• Science of Emotion and Sensibility
• /
• v.6 no.1
• /
• pp.33-37
• /
• 2003

The objective of the present study is to develop a thermal comfort measurement system for ergonomic sensibility analysis. The system can measure basic components for thermal comfort, such as skin temperature and clothing temperature/humidity level. A study on the linearization of temperature and humidity sensors has been conducted for more accurate and stable sensor development. The software has been developed for thermal comfort analysis for both clothing thermal environments and indoor environments.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.244-248
• /
• 2001

본 논문에서는 온열환경 평가를 위한 다채널 온습도 분포측정 시스템을 개발하기 위하여 인체의 쾌적성에 영향을 미치는 온열환경요소를 분석, 이를 적용하기 위한 측정시스템의 설계개념과 요구사양에 고나하여 고찰하였다. 정밀도를 확보하기 위하여 센서의 응답성과 회로의 선형화에 관한 연구를 수행하고 사용자 편의를 도모하기 위한 분석 소프트웨어를 설계하였다. 소프트웨어는 의복내의 온열환경과 실내공간의 온열환경을 분석하기 위한 것으로 나누어져 있고 각각의 소프트웨어는 전처리와 후처리 프로그램 그리고 측정시스템과의 통신 인터페이스를 포함하고 있다. 이와 같은 설계 개념을 반영하여 다채널 온습도 분포측정 시스템이 개발될 경우, 각종 온열환경에 관한 연구에 널리 활용될 수 있을 것으로 기대한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.128-129
• /
• 2023

해당 논문은 라즈베리파이를 이용한 온실의 온습도 자동제어 시스템에 관한 연구를 다룬다. 이 시스템은 특정 작물에 대한 최적의 생육환경 제공을 위해 자동으로 온도 및 습도를 측정하고 조절한다. 관리자는 수동으로도 각 기능을 제어할 수 있다. 온습도를 제어하기 위한 방법으로 자연환기, 인공환기, 온실내부 물분사, 열선작동의 방법을 사용한다. 자동화된 온습도 제어 시스템으로 농산물의 생산량 및 품질을 늘림과 동시에 온실 관리에 투자되는 자원을 줄일 수 있어 농업인들의 농업경쟁력을 향상시킬 수 있다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1417-1418
• /
• 2015

본 연구에서는 사용자 생체신호 및 주변 환경정보를 기반으로 스트레스 이완을 돕는 IoT 디퓨저 시스템 설계와 구성을 다룬다. 개발된 디퓨저는 스마트폰 어플리케이션과 연동되어 사용자의 맥박수를 전달 받고, 또한 내장된 온습도센서에서 측정된 사용자 주변 환경정보와도 연동되어 발향 및 조명 효과를 제공한다. 개발된 디퓨저 시스템은 사용자의 심박이 다소 빠르거나 사용자에게 스트레스를 줄 수 있는 온습도 환경이 감지되는 경우 스트레스 경감과 관련된 발향 및 조명색 제어를 통해 사용자의 스트레스 조절을 도울 수 있다.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.253-258
• /
• 1999

This paper is written for the purpose of obtaining the information about the weather easily by the development of weather forecast system sensing temperature, humidity, and atmospheric pressure as key information. For this, data is obtained from the Weather Bureau, and analyzed in order to set a standard of weather forecast from the collected data. The pressure sensor and temperature-humidity sensor are fabricated using the piezoresistive effect of semiconductor, which are used to collect data. The weather forecast system is made using microprocessor.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.277-282
• /
• 2016

This study was aimed to investigate the effect of air-circulation fans on air temperature and relative humidity in a single-span tomato greenhouse (W: 7m, L: 25m, H: 3.2m). According to standard of fan layout by ASAE (1997), a total of 10 fans were bilaterally arranged in 2 rows in the experimental greenhouse. The distributions of air temperature and relative humidity were measured from 6 pm to 8 am under different conditions, with and without fans. The measurement heights were 0.7m, 1.7m and 2.7m. Under the condition of "fans off", the spatial differences of air temperature and relative humidity between upper and lower sides were $1.7^{\circ}C$ and 10.8%, respectively. The operation of 10 fans showed their differences to $0.1^{\circ}C$ and 3.2%. The number of fans and installation direction were evaluated their performance on reducing the spatial variation of air temperature and relative humidity. The experimental layouts were 5 and fans in 2 rows (bilaterally) and 10 fans in the one (same) direction. Under the condition of "6 fans on" and "5 fans on", the spatial differences of air temperature and relative humidity between upper and lower side were $0.3^{\circ}C$, 3.4% and $0.3^{\circ}C$ and 4.0%. The operation of 10 fans in the one direction reduced their differences to $0.5^{\circ}C$ and 4.9%. The overall findings of this study showed that there was no significant differences under each condition. Therefore, this study suggested that it is more economic and effective to install five fans in 2 rows (bilaterally) in the greenhouse (W: 7m, L: 25m, H: 3.2m).

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.291-296
• /
• 2014

The apartment buildings were hard to emission of water vapor by reduced infiltration. The purpose of this study was to investigate the generation of indoor temperature and humidity in the recent construction of small size apartment buildings. The temperature and humidity were measured in 3 apartments in Seongnam and Daejeon city. During the winter indoor temperature and relative humidity were measured ranged from 20 to $24^{\circ}C$ and 40 to 60%. Generated humidity caused by various characteristics of the residents, rather than external influences. Compare daytime (6:00 to 22:00) and nighttime (22:00 to 6:00), the temperature is low and absolute humidity is high at nighttime. Condensation is likely to occur at nighttime. Using the cumulative relative frequency and absolute humidity, small apartments design criteria (temperature, relative humidity) can be set.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.952-954
• /
• 2022

본 연구에서는 스마트 홈 솔루션 IoT 허브 시스템의 하드웨어를 개발한다. IoT를 통해 스마트기기의 상태를 모니터링하다가, 특정 센싱값을 받으면 제어를 통해 스마트기기를 제어할 수 있도록 개발한다. 미세먼지 측정과 온습도를 조절하고, 가정 온도를 측정하여 전자제품의 전원을 조절하는 등 홈을 자동 제어하기 위한 소프트웨어도 함께 개발한다.

• Conservation Science in Museum
• /
• v.3
• /
• pp.71-78
• /
• 2001

The airtightness of museum cases in museums was measured by using CO₂ tracing gas, but it has been pointed that it has a problem with measuring the airtightness of a museum case which has a hole inside before it is used or while is being used. So studies tried to come up with alternatives which make it possible to measure the airtightness of a museum case before it is used or while it is being used if necessary by indirectly measuring the airtightness of the museum case without changing its form. Indirect measuring is done by measuring the change of Art-sorb weight and the change of temperature and humidity inside the museum case. Experiments were made for 12 days with three builtin wall case installed at the same place without turning on the lights but with Art-sorb and the data logger of temperature and humidity put into museum case. The change rate was produced with the change of temperature and humidity inside the museum case divided by that of those around museum case. As a result, the temperature change rate of museum case A(0.67) was lower than that of museum case B(0.69) or museum case C(0.79). The humidity change rate of museum case A(0.12) was lower than that of museum case B(0.19) or museum case C(0.72) showing that its airtightness was the best. Also in the direct airtightness measurement by CO₂ tracing gas, the air exchange rate was compared with the humidity change rate by Art-sorb in the indirect measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.567-569
• /
• 2016

In this paper, utilizing an open-source platform, Arduino to display sensor data that get from temperature and humidity sensor in serial monitor, It communicates via bluetooth module so that we have developed that to monitor temperature and humidity data on Android smartphone. Using developed system, it can monitor temperature and humidity in field anytime and any categories which need above system.