• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.183-183
• /
• 2000

Aigrain에 의해 Helicon이라는 이름이 명명된 이후, helicon은 저온의 금속과 같은 높은 전도도(conductivity)를 갖는 매질이나 강한 자기장이 걸려있는 plasma를 전파해 나가는 저주파 전자기장을 지칭해왔다. 이온화된 개스에서 이러한 전자기장은 전자 공명 주파수(electron cyclotron frequency)와 이온 공명 주파수(ion cyclotron frequency) 사이의 주파수로 전파하며 전리층 (ionosphere)을 통과하며 발생하는 가청 주파수 영역대의 음조가 강하하는 현상에 의해 low-frequency whistler라고도 불린다. Helicon wave plasma는 Boswell에 의해 처음 발생된 후, 높은 이온화율(~100%)로 인해 많은 연구가 이루어져 왔다. 1985년에 Chen은 helicon plasma의 높은 이온화율을 설명하기 위해 Landaudamping을 제시하였다. 이러한 설명은 1997년에 Shamrai에 의해 TG mode가 도입되기 전까지 직접적인 실험결과 없이 helicon plasma 발생의 mechanism으로 받아들여졌다. shamrai의 이론에 의하면 정전기파(electrostatic wave)는 plasma의 표면(surface)에서 강하게 감쇄되어 energy를 전달하게 된다. Cho는 radial density 분포가 외각보다 중심이 높을 경우 TG wave의 power 전달이 중심에서 일어날 수 있음을 계산하였다. Helicon plasma의 특성은 높은 이온화율에 의한 높은 밀도($\geq$1012cm3), 1-2 kW의 rf power에서 상대적으로 낮은 전자 온도( 4eV), $\omega$ci $\omega$LH<$\omega$ $\omega$ce $\omega$pe 영역대의 주파수, 자기장 50-1200 Gauss, 압력 1-10 mTorr로 특정지을 수 있다. 이러한 외부분수들의 조건에 k라 helicon plasma는 여러 종류의 mode로 존재한다. Degeling은 이러한 mode의 변화를 capacitive mode, inductive mode, 그리고 helicon mode(wave mode)의 세가지 부분으로 구분하였다. Helicon plasma가 갖는 높은 이온화율은 여러 가지 응용으로의 가능성을 가지고 있다. 그 예로 plasma processing, plasma wave에 의한 입자 가속, 그리고 가스 레이저 활성 매질 발생 등이 있다. 특히 plasma processing의 경우 helicon plasma는 높은 밀도, 비교적 낮은 자기장, remote operation 등이 가능하다는 점에서 현재 연구가 활발히 진행되고 있다. 상업용으로도 PMT와 Lucas Signatone Corp.에 서 helicon source가 제작되었다. 또한 높은 해리율을 이용하여 저유전 물질인 SiOF의 증착에서 적용되고 있다. 이 외에도 다수의 연구결과들이 발표되었다.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.11-18
• /
• 2008

In recent, lots of researches for mechanical-empirical design concept for asphalt pavement are on going. AASHTO 2002 Design Guide in USA and KPRP(Korean Pavement Research Program) in Korea are under developing. In these programs, the mechanical properties of hot mix asphalt are a key role for design and analysis. Unfortunately, there is no proper database on the mechanical properties of hot mix asphalt, such as dynamic modulus. The use of dynamic modulus has couple of good advantages which is based on temperature, traffic loading and frequency on pavement. In this research, the verification of the relationship between maximum nominal aggregate size and dynamic modulus has been carried out. Also, test specimen size effect on dynamic modulus has been conducted. Considering the limitation of laboratory testing machine in Korea, test specimen with 100mm diameter and 150mm height is recommended for dynamic modulus test. Also, as the maximum nominal aggregate size increases, the dynamic modulus of hot mix asphalt increases.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.929-935
• /
• 1995

In order to develop COG (Chip On Glass) technology for LCD module interconnecting the driver IC to Al pad electrode on the glass substrate, Anisotropic Conductive Adhesive(ACA) process, the most promising one among COG technologies, was investigated. ACA process was carried out by two steps, dispensing of ACA resin in the bonding area and curing by W radiation. Load on the chip was ranged from 2.0 to 15kg and the chip was heated at about 12$0^{\circ}C$. In resin, the density of conductive particles coated with Au or Ni at the surface were 500, 1000, 2000 and 4000 particles/$\textrm{mm}^2$, and the diameter of particles were 5, 7 and 12${\mu}{\textrm}{m}$. As a result of the experiments, ACA process using ACA particle of diameter and density of 5${\mu}{\textrm}{m}$ and 4000 particles/$\textrm{mm}^2$ respectively shows optimum characteristic with the stabilzed bonding properties and contact resistance.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.108-117
• /
• 2001

A sensor array with 10 discrete sensors integrated on a substrate w3s developed for discriminating the kinds and quantities of inflammable gases, like butane, propane, methane, LPG, carbon monoxide. The sensor array consisted of 10 metal oxide semiconductor gas sensors using the nano-sized $SnO_2$ as base material and had differentiated sensitivity patterns to specific gas. The sensor array was designed with uniform thermal distribution and had also high sensitivity and good reproductivity to low gas concentration through nano-sized sensing materials with different additives. By using the sensing patterns of the sensor array at $400^{\circ}C$, we could reliably discriminate the kinds and quantities of the tested inflammable gases under the lower explosion limit through the principal component analysis(PCA).

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2000

Every object emits some energy from its surface. The emission energy forms surface heat distribution which we can capture by using an infrared thermal imager. The infrared thermal image may include valuable information regarding to the subsurface anomaly of the object. Since a thermal image reflects surface clutter and subsurface anomaly, we have difficulty in extracting the information on the subsurface anomaly only with thermal images taken under a wavelength. Thus, we use visible wavelength images of the object surface to remove exterior clutter. We, therefore in this paper, visualize the infrared image for overlaying it with a visible wavelength image. First, we make an interpolated image from two ordinary images taken from both sides of an infrared sensor. Next, we overlay the intermediate image with an infrared image taken from the infrared camera. The technique suggested in this paper can be utilized for analyzing the infrared images on non-destructive inspection against disaster and for safety.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.886-892
• /
• 1997

There are many methods to synthesize polystyrene latex. Emulsion polymerization technique is commonly used commercially, but it requires a new technology to replace a traditional polymerization method because of the disadvantage of chemical initiator for environmental pollution. Since free radicals can be produced by ultrasound energy effect, polystyrene latex was synthesized using ultrasound energy instead of chemical initiator. As the ultrasonic irradiation time was increased, average molecular weight was increased and polydispersity was decreased. The degree of polymerization was increased with the concentration of SDS and maximum degree of polymerization was shown at 2wt.% SDS concentration and the reaction temperature of $40^{\circ}C$. During the course of polymerization, molecular weight was repeatedly fluctuated because of occurrence of depolymerization. Narrow molecular weight distribution polystyrene latex having controlled molecular weight was synthesized by controlling ultrasonic irradiation time and the concentration of SDS.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.151-154
• /
• 2011

$NO_x$ 제어 기술로는 크게 연소 전 탈질, 연소 개선 및 연소 후 탈질 기술로 구분할 수 있으며, 연소 후 탈질 기술에 속하는 SCR은 촉매를 사용하여 $NO_x$를 환원하는 대표적인 배연탈질기술이다. SCR의 $NO_x$ 저감 성능은 촉매 요인(촉매 구성물질, 형태, 공간속도 등)과 배가스의 온도, 유속 분포, 공정 운전 조건 등의 다양한 인자에 의해 좌우되는데 특히, 촉매층으로 유입되는 유동의 균일도는 가장 중요한 요소가 된다. 유동이 균일하지 않을 경우 촉매 전단에 편류가 발생하게 될 것이며 일정 촉매만 사용하게 되어 촉매 사용주기 감소 및 SCR 성능 저하를 초래할 수 있기 때문이다. 본 연구에서는 3차원 수치 해석 기법을 이용하여 설계 초기의 SCR 반응기 내 유동 특성을 모사하여 기류 균일도 여부를 확인하고, SCR 내 유동 균일도를 최적화시키기 위한 설계를 목적으로 설치하는 가이드 베인과 배플, 다공판이 반응기 내부 유동 및 촉매층의 기류 균일도에 미치는 영향에 대하여 연구를 수행하였다. 그 결과, 유동 개선을 위해 인입 덕트 곡관부에 가이드 베인을 설치하여 처리가스를 적절하게 배분시키고, 반응기 상단에 3단 배플을 설치한 결과 반응기 내부 유동의 편류 개선에 매우 효과적임을 알 수 있었다. 또한 다공판을 예비 촉매층 하단부 위치에 추가로 설치함에 따라 유동을 한번 더 완충시킬 수 있어 기류 균일도가 매우 양호해짐을 알 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.183-190
• /
• 2002

Photoluminescence(PL) properties of $Si^+$-implanted $SiO_2$ film, which was thermally grown on c-Si substrate, is reported. We have compared room temperature photoluminescence (PL) spectra of the samples which was made in several kinds of implantation, subsequent annealing and $SiO_2$ film thickness. XRD data was correlated with the PL spectra. Silicon nanocrystals in $SiO_2$ film is considered as the origin of the photoluminescence. PL spectra was investigated after wet etching of the $SiO_2$ film by using BOE (Buffered Oxide Etchant) at every one minute. PL peak wavelength was varied as the etching is proceeded. These results indicate that the quantity and the distribution of dominant size of Si nanocrystals in $SiO_2$ film seem to have a direct effect on PL spectrum.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.414-421
• /
• 1995

In order to establish informations important to the measurement of lipoxygenase (LOX) activity, providing conditions most favorable for its action and determining factors that inhibit activity, the influence of extraction buffer, substrate, pH, storage, temperature, NaCl, $CaCl_2$, other cations and antioxidants on LOX activity, and localization of LOX in cucumber tissues were carried out. The most favored substrate for LOX was linolenic acid followed by linoleic and arachidonic acids. LOX activity in both peel and mesocarp tissue extracts was maximum at pH 5.5 and relatively stable at $40^{\circ}C\;and\;50^{\circ}C$ temperature. The condition of 0.2 M NaCl with pH 5.0 was observed to provide optimum LOX stability. The enzyme activity was reduced by addition of cations, $Mn^{2+},\;Cu^{2+}\;or\; Al^{3+}$, except $Ca^{2+}$ which stimulated activity of LOX. Butylated hydroxy anisole (BHA) and propyl gallate decreased LOX activity with increasing concentration. Cucumber peel had higher activity than other tissues, locule or mesocarp, of cucumber.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.43-47
• /
• 2008

[ $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ ] nano-glass has been prepared by sol-gel method. The mean particle size was 60.3 nm with narrow size distribution. The nano-galss has been used as a sintering aid for the densification of the NiZnCu ferrites. The ferrite was sintered with nano-glass sintering aids at $840{\sim}900^{\circ}C$, 2 h and the initial permeability, quality factor, density, and saturation magnetization were also measured. The initial permeability of 0.5 wt% nano-glass added toroidal sample for NiZnCu ferrites sintered at $900^{\circ}C$ was 193.3 at 1 MHz. The initial permeability and saturation magnetization were increased with increasing annealing temperature. As a result, $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ nano-glass systems were found to be useful as sintering aids for multilayer chip inductors.