• Asian Journal of Turfgrass Science
• /
• v.15 no.4
• /
• pp.169-179
• /
• 2001

This study was conducted to determine the effect of root zone cooling on growth and quality of turfgrasses including Kentucky bluegrass (Poa pratensis L.‘Nuglade’), perennial ryegrass (Lolium perenne L.‘Accent’), tall fescue (Festuca arundinacea Schreb.‘Pixie’), and Japanese lawngrass (Zoysia japonica Steud.) in simulated athletic field during summer season in Korea. Mineral contents in clippings of turfgrasses grown at different soil mixtures and temperatures were also analyzed. Root zone cooling (approximately 4~6$^{\circ}C$ lower than that of untreated-control) resulted in good uniformity, little disease incidence and higher level of chlorophyll contents in cool-season turfgrasses. The effectiveness of root zone cooling in protecting disease incidence from high temperature stress was the most manifest in perennial ryegrass compared to others. Fresh clipping weight in treatment of root zone cooling was increased approximately 2 times in Kentucky bluegrass and perennial ryegrass, and 2.5 times in tall fescue compared to those of control. There was higher growth rate in a soil mixture composed of 80% peat moss ＋10% sand ＋10% soil (v/v/v) than in that of 80% pea moss ＋20% sand (v/v), Mineral contents of N, P, K, Ca, and Mg in clippings of three species of cool-season turfgrasses were significantly increased in treat-ment of root zone cooling but this was not found in Japanese lawngrass. Results showed that root zone cooling has a benefit in keeping good quality and growth of cool-season turfgrasses in sports field under supraoptimal ambient temperature during summer season.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1643-1652
• /
• 2020

To investigate the characteristics of detailed flows in a building-congested district, we coupled a computation fluid dynamics (CFD) model to the local data assimilation and prediction system (LDAPS), a current operational numerical weather prediction model of the Korea Meteorological Administration. For realistic numerical simulations, we used the meteorological variables such as wind speeds and directions and potential temperatures predicted by LDAPS as the initial and boundary conditions of the CFD model. We trilinearly interpolated the horizontal wind components of LDAPS to provide the initial and boudnary wind velocities to the CFD model. The trilinearly interpolated potential temperatures of LDAPS is converted to temperatures at each grid point of the CFD model. We linearly interpolated the horizontal wind components of LDAPS to provide the initial and boundary wind velocities to the CFD model. The linearly interpolated potential temperatures of LDAPS are converted to temperatures at each grid point of the CFD model. We validated the simulated wind speeds and directions against those measured at the PKNU-SONIC station. The LDAPS-CFD model reproduced similar wind directions and wind speeds measured at the PKNU-SONIC station. At 07 LST on 22 June 2020, the inflow was east-north-easterly. Flow distortion by buildings resulted in the east-south-easterly at the PKNU-SONIC station, which was the similar wind direction to the measured one. At 19 LST when the inflow was southeasterly, the LDAPS-CFD model simulated southeasterly (similar to the measured wind direction) at the PKNU-SONIC station.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.499-505
• /
• 2011

The mixing behavior of turbidity currents in a reservoir is closely related with the annual temperature change of the reservoir. In the summer, the reservoir has a well defined structure: one or two thermoclines and some layers of different densities. This density stratification inhibits vertical mixing and affects various hydrodynamic processes within the reservoir. Therefore, many reservoirs can be operated to release water of the specific quality with the selective withdrawal. In this study, the hydraulic experiments were performed to analyze the efficiency of selective withdrawal. The velocity distributions are measured with PIV in the stratified tank with the "two-tank" method. The relationship between the Richardson number and the selective withdrawal efficiency are provided using the measured velocity distributions.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.371-379
• /
• 1980

The spectral properties of the solvated electrons in tetrahydrofuran(THF)-water binary system have been investigated. In this study, the solvated electrons have been produced by applying nsec Q-switch Nd(YAG) laser photolysis technique. The experimental method photolysis were schematically described. The solvent and the temperature effects on the absorption spectrum of solvated electrons have also been studied. The observation of the spectrum with increasing THF content and temperatue showed a trend that the former shifted to longer wavelength and the other showed broadening effect. The half-life of solvated electrons were also increased with THF content. The absorption maxima of the mixtures were always observed in the middle of that of pure water and THF. The correlation between the volume and the absorption energy of solvated electrons were discussed from the results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.202.1-202.1
• /
• 2015

탄소의 $sp^2$ 혼성으로 이루어진 2차원 단일시트(two-dimensional single sheet)인 그래핀은 기계적, 열역학적, 전기적 특성이 매우 우수하며 특히 고유연성과 투명성을 가진다는 장점 때문에 오랜 기간 주목 받으며 다양한 분야에서 연구되어 왔다. 이러한 그래핀을 만드는 방법에는 화학적 증기 증착법 및 흑연으로부터의 물리적, 화학적 박리 방법이 있다. 양질의 그래핀을 대면적에서 획득 할 수 있는 화학적 증기 증착법의 경우 높은 공정 비용과 함께 수반되어야 하는 전사과정의 어려움으로 인하여 실제 상용화에 어려움이 있다. 이러한 단점의 극복을 위해 대량의 그래핀을 저렴하게 확보 할 수 있는 화학적 박리 방법이 주목을 받고 있다. 화학적 박리 방법의 경우 박리 과정에서 수반되는 산화 그래핀의 환원과정이 필요하였으며, 이를 위해 강력한 환원제를 이용한 화학적 환원 방법, 고온에서의 열처리를 이용한 열역학적 환원 방법, 및 빛을 노광시켜 산화 그래핀을 환원시키는 광학적 방법이 시도되었다. 화학적 및 열역학적 환원방법의 경우 고품질의 환원된 산화 그래핀을 획득 할 수 있으나, 강한 환원제 및 높은 열처리 온도로 인하여 유연 기판의 사용이 제한되는 단점이 있다. 이러한 단점을 극복하기 위해 빛을 이용한 광학적 방법이 제시되었으나, 환원과정에 사용되는 단파장의 자외선 광원의 높은 가격으로 인하여 경제성의 확보가 제한된다. 본 논문에서는 우수한 광학적 특성을 보이는 란타넘족 이온을 사용하여 선택적 파장 대에서 높은 광흡수도를 가지는 산화 그래핀-란타넘 이온 혼합용액을 만들었으며, 가시광선대역의 파장을 가지는 레이저를 사용하여 우수한 품질을 가지는 환원된 산화 그래핀을 제작하였다. 구체적으로 산화 그래핀은 modified hummer's method를 이용하여 만들어졌으며, 자외선 대역을 흡수하는 $Gd_{3+}$, 녹색 레이저를 흡수하는 $Tb_{3+}$, 적색 레이저를 흡수하는 $Eu^{3+}$를 1 mM 섞어주었다. 그 후, 300~800 nm의 파장을 가지는 레이저를 $1mW/cm^2$를 노광시켜 산화 그래핀을 환원시켰다. 환원된 산화 그래핀의 특성은 FT-IR, UV-Vis, 저온 PL, SEM, XPS 및 전기측정을 이용해 측정하여 재현성 및 반복성을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.355-365
• /
• 1991

New definition for the interaction of flames is introduced and interacting turbulent diffusion flames issuing from two rectangular nozzles are investigated on the basis of the definition. Theoretical study through numerical model is carried out and experiment for validation is conducted. The characteristics of interaction due to the variation of major parameters such as nozzle spacing, Reynolds number and nozzle aspect ratio are studied. Results show that strong interaction occurs for small nozzle spacing, small Reynolds number and large aspect ratio. In order of their magnitude, the intensity of interactions on the individual transport mechanism is momentum, heat and mass. It is also found that interaction makes flames longer, tilted and finally merged. Increase of velocities and temperature, decrease of oxygen concentration and depression of turbulence are occurred in the region between flames.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1679-1688
• /
• 1990

The method of nonlinear parameter estimation(NPE), which is a statistical and an inverse method, is used to estimate the thermal diffusivity of the porous insulation material. In order to apply the NPE method for measuring the thermal diffusivity, and algorithm for programing suitable to IBM personal computer is established, and is studied the statistical treatment of experimental data and theory of estimation. The experimental data obtained by discrete measurement using a constant heat flux technique are used to find the boundary conditions, initial conditions, and the thermal diffusivity, and then the final values are compared with the values obtained by some different methods. The results are presented as follows:(1) NPE method is used to establish the estimation of the thermal diffusivity and compared results with experimental output shows, that this method can be applicable to define the thermal diffusivity without considering hear flux types. (2) Because of all of the temperatures obtained by the discrete measurement on each steps of time are used to estimate the thermal diffusivity. Although some error in the temperature measurements of temperature are included in estimating process, its influences on the final value are minimzed in NPE method. (3) NPE method can reduce the experimental time including the time of data collecting in a few minutes and can take smaller specimen compared with steady state method. If the tube-type furnace is used, also the adjusting time of surrounding temperature can be reduced.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.291-291
• /
• 2009

한국원자력연구원의 파이로 실험 시설인 ACPF (ACP Facility)에는 공학규모 전해환원 반응기가 설치되어 공정 대용량화를 위한 연구가 수행되고 있다 본 연구에서는 전해환원 공정의 Scale-up을 위해 기존 반응기를 개선하여 전해환원 실험을 수행한 결과를 담고 있다. 장치의 대형화 빛 원격운전성 향상을 위해 기존의 전해환원 반응기의 상부 플랜지는 보다 간단하게 정리되었으며 염 이송에 의한 고온 조건 노출 시간을 줄임과 동시에 염 재사용을 목적으로 상부 플랜지는 이중으로 설계되었다. 따라서, 반응 종료후 전극이 설치된 상부 플랜지를 들어 올림으로서 반응기를 불활성 분위기로 유지하는 동시에 전해환원 금속전환체를 회수 할 수 있도록 반응기가 제작되었다. 또한, 새로운 반응기는 용융염 내의 강제 유동을 위해 아르곤 버블링이 가능하도록 설계 제작되었다. 새로 제작 설치된 전해환원 반응기를 사용하여 산화물 분말을 혼합하여 준비한 모의 사용후핵연료를 사용하여 전해환원 실험을 수행하였다. 그 결과, 산화물이 충진된 음극의 전영역에서 고루 96% 이상의 높은 금속전환율을 얻었으며 시간에 따라 선택된 FP들의 용융염 내 거동을 측정하였다. 실리더 형태의 음극에서 Cs, Sr 등의 원소들이 용융염으로 시간에 따라 용출되는 것을 확인하였으며 동시에 반응기 재질인 Fe 등도 일부 용융염에서 검출되었다. 아르곤 버블링에 의한 강제 유동은 전압 및 전류 거동에는 큰 영향을 미치지 못하였으나 염의 휘발량을 증가시켜 영조성올 변화시키는 것으로 측정되었다. ACPF의 전해환원 실험결과를 바탕으로 반응기를 상부 기체상과 하부 액체상으로 나누어 전산모사를 수행하였다 상부 기체상은 유입되는 아르곤 기체와 발생되는 산소기체의 흐름을 모사하는 결과를 얻었으며 온도 및 산소의 분압을 계산하였다. 하부 액체상에서는 전기장을 모사하여 전류 밀도 등을 3차원으로 모사하였다.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.9-14
• /
• 1995

For the development of liquid density measuring sensor using the natural frequency of a pipe, its principle and construction method were described. The stainless steel pipe, which has length of 32 cm, inside diameter of 2.3 cm and outside diameter of 2.5 cm, was used for the sensor. The exciting coil and the photo sensor were used to excite and to pick-up it, and the feedback circuit was designed to continue its vibrating. The natural frequency was consistent with the result of the spectrum analysis. It had a linearity of 0.0027 % and a sensitivity of 0.032 % in liquid density range from $0.8\;g/cm^{3}$ to $1.4\;g/cm^{3}$ and its frequency variation ratio was 0.024 $%/^{\circ}C$ in temperature range from $10^{\circ}C$ to $35^{\circ}C$.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.90-93
• /
• 2008

We developed a variety of polymeric jelly phantoms that can be used in hyperthermia using an electromagnetic wave as an auxiliary cancer therapy. Particularly, using an appropriate material composed of polyethylene, deionized water, and sodium chloride, jelly phantoms for brain was prepared. Also, their electrical properties were characterized by measuring the dielectric constant and conductivity. As the results, overall electrical values of the phantoms decreased with increasing the amount of the components of the materials, excepted for sodium chloride. Additionally, storage characteristics of the phantoms showed a sustainable stability up to 6 months. Based on the experimental results, it can be proposed that jelly phantoms containing a ferro-magnetic particle could be a potential material for cancer therapy following the further study on the temperature elevation effect and the evaluation of electromagnetic properties of the materials.