• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.256-267
• /
• 1987

Changes of light intensity under and above shading materials were measured at different relative light intensity(R.L.I. 5% of common straw shading, 15% of polyester shading and 20% of polyester shading at 12 o'clock on clear day) and lines(lst, 3rd and 5th lines) on clear and cloudy days in 5-year -old ginseng plant populations. Rates of photosynthesis and respiration, microclimate and root yield were also measured in field. Air temperature of R.L.I. 5% were lower 2$^{\circ}C$ compared with R.L.I. 15% and lower 3$^{\circ}C$ compared with R. L. I. 20% from 12 to 14 o'clock on clear day, but there were not difference among R. L. I. on cloudy day. Relative humidity of R. L. I. 5% were higher 5% compared compared with R.L.I. 20% from 10 to 14 o'clock on clear day, R. L. I. on cloudy day. Light intensity were below 5,000 lux at R.L.I. 5%, about 15,000 lux at R.L.I. 15% and about 20,000 lux at R.L.I. 20% from 10 to 15 o'clock on clear day. But light intensity were below 3, 000 lux at R. L. I. 5% about 10, 000 lux at R. L. I. 15% and about 15, 000 lux at R. L. I. 20% from 10 to 15 o'clock on cloudy. Photosynthetic rate of R.L.I. 15% and R.L.I. 20% were higher compared with R.L.I. 5% on clear and cloudy days. Tatal photosynthesis in a day were increased by R.L.I. 5%, 20%, 15% in turn on clear and cloudy days. R. L. I. 15% and 20% were not notable difference of photosynthetic rates among lines but R. L. I. with R. L. I. 15%, and higher 8% but there were not different among 5% was notable difference of one. Root fresh weight were increased by R.L.I. 5%, 20% and 15% in turn and R.L.I. 15% and 20% were not notable difference of root yield among lines but R. L. I. 5% was notable difference of one.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.103-126
• /
• 2010

The development of an industry including distribution sector is influenced by not only government policy but the related firms' behaviors. Recently the large-scale retailers have had more enormous channel power than any other distributors including monopolistic makers. Now is the time for government to prepare some policies against the unfair transaction behaviors by large-scale retailers. In this paper I tried to inquire into the distribution competition policy from a political correspondent point of view related with the transition of distribution system. For the purpose of this article I compared the case of Korea with Japan. According to the results so far inquired, there are some commons and differences in the cases of the two. Some suggestions are as follows. Considering the predominant position the concept of large-scale retailers is to be extended from a single store to numerous chain stores in the political level. Government needs to examine the standard propriety for large-scale retailer; the size of selling area and amount of sales a year. When a large-scale retailer store is to be established, it need to be taken a permit or a pre-inspection. The Fair Trade Commission have to secure the neutrality from Government's strategies. And government should find out the examples of unfair transaction behavior types and prepare some proper guidelines continually. For the last time statistical data by distributors are to be fitted out and the actual investigations for estimating the effects of government policies need to be enforced.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.47-75
• /
• 2016

This study has analyzed the history of the subcontract animation in Korea that began with Golden Bat of TBC Animation Division in 1966 to 1980s and shed the light on the history of subcontract animation that has been processed over 30 years in Korean animation. For this purpose, through the outlined status of subcontract animation, such as, production company, production status, scale of industry and so forth, the status of the OEM industry then has been checked and it links the solidified background of animation into subcontract production industry with the situation in time for analysis. In addition, on the basis of the foregoing, it is intended to broaden the horizon of the history of animation through the analysis on new search for facilitating the creative animation by overcoming the issues and limits generated by the subcontract animation industry. 1970s was the time that the national objective is to advance heavy-chemical industry and export-led economic growth. From the late 1970s, the animation has been spot lighted as the main-stream export industry through the overseas subcontract orders for animation. Expansion of the subcontract animation production has been influenced from the national policies on public culture, dispersion of color TV, facilitation of video production market and other media changes of the time that led the decline of animation audiences in theaters, and another cause would be in lack of platform of broadcasting companies that avoided the independent animation production for its economic theory. The subcontract animation industry may have the positive evaluation in the aspect of expanding the animation environment, such as, structuring of animation infra, development of new human resources and etc. However, the technology-incentive 'production'-oriented advancement has created distorted structure in advancing the professional human resources due to the absence of 'pre-production' of planning and others as well as the insufficient perception on 'post production (post work)', and it was unable to formulate domestic market by re-investing the capital accumulated for OEM industry into the production of creative animation and it has been assessed as negative aspect. Animation is a cultural and spiritual product of a country. Therefore, the systematic support policy for the facilitation of the creative animation, such as, development of professional human resources, creation of outstanding work, formation of market to make the pre-circulation structure and so forth has to be sought. However, animation is an industry, but there is no perception that it is a cultural industry based on the creativeness, not hardware-oriented manufacturing business. Such a lack of recognition, there was no policies to make the market and facilitate the creative animation by the animation of Korea for this period through the long-term plan and investment for independent work production. Such an attempt is newly begun through diverse searches for protection and advancement of creative animation in Korea after 1990s.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.138-150
• /
• 1993

Experiments were carried out to understand how much do the environmental factors affect growth and tuber formation of arrowhead, Sagittaria trifolia L. The more the light transmittance decreased, the more the numbers of leaves and floral axes decreased. The dry matter weight of tops and the number and the fresh weight of formated tuber were significantly different between the light transmittance of more than 50% and that of less than 30% at the 5% level of DMRT. Plant height, number and width of leaves, and number of floral axis were affected by the Light spectra. And the degree of their effects on growth of arrowhead was different form the light spectrum. The natural light and the clear cellophane film were the most effective to increase the number and the fresh weight of formated tuber and the green spectrum was the least effective to do those. Plant height grown at 0-5cm water depth was shorter than that at 10-20cm water depth. The deeper the water depth was, the lower the leaves number was. The fresh weight and the number of arrowhead tuber were most produced at 0cm water depth and theose were least at 20cm water depth. The shoot growth and the tuber formation of arrowhead was much increased with increase of the application rate of fertilizer. The difference of the transplanted tuber size was not affected at the shoot growth, but tuber formation of arrowhead was increased with increase of the transplanted tuber size. From viewing the effect of temperature after rice heading, the shoot growth and the tuber formation at $35^{\circ}C$ were also higher than those at $25^{\circ}C$.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.350-363
• /
• 2009

Inter- and intra-specific differences in removal activities, filtering rates (FR) and production of feces-and pseudo-feces (PF) between a native freshwater bivalve in Korea, Anodonta woodiana Lea and Unio douglasiae Griffith et Pidgeon, were compared using a continuous removal of organic matters (CROM) system. The CROM system comprised five steps; input of polluted water, control of water flow, mussel treatment, analysis of water quality and discharge of clean water. The study was designed to compare the removal activity of organic matters between A. woodiana and U. douglasiae, and the intra-specific differences between density and length in A. woordiana. Results clearly indicate that two kinds of mussels had obvious removal activities of seston in the eutrophic reservoir. First, if both are similar in shell length, there were no significant inter-specific differences in removal activity between A. woordiana and U. douglasiae (P>0.5), but FRs of U. douglasiae was relatively high due to low ash-fee dry weight. Second, if both are same in animal density, the smaller mussels (1$\sim$2 years old) showed a higher filtering rate and production of feces- and pseudo-feces and less release of ammonium than the larger mussels. Third, if both are same in biomass, FRs and PF of mussels were higher in the low-density tank than the high-density tank, While the Concentration of $NH_4$-N and $PO_4$-P released WRS similar to each other (P>0.5). Therefore, these results suggest that CROM system using a young bivalve A. woordiana can be applied to control the nuisance seston in eutrophic lake system, if a relevant species and density were selected. Additional pilot tests to optimize the age and density of domestic bivalves were needed for the generalization of CROM operation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.215-231
• /
• 2020

Forest landscape models (FLMs) can be used to investigate the complex interactions of various ecological processes and patterns, which makes them useful tools to evaluate how environmental and anthropogenic variables can influence forest ecosystems. However, due to the large spatio-temporal scales in FLMs studies, parameterization and validation can be extremely challenging when applying to new study areas. To address this issue, we focused on the parameterization and application of a spatially explicit forest landscape model, LANDIS-II, to Mt. Gyebang, South Korea, with the use of the National Forest Inventory (NFI) and long-term ecological research (LTER) site data. In this study, we present the followings for the biomass succession extension of LANDIS-II: 1) species-specific and spatial parameters estimation for the biomass succession extension of LANDIS-II, 2) calibration, and 3) application and validation for Mt. Gyebang. For the biomass succession extension, we selected 14 tree species, and parameterized ecoregion map, initial community map, species growth characteristics. We produced ecoregion map using elevation, aspect, and topographic wetness index based on digital elevation model. Initial community map was produced based on NFI and sub-alpine survey data. Tree species growth parameters, such as aboveground net primary production and maximum aboveground biomass, were estimated from PnET-II model based on species physiological factors and environmental variables. Literature data were used to estimate species physiological factors, such as FolN, SLWmax, HalfSat, growing temperature, and shade tolerance. For calibration and validation purposes, we compared species-specific aboveground biomass of model outputs and NFI and sub-alpine survey data and calculated coefficient of determination (R²) and root mean square error (RMSE). The final model performed very well, with 0. 98 R² and 8. 9 RMSE. This study can serve as a foundation for the use of FLMs to other applications such as comparing alternative forest management scenarios and natural disturbance effects.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2015

The aim of this study was to investigate microbiological contamination levels in the manufacturing company of ginseng products (white and red ginseng). Firstly, the contamination level for ginseng and each stage ginseng were 1.8~4.9 log CFU/g (total bacteria), 1.2~3.0 log CFU/g (coliform), 0.8~4.1 log CFU/g (fungi). However, only Bacillus cereus among pathogenic bacteria was detected from a few sample. The contamination of total bacteria tended to decrease as ginseng was being processing. Therefore, that of finished products (white and red ginseng) showed the lowest contamination level among each stage ginseng sample. That of fungi decreased steadily, although the contamination of fungi has tended to increase right after ginseng was steamed. Secondly, the contamination level for working tools and facilities were $1.7{\sim}4.7log\;CFU/cm^2$ (total bacteria), $0.4{\sim}4.0log\;CFU/cm^2$ (coliform), $0.9{\sim}4.2log\;CFU/cm^2$ (fungi). Especially, washing and peeling machines were higher contamination level. Finally, the contamination level of worker who washed and steamed ginseng was higher than worker who shaped, sorted and stored ginseng. Also, Staphylococus aureus was detected at 0.2~0.7 log CFU/hand on some wokers' hands. These results showed proper heating condition (temperature and time) and tidy manufacturing facility are the most important to avoid developing any microbiological problem of Ginseng Products.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.347-358
• /
• 2004

In Mongolia which consists of nomadic populations, horse has been loved by nomads and considered most important transportation means. Horses have been used when they were making long journey looking for new plain ground for grazing. Therefore, horse is closely connected with Mongolian nomadic culture. In Korea, too, horses had been considered one of most important means for transportation and military. The symbolism of horse that is represented in both Mongolia and Korea is Heavenly Horse which communicates with the God and it was sanctified as a Sacrificing Horse which was sent to God for sacrifice, and it was even worshiped as Divine Horse, the diety. As is the case of two of Mongolian customs associated with Mongolian language are 'the ceremony of horse's giving birth her young' and 'the ceremony of letting the mare go where it was before', all the cases are related with cattle's milk. The ceremony of 'horse's giving birth her young' is the ceremony where people hope that they would see the young can grow well which were born in early summer thus increasing the numbers of horse. To go with this, they perform a ceremony of Chachal in which they sprinkle the best quality white milk which is the symbol of good luck and hope they would produce plentiful of dairy products. The ceremony of 'letting the mare go where it was before' is also the ceremony where people hope to have many new born young horses thus produce more dairy products and Airag for the next year as milking is no more available for that you. Since the unified Silla Era, Koreans have performed a sacrifice rituals to horse in auspicious day. It's purpose is to see their horses get no disease and bear as many youngs as possible. The Back Ins Je, one of well blown festivals in Jeju Island, was originated from people's wish to prosper in stock farming. It can be said that the custom of Korea and Mongolia related with horse's giving birth was originated from the wishes to god for fertility and fecundity. On top of that, while Mongolians sprinkled horse's milk both on the ground and to the air hoping they would have increased houses and, thus, secure many dairy products, Koreans wish that they would see the increased number of horses and their healthy conditions through heavenly rituals.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.438-449
• /
• 1994

This paper focuses on recontextualizing geography curriculum, i.e. examining recent changing aspects in three geography curriculum locators-society, student and discipline of geography-and searching future directions of geography curriculum in light of such changes. For conciliation and reflection of changing aspects of each locators, this paper dealt with social issues and societal changes in terms of locator of society, increased concern to student and development of cognitive science in terms of students, and challenging views on science and the meaning of epistemological changes in geography in terms of discipline. As a result, three future directions in geography curriculum are searched : issue-based geography curriculum, thinking geography curriculum, geography curriculum toward equity and accessbility.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.677-687
• /
• 1999

This study was performed to evaluate the effect of aging and thermal cycling on the tensile strength of six commercially available glass-ionomer materials: two chemically set glass-ionomer materials(Fuji II, Fuji IX), two resin-modified glass-ionomer materials(Fuji II LC, Vitremer), and two polyacid-modified composite resins(Compoglass, Dyract). Rectangular tension test specimens were fabricated in a teflon mold giving 5mm in gauge length and 2mm in thickness. All samples were divided into 3 groups. Group 1 was immersed in a $37^{\circ}C$ distilled water for 1 hour. Group 2 was immersed in a $37^{\circ}C$ distilled water for 30 days. Group 3 was subjected to 10,000 thermal cycles between $5^{\circ}C$ and $55^{\circ}C$, and the immersion time in each bath was 15 seconds per cycle. Tensile testing was carried out at a cross-head speed of 0.5mm/min and fracture surfaces were examined with scanning electron microscope. The results obtained were summarized as follows; 1. The polyacid-modified composite resins were stronger than the resin-modified glass-ionomer materials, which were much stronger than the conventional glass-ionomer materials. 2. Tensile strengths were slightly increased after aging treatments for 30days. 3. Tensile strengths of conventional glass ionomers were significantly increased after thermal cycling treatment(p<0.01). 4. The highest tensile strength value of 45.4MPa was observed in the Dyract group and the lowest value of 13.3MPa was observed in the Fuji II LC group after the thermal cycling test, and the strengths of polyacid-modified composite groups were significantly higher than those of other groups. 5. The highest characteristic strength value of 48.6MPa was obtained in the Dyract group, however the highest Weibull modulus value of 8.9MPa was obtained in the Compoglass group after thermal cycling test.