• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1999

High quality pure and Nb-doped $PbWO_{4}$ Single Crystal were grown from a 50 %~50 % mixture of Lead oxide (PbO) and Tungsten oxide $(WO_{3})$ by Czochralski method in Iridium crucible. The stoichiometric deviation correspond to the selective loss of the crystal constituents is found to be responsible for the yellowish coloration of $PbWO_{4}$. Through the X-ray powder diffraction experiment, we have investigated the lattice constant variations of each $PbWO_{4}$ crystals. We also present information on their photoluminescence (PL), optical absoption properties and Raman spectra. The temperature dependence of PL intensity and FWHM (Full Width Half Maximum) were measured in the temperature range 10 K~300 K. One observes a slight temperature dependence in the low temperature region and PL intensity decreases over 200 K by thermal quenching. The activation energy, Huang-Rhys coupling constant and inhomogenious brodenning acquired from their temperature dependence.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.45-50
• /
• 1999

We report a solder-clad fiber Bragg grating(FBG) temperature sensor in order to obtain better Bragg wavelength sensitivity to temperature than a bare FBG sensor. The solder-clad FBG sensor shows a wavelength sensitivity improvement by a factor of four compared to the case of a bare FBG sensor at temperatures below $110^{\circ}C$. However, it has a sensitivity of 0.01 $nm/^{\circ}C$ at temperatures over $110^{\circ}C$, which is identical to that of a bare FBG sensor. Bragg wavelength of the sensor shows a blue-shift below $110^{\circ}C$ because the sensor is fabricated above melting temperature of solder. The thermal stress at the FBG-solder interface has been relieved by annealing, which results in a stable operation.

• Korean Journal of Optics and Photonics
• /
• v.10 no.5
• /
• pp.419-423
• /
• 1999

Optical filters utilizing the evanescent filed coupling between the side polished fiber and polymer planar waveguide were fabricated and optical properties of the devices were measured. A scheme for reducing polarization dependent properties of the device was proposed and demonstrated experimentally. Our measurement results showed that resonance wavelengths and filtering depth of the optical filters can be determined by adjusting thickness of planar waveguide and polishing depth of the fiber. The device fabrication procedure including fiber polishing steps and formation of polymer planar waveguide were described. The optical characteristics of fabricated optical filers were that 3 dB bandwidth was 15 nm, the resonance wavelength difference between the TE and TM polarized response was less then 2 nm, and insertion loss was less then 0.2 dB. The measured resonance wavelength drift dut to the variation of ambient temperature was -0.35 nm/$^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.113-113
• /
• 2010

유비쿼터스 시대를 맞이하여 현재의 전자제품은 초고주파 환경에서의 소형화된 마이크로파 소자를 요구하고 있다. 마이크로파 대역에서 세라믹 소재는 대부분의 폴리머 소재에 비해 낮은 유전손실 값을 보이고 있어 향후 확대되는 고주파화에 적합한 소재로 평가되고 있다. 하지만 세라믹 재료는 깨지기 쉬운 특성을 가지고 있어 공정 및 취급이 어려우며 높은 소결온도를 가지고 있어 융점이 낮은 재료와의 집적화에 있어서 난점을 가지고 있다. 이를 위해 본 연구실에서는 실온에서 세라믹을 비롯한 금속 및 폴리머 재료의 치밀한 코팅막의 성막 및 이종 접합이 가능한 Aerosol Deposition (AD 법)에 주목하였고 마이크로파 소자 제작 공정으로서 AD 법의 응용 가능성을 연구하였다. 마이크로파 소자의 기판으로서는 AD 법을 이용하여 유전손실이 낮고 플렉서블한 $Al_2O_3$-PTFE 혼합 기판을 제작하고 적용하였다. 금속 선로 패터닝 제작 공정으로는 도금법이 대표적이지만 고비용 및 복잡한 공정 절차, 폐화학용액으로 인한 환경문제 등의 단점을 지니고 있어 이를 대체하는 금속 선로 패터닝 공정이 절실히 요구되고 있다. 이를 위해 본 연구에서는 AD 법을 이용하여 금속 필름을 제작하고 대체 공정으로서의 가능성을 확인하였다. 하지만 AD 법을 이용한 세라믹 필름 제작에 관한 연구는 크게 활성화되어 있는 반면에 금속 필름의 제작, 특성 측정 및 개선에 관한 연구는 그에 비해 미비한 수준이다. 이를 위해 이번 연구에서는 AD 법을 이용하여 금속 필름을 성막 시에 영향을 미치는 요인을 고찰하였으며 또한 마이크로파 소자의 도체 손실에 크게 관계되는 금속 필름의 비저항 특성의 측정 및 개선에 관한 연구를 수행하였다. 이를 위해 본 연구에서는 정전장 시뮬레이션을 활용하여 AD 법으로 성막된 금속 필름의 정밀한 비저항 측정에 관한 연구방법을 마련하고 후열처리를 통한 비저항 특성을 개선시키는 연구를 진행하였다.

• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.112-121
• /
• 1982

Thermal properties of 12 Korean foods were determined by using an apparatus constructed by authors. Specific heat of acorn mook showed the highest value $(0.856\;kcal/kg{\cdot}^{\circ}C)$ and that of Chungkookjang the lowest value $(0.606\;kcal/kg{\cdot}^{\circ}C)$ among 12 foods investigated. Thermal conductivity of the salted wild sesame leaf at the initial temperature of $20^{\circ}C$ was found to be the highest $(0.451\;kcal/m{\cdot}h{\cdot}^{\circ}C)$ among the foods investigated and that of mungbean mook the lowest$0.304\;kcal/m{\cdot}h{\cdot}^{\circ}C$. Thermal conductivity appeared to get higher as the initial temperature increased from $20^{\circ}C\;to\;60^{\circ}C$. Thermal diffusivity of Kochujang was the highest $(0.0877\;cm^2/min)$ and the mungbean mook the lowest($(0.0518\;cm^2/min)$ among the foods investigated. Thermal conductivity of foods also appeared to increase as the initial temperature increased. The difference between the calculated values and the measured values was very small (1.655 residual percent in the statistical analysis).

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.57-65
• /
• 2015

Electronic packages consist of various materials, and as temperature changes, warpage occurs because of the difference in coefficient of thermal expansion. Shadow $moir{\acute{e}}$ is non-contact, whole field measurement technique for out-of-plane displacement. However, the technique has low sensitivity above $50{\mu}m/fringe$, it is not adequate for the warpage measurement in some circumstance. In this paper, by applying phase shifting process to the traditional shadow $moir{\acute{e}}$, measurement system having enhanced sensitivity of $12.5{\mu}m/fringe$ is constructed. Considering Talbot effect, the measurement is carried out in the half Talbot area. Shadow fringe pattern having four times enhanced sensitivity is obtained by the image process with four shadow fringes. The measurement technique is applied to the fibered package substrate and coreless package substrate for measuring warpages at room temperature and at about $100^{\circ}C$.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.95-106
• /
• 2008

Pickled crabs made using Charybdis japonica are becoming part of our dietary habits. Yet research on this food is disappointingly scarce. It is generally accepted that the original food composition of pickled crabs defies scrutiny because various seasonings are added to soy for the production of pickled crabs in most regions. Accordingly, this study attempted to measure the food composition of the Charybdis japonica preserved in brine according to different storage days (10, 15, 20, 25, and 30 days) and different temperatures ($5{^{\circ}C}$, $15{^{\circ}C}$, and ambient temperature). It was found that Charybdis japonica is comprised of moisture (77.5％), ash (2.3％), crude protein (19.7％), and crude lipid (0.5％). The content of crude protein and crude lipid during the storage period tended to decrease over time.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.389-397
• /
• 2010

Concrete has excellent mechanical properties, high durability, and economical advantages over other construction materials. Nevertheless, it is not an easy task to apply concrete to long span bridges. That's because concrete has a low strength to weight ratio. Ultra high performance concrete (UHPC) has a very high strength and hence it allows use of relatively small section for the same design load. Thus UHPC is a promising material to be utilized in the construction of long span bridges. However, there is a possibility of crack generation during the curing process due to the high binder ratio of UHPC and a consequent large amount of hydration heat. In this study, adiabatic temperature rise and mechanical properties were modeled for the stress analysis due to hydration heat. Adiabatic temperature rise curve of UHPC was modeled superposing 2-parameter model and S-shaped function, and the Arrhenius constant was determined using the concept of equivalent time. The results are verified by the mock-up test measuring the temperature development due to the hydration of UHPC. In addition, models for mechanical properties such as elastic modulus, tensile strength and compressive strength were developed based on the test results from conventional load test and ultrasonic pulse velocity measurement.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.259-264
• /
• 2020

In this study, the humidity control effect of a counter-flow ventilator was analyzed in a greenhouse with high relative humidity at night in the winter season. A case of the counter-flow ventilator was 0.96 × 0.65× 0.82(W × D × H, m) and there were heat transfer element and two fans for air supply and exhaust in the counter-flow ventilator. Two counter-flow ventilators were used in this study and the setting humidity of the ventilators was 80%. The temperature and relative humidity at night(18:00-8:00) in the greenhouse were measured. In a greenhouse without a counter-flow ventilator, the average temperature and humidity was 14.9℃, 82.8%, respectively. When the counter-flow ventilator was operated, the corresponding averages were 15.1℃, 79.9%. The independent sample t test of monthly temperature and relative humidity showed no difference in temperature, and a significant difference in relative humidity with 1% of the significance level. Therefore, using the counter-flow ventilator helps to control relative humidity in greenhouse and increase yield.. And further research considering the pros and cons of using the counter-flow ventilator is needed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.248-256
• /
• 1995

The numerical study on the surface buoyant jets has remained of requiring more intensive investigation for problems due to the treatments of free surface, Reynolds stress/flux terms in turbulent flow and especially buoyancy effects on the turbulent fluctuation. etc. The verification of predicted results from the numerical study continues in the qualitative study. because of the lack of experimental data, which seems to be due to the difficulties in measuring the turbulent fluctuations in concentration or temperature fields. In this study, the computer program of Algebraic Stress Model has been developed to investigate the behaviours of two-dimensional surface buoyant jets with free surface boundary condition. The computational results are compared with published experimental data. By comparing these results with experimental data. it is found that this model can predict fairly well the flow characteristics of two-dimensional surface buoyant jets in the momentum-dominant region and buovancy-dominant region. Especially, it is proved that this model can predict the flow characteristics reasonably in buoyancy-dominant region stably stratified due to buoyancy effect.