• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.21-27
• /
• 2003

The copolymers with various composition of methyl methacrylate (MMA), ethyl methacrylate (EMA), methacrylic acid (MA) and hydroxyethyl methacrylate (HEMA) were synthesized for capacitive humidity sensitive materials. The capacitive humidity sensor consisted of a polymethacrylate film coated on both sides with gold electrode. Capacitance versus relative humidity increased with HEMA content in the copolymer. In the case of self-crosslinkable MMA/MA/HEHA= 40/10/10, the average capacitance at 30%RH, 60%RH and 90%RH are 102, 134 and 166 pF, respectively. And also, the hysteresis, temperature cycle and long-term stability were evaluated as a capacitance humidity sensor.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.409-414
• /
• 2004

A signal processing system of long period grating sensor that works in the optical wavelength domain is proposed. The system is based on a wavelength-swept semiconductor light source that includes an SLD and a F-P tunable filter. The hysteresis effects of PZT in the F-P filter is compensated by using an etalon filter and an athermal Fiber Bragg Grating. The detected signals from the photodiode are transmitted to a computer using an A/D converter and the result of the process is displayed in the monitor.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.303-306
• /
• 1994

Fundamental characteristics of giant magnetostrictive alloy $Terfenol-D(Tb_{0.3}Dy_{0.7}Fe_{1.9~1.95})$ are rreasured and discussed on the application for actuators. The magnetostriction is measured by laser displacement rreasuring system and the applied compressive stress is measured by load cell. Magnetostrictions increased as the applied compressive stresses increased. When the stress is 7 MPa, the magnetostriction is 1000 ppm at 1500 Oe. As the stresses iocreased from 0 to 14 MPa, the magnetic fields for saturating the magnetostriction also increased. The temperature increased during the experiment is $0.3^{\circ}C$, so the thermal expansion is negligible in these experirrents. The feedback or temperature control function should be added for the precise position control actuator.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.598-605
• /
• 1993

Methacryloxyethyl dimethyl alkyl($C_{1}\sim C_{12}$, benzyl and 2, 2-diethoxy ethyl) ammonium bromide monomers were prepared to investigate the relative humidity characteristics for polymer electrolytes with different chemical structures. They were coated on the alumna substrate printed comblike gold electrode by photopolymerization after micro-syringe injection. As the thickness of rhe humid membrane increased, the impendance decreased, whereas the impedance ~ncreased as the carbon cham of alkyl substituent in the monomer increased. The impendance of the polymeric electrolytes with $C_6\sim C_8$ substituents were varied from 19M$\Omega$ to 5K$\Omega$ for the range of 30-90% Mi. The temperature depedence coefficient in the range of 15-$35^{\circ}C$ was found to be -0.45% $RH/^{\circ}C$and the hysteresis falled within the range of $\pm$2% RH. The response time was 35 second for varying humldity from 33% to 85% RH.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.31-37
• /
• 1996

This paper presents characteristics of pressure sensor using shear-type piezoresistor of LPCVD(low pressure chemical vapour deposition) grown polycrystalline silicon films. The sensor has 3.1mV/V of pressure sensitivity in the pressure range of $1kgf/cm^{2}$, ${\pm}0.012%FS/^{\circ}C$ of TCO, and ${\pm}0.08%FS/^{\circ}C$ of TCS in the temperature range of $-20{\sim}+125^{\circ}C$. It showed ${\pm}0.2%FS$ of hysteresis and ${\pm}1.5%FS$ of non-linearity. Shear-type polycrystalline silicon pressure sensor can eliminate temperature dependence of offset caused by resistors mismatch and be used in relatively wide temperature range, compared to the conventional full-bridge silicon pressure sensors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.117-125
• /
• 2014

The temperature distribution of steady state rolling tires with detailed tread blocks is numerically predicted using the three dimensional full patterned tire model. A three dimensional periodic patterned tire model is constructed by copying 1-sector mesh in the circumferential direction. Using the static tire contact analysis, the strain cycles during one revolution are approximated with the strains at Guassian points of the elements which are sector-wise repeated within the same circular ring of elements, by neglecting the tire rolling effect. Based upon the multi-axial fatigue theory, the maximum principal strain is used to represent the combined effect of six strain components on the hysteretic loss. In the following, the deformation due to the inflation and vertical load is calculated using ABAQUS. Then heat generation rate in each element is calculated using an in-house code. Lastly, temperature distribution is calculated using ABAQUS again. Through the numerical experiments, the validity of the proposed prediction method is examined by comparing with the experiment and the temperature distribution of a patterned tire model is compared with those of the main-grooved simple tire model.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.461-466
• /
• 1999

The humidity sensor containing ammonium salt was prepared from the copolymer of 2-methacryloxyethyl dimethyl 2-hydroxyethyl ammonium bromide (MDHAB)/MMA/DAEMA = 6/3/1. The humid membrane was fabricated on the gold/alumina electrode by dipping. The impedances were $298k{\Omega},\;11k{\Omega}$, and $2.3k{\Omega}$ at 40%RH, 70%RH and 90%RH, respectively, at $5^{\circ}C$ and the humidity-sensitive characteristics were suitable for low temperature humidity sensor. The temperature-dependent coefficient between $5^{\circ}C$ and $20^{\circ}C$ was found to be $-0.80%RH/^{\circ}C$ and the hysteresis falled in the ${\pm}2%RH$ range. The response time was found to be 38 sec for the relative humidity ranging from 34%RH to 88%RH at $20^{\circ}C$. The reliabilities such as temperature cycle, humidity cycle, high temperature and humidity resistance, electrical load stability, stability of long-term storage and water durability were measured and evaluated for the application as a humidity sensor.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.554-560
• /
• 1998

Vinylbenzyl triphenyl phosphonium chloride(VTPC)/styrenes=3.7 copolymer was prepared for the moisture-absorptive polyelectrolyte dew sensor containing phosphonium salts. The humid membrane was fabricated on the gold/alumina electrode by dipping. The impedances were $11M{\Omega}$, $980k{\Omega}$, $50k{\Omega}$, and $11k{\Omega}$ at 70%RH, 80%RH, 90%RH and 95%RH, respectively, at $25^{\circ}C$ and the humidity-sensitive charactristic was suitable for the dew sensor. The temperature-dependent coefficient between $15^{\circ}C$ and $35^{\circ}C$ was found to be $-0.25%RH/^{\circ}C$ and the hysteresis falled in the ${\pm}2%RH$ range. The response time was found to be 45 sec for the relative humidity ranging from 70%RH to 98%RH at $25^{\circ}C$. The reliabilities such as temperature cycle, humidity cycle, high temperature and humidity resistance, electrical load stability, stability of long-term storage and water durability were measured and evaluated for the application as a dew sensor.

• Journal of Advanced Marine Engineering and Technology
• /
• v.15 no.1
• /
• pp.85-95
• /
• 1991

All physical systems are nonlinear to some degree. The examples are relay, backlash, deadzone, saturation element and so on. In the linear control system design, it is useful method to restrict the nonlinearity to the linearity of system over the operation range. It is worth noting that nonlinearities may be intentionally introduced in to a system. A simple of an intentional non-linearity is the Bang-Bang controller which uses the On-Off relay. In this paper, an angular position servosystem made of a DC servomotor controlled by a microcomputer is discribed. Authors use two methods in the design of controller. The one is linear controller designed by the optimal feedback control theory only and the other is nonlinear controller designed by On-Off relay with optimal feedback control theory. To do the real time control, the controller is designed by using 16bit personal computer and A/D.D/A converter(12bit) is used in order to convert the signal. According to this way, the results from real time control are as follows. 2) Under the On-Off controller with hysterisis the influence of disturbance is considerably smaller than the linerar controller. 3) An increase in the sampling period has a destabilizing effect. 4)In the controller performance, the response time of the On-Off controller is longer than that of the linear controller. To close, we note that the On-Off controller with hysterisis is more attractive than the linear controller in the presence of the input limit.

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.514-522
• /
• 1993

본 연구에서는 Ag/ 첨가에 의한 YB $a_{2}$C $u_{3}$ $O_{7-{\delta}}$산화물의 초전도 특성 변화를 조사하였다. Ag가 첨가된 YB $a_{2}$C $u_{3-x}$A $g_{x}$ $O_{7-{\delta}}$ 산화물 시료를 만들고 이 시료들에 대한 X-ray 회절분석, IR흡수 스펙트럼분석, 임계온도(Tc)측정 및 자화(M-H)특성 측정등을 통하여 제조된 시료의 물리적 성질을 조사하였다. X-ray 회절실험 결과로 부터 x.leq.0.03인 경우에는 YB $a_{2}$C $u_{3-x}$A $g_{x}$ $O_{7-{\delta}}$가 단일상의 물질로 존재하고 x가 증가함에 따라 불순물상( $Y_{2}$ $O_{3}$, 순Ag)이 나타남을 알 수 있었다. IR흡수의 실험결과에서 Cu와 치환되어 들어간 Ag의 Ag-O 결합에 의한 흡수 스펙트럼(670$cm^{-1}$ /)이 관측되었다. 실험 결과로 부터 치환된 Ag의 양 x가 증가함에 따라 Tc가 조금씩 낮아지는 경향이 있었으며 자화의 세기 및 임계자장( $H_{C2}$)은 급격히 감소함을 알 수 있었고 또 M-H특성곡선에는 히스테리시스 특성이 나타났다.났다..났다.다.