing damper area. With the system in operation, average temperature and average relative humidity were maintained at 21.5-22.3℃, and 63.79-73.6%, respectively, which indicates that it satisfies temperature and humidity range of various conditions of preceding studies. When the effects of raising relatively humidity rapidly by operating system's air-conditioning function are used efficiently, it would be possible to reduce indoor fine dust and maintain appropriate relative humidity seasonally. Concentration of fine dust increased the same in all cycles before operating the bio-filter system. After operating the system, in cycle 1 blast section (C-1, β=-3.83, β=-2.45), particulate matters (PM₁₀) were lowered by up to 28.8% or 560.3㎍/㎥ and fine particulate matters (PM_2.5) were reduced by up to 28.0% or 350.0㎍/㎥. Then, the concentration of find dust (PM₁₀, PM_2.5) was reduced by up to 32.6% or 647.0㎍/㎥ and 32.4% or 401.3㎍/㎥ respectively through reduction in cycle 2 blast section (C-2, β=-5.50, β=-3.30) and up to 30.8% or 732.7㎍/㎥ and 31.0% or 459.3㎍/㎥ respectively through reduction in cycle 3 blast section (C-3, β=5.48, β=-3.51). By referring to standards and regulations related to the installation of vegetation bio-filters in public facilities, this study provided plans on how to set up objective performance evaluation environment. By doing so, it was possible to create monitoring infrastructure more objective than a regular lecture room environment and secure relatively reliable data.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.125-136
• /
• 1995

To use the earth heat for the pig housing, an underground heat exchanger has constructed in depth of 2.5m and 20m length. The temperature of the outlet air was max. 8 kelvin higher than that of inlet air in winter season. In spite of the -7$^{\circ}C$ outside temperature, it could keep the air temperature from the earth tube above zero degree. The heating performance was maximum in value of 3.25Wh/㎥ and average of 1.75Wh/㎥ by the airflow volume of 340㎥/h. The slope of relative humidity from outlet air has shown gentler than that of inlet air. By using the underground heat exchanger, it would be possible to prepare an relatively uniform relative humidity in the swine stalls. The temperatures on the earth, where PVC pipes are buried, have shown 10~12$^{\circ}C$ on March. This can reduce the difference between day and night temperature during this season by using the underground heat exchanger.

• Conservation Science in Museum
• /
• v.3
• /
• pp.71-78
• /
• 2001

The airtightness of museum cases in museums was measured by using CO₂ tracing gas, but it has been pointed that it has a problem with measuring the airtightness of a museum case which has a hole inside before it is used or while is being used. So studies tried to come up with alternatives which make it possible to measure the airtightness of a museum case before it is used or while it is being used if necessary by indirectly measuring the airtightness of the museum case without changing its form. Indirect measuring is done by measuring the change of Art-sorb weight and the change of temperature and humidity inside the museum case. Experiments were made for 12 days with three builtin wall case installed at the same place without turning on the lights but with Art-sorb and the data logger of temperature and humidity put into museum case. The change rate was produced with the change of temperature and humidity inside the museum case divided by that of those around museum case. As a result, the temperature change rate of museum case A(0.67) was lower than that of museum case B(0.69) or museum case C(0.79). The humidity change rate of museum case A(0.12) was lower than that of museum case B(0.19) or museum case C(0.72) showing that its airtightness was the best. Also in the direct airtightness measurement by CO₂ tracing gas, the air exchange rate was compared with the humidity change rate by Art-sorb in the indirect measurement.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.105-110
• /
• 1999

여러 종류의 작업장은 생산공정상의 필요나 일기변화에 따가 온습조건에 많은 차이가 있으며, 인체에 불리한 열환경조건이 조성되는 경우가 있다. 일반적으로 열피로(heat stress)와 열장애(heat strain)는 근로자의 안전과 보건을 평가하는데 필요하며, 열피로는 열적영향을 발생시키는 원인을 말하고, 열장애는 열에 의해 발생되는 결과로서 생리적인 부하를 의미하게 된다. 신체내부에서 발생되는 열은 열피로의 한가지 형태이고, 따라서 이것을 측정하는 것은 아주 본질적인 사항이다. (중략)

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.127-127
• /
• 2007

• KOREAN POULTRY JOURNAL
• /
• v.48 no.7
• /
• pp.122-125
• /
• 2016

최근 통계청에서 발표한 2015년 축산물생산비조사 결과를 살펴보면 산란계 마리 당 순수익은 계란 산지가격 하락으로 전년보다 감소하였다. 또한, 지난 5개월 동안 계란 가격은 생산비 이하를 밑도는 등 산란계산업의 큰 위기이다. 앞으로도 계란 소비 증가 요인이 없어 가격하락은 불 보듯 뻔하고 불황은 장기화될 것으로 보인다. 이런 가운데 계획적인 입추와 온습도관리로 생산성을 향상시키고 있는 자연농장(사장 장재권)은 최근 신축농장을 짓고 불황타계와 축산업 이미지 개선을 위해 다방면으로 노력하고 있다. 이번호에는 자연농장 장재권 사장을 만나 농장 운영상황에 대해 들어보았다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.134-134
• /
• 2017

전북지역의 130여개 스마트온실 중에서 주요한 10여개의 주요 온실에 대한 온습도, 이산화탄소, 광센서 및 기타 센서의 사용실태에 대한 조사를 수해하였다(2016년 9월~12월). 온실의 선정은 온실의 종류(비닐/유리)와 복합제어기 종류(국산/외산)를 중심으로 조사하였다. 국내외 업체의 장단점, 스마트기기의 활용과 문제점, 클라우드 기반의 3세대 한국형 스마트온실의 적용기반에 대한 조사를 수행하였다. 융복합 제어기와 센서는 자체의 신뢰성 이외에 운용상의 알고리즘 차이에서 오는 문제로 인해 농가에서 측정결과에 대한 신뢰성이 낮고, 측정이 부정확하고 일일측정 데이터에 대한 활용이 어렵고, 설정 값을 사용자가 직접 계산하고 값들을 입력해주어야 한다는 단점에 대한 의견이 대부분이다. 외국 제품은 데이터 측정값의 활용이 용이하고 복합 환경 상황에 알맞게 자동 계산 시스템이 체계적으로 작동하여 제어에 반영되며 국내 업체 설정 값의 범위보다 세밀하게 설정이 가능하다는 장점이 있으나 설치비용이 국내대비 3~4배 높고 고장 시 A/S가 느린 편이며 영어로 구성된 복잡한 시스템이기 때문에 100% 활용하기 어렵다는 단점이 있다. 스마트기기 활용은 복합 환경제어를 하는 농가이면 국내 업체와 외국 업체 모두 활용하고 있으며 주로 스마트 폰으로 사용되고 전용 어플이 아닌 PC원격 제어 소프트웨어인 팀뷰어(Teamviewer)를 이용하여 복합제어기 PC를 직접 조작하여 사용한다. 클라우드 활용으로는 복합환경제어기 회사에서 작물별 제어 방법과 데이터 정보를 제공하지 않는 점에 대한 농가의 불편함이 많은 편으로 작물별 농사방법이 많고 지역별 농사방법이 다르기 때문에 조사한 전북지역의 농가 10곳 모두 클라우드를 사용하지 않는 것으로 조사되었다. 다양한 온실 및 생육환경에 따른 표준화된 운영의 문제점을 개선하여 스마트팜에서 중요한 역할을 수행하는 복합센서의 표준시험방법과 절차를 개발하여 관련산업의 발전에 응용할 필요성이 있으며 단순한 하드웨어의 표준화 또는 개선방향보다는 농가의경험과 누적된 토양,작물 등의 재배 생육정보를 이용한 작물생육모델과 온실모델의 일치를 통해 센서-생육환경예측-검증방법의 포준화가 필요한 것으로 사료된다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.2
• /
• pp.339-348
• /
• 2009

This study is to examine effects of motorized flexion-distraction treatment on the pain, lumbosacral angle, lumbar lordosis angle, and lumbar 5 (L5) intervertebral disc angle in patients with chronic low back pain. We selected 30 cases of chronic low back pain, which were evenly divided into two groups: experimental group and control group. We applied the same hot pack, interferential current therapy, and ultrasound therapy to both groups. The experimental group had additional treatment of motrized flexion-distraction therapy and control group had additional of stretching exercise. For each subject, the pain, lumbosacral angle, lumbar lordosis angle, and lumbar 5 (L5) intervertebral disc angle were measured before and after treatment, While experimental groups showed significant improvements after treatment, more significant effects were found in the experimental group.

• Conservation Science in Museum
• /
• v.5
• /
• pp.31-36
• /
• 2004

The purpose of this experiment was to check the effects on metal corrosion of the 6 types of tree (Ash tree, Japanese cedar, black walnut, western hemlock, paulownia coreana and maple) which are currently being used, or the use of which is under study, by the Museum. As a method of test, an Oddy Test was conducted where the materials to be tested and the metal test piece are exposed to a specified temperature and humidity for a long period of time and the effects of materials on the test piece are observed. The results of the Oddy Test conducted on all 6 types of tree showed slight difference in the form of metal corrosion, and except for the blank, corrosion occurred on the entire surface of most iron (Fe) and lead (Pb) test pieces. Minor level of discoloration was noted in all test pieces of copper (Cu) even though different levels.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.490-493
• /
• 2014

To protect the students from food poisoning, in this paper, it is proposed that the Smart HACCP system which based with WCDMA-LTE to monitoring the temperature and humidity of a freezer, a heating cabinet and kitchen instruments at the elementary, junior and high school. After gathering the data, It is compared with a standard food poisoning index to provide more safe food reserves from the server. Then the server send a index to the terminal which is installed in a kitchen at any school to show the current environment. It is need an WCDMA-LTE terminal to realize smart HACCP system that is proposed from this paper. So, the proposed WCDMA-LTE terminal is designed with using a LTE modem included a 424 MHz wireless modem and a bluetooth 4.0 modem to communicate with other terminals. It can be use the monitoring system of a plastic greenhouse or remotely environment control system.