• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2004

To construct the non-contact temperature detection systems, LC resonance type sensors composed of temperature sensitive ferrite inductors and capacitors were used, and their wireless temperature detection performances were investigated. The temperature was wirelessly detectable using the fabricated LC resonance sensors with a transmitter and receiver, because their inductances and resonance frequencies were changed according to the temperature dependance of permeability of the ferrites. The sensitivity of the system was decreased with the distance i between transmitter and receiver as a ratio of the l$^6$.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.43-48
• /
• 2006

A phthalocyanine reactive dye was applied to nylon fibers to study the effects of the temperature and pH on % exhaustion and fixation. In addition, appropriate predictable empirical models, relatively new approaches in dyeing process, were developed incorporating interactions effects of temperature and pH for predicting the both % exhaustion and fixation. The significance of the mathematical model developed was ascertained using Excel regression (solver) analysis module. A very high correlation coefficient was obtained ($R^2=0.9895$ for % exhaustion, $R^2=0.9932$ for fixation) for the model which shows prominent prediction capacity of the model for the unknown conditions. The predictable polynomial equations developed from the Experimental results were thoroughly analyzed by ANOVA (Analysis of Variance) statistical concepts.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1352-1363
• /
• 2015

This study was carried out to investigate the characteristics of the dependent variables depending on the condition changes of independent variable of the operation and the material during the production of collets added with rice and dried shrimp by using single extruder to utilize as basic data for the manufacture of extrusion collets. A total of 7 independent variables were set up as a raw, 20, 40 and 60 mesh for the powder particle size of rice; 12, 14, 16 and 18% for the moisture content of rice; 2, 4, 6 and 8% for the addition amount of dried shrimp; 90, 95, 100 and $110^{\circ}C$ for the barrel temperature; 210, 280 and 340 rpm for the screw speed; 4, 6, 8 and 10 mm for the discharge port diameter; 30, 40, 50 and 60 kg/h for the input amount of the mixed material. The characteristics of the dependent variables including puffing ratio, moisture content, lightness, uniformity, productivity of collets was to be studied by changing the conditions of the independent variables. As a results of this study, 20 mesh of powder particle size of rice, 14% of moisture content of rice, 4% of addition amount of dried shrimp, $100^{\circ}C$ of barrel temperature, 280 rpm of screw speed, 6 mm of discharge port diameter and 50 kg/h of input amount of mixed material were found to be the most preferable over other independent variables for the production of extrusion collets. In conclusion, it is necessary to set the independent variable in order to produce the high quality collets added with the rice as the main raw material and dried shrimp as the sub-materials.

• Korean Journal of Poultry Science
• /
• v.11 no.2
• /
• pp.127-132
• /
• 1984

In order to investigate the effect of temperature variation in winter season on the egg production and energy utilization of poultry, 30week-old Warren layers were reared during 17 weeks of experimental period, from Nov. 1st, 1980 to Feb. 27th. 1981. The effect of temperature change on the body weight, feed intake and feed conversion was not found. But the outdoor average and the indoor minimum temperature had changed Positively 0.46 and 0.24% of henday egg production per 1$^{\circ}C$ fluctuation, respectively. Daily metabolizable energy utilized during 32 (Nov.15th), 34(Dec.1st) and 46(Feb. 27th) week-old reached to, respectively, 358, 385 and 419 kcal per bird, and 159, 173 and 176 kcal per kg body weight. Also the metabolizable energy utilization correlated negatively with the ambient temperature fluctuation, while the equation by NRC(1981) for metabolizable energy requirement estimation were well in accord with these results when the indoor minimum temperatures were based. And the metabolizable energy requirements per kg body weight were 1.7, 1.6 and 2.1 kcal, respectively, according as 1C fluctuation of outdoor, indoor maximum and indoor maximum and indoor minimum temperatures. Thus it is appeared that indoor temperatures fluctuated by outdoor temperatures will affect the egg Production and metabolizable energy utilization of hen in winter season of Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1001-1009
• /
• 2000

This study is to find the utilization of intermittent aeration system, around S-COD, T-COD, SS, timewise changes of treatment performance, sludge conversion yield, changes of temperature and pH, etc. In consequence of this study, factors of temperature correction showed 1.052 on continuous aeration, and 1.056 on intermittent aeration which is more sensitive to temperature through a minute degree. Meanwhile, sludge conversion yield on intermittent aeration showed lower and more economical than that on continuous aeration. In case of changing pH, treatment water of both reactors worsened slightly in acid but improved in alkali. In general. considering the quality of effluent water, variation pH of effluent water, etc. the case of intermittent aeration was more favorable than that of continuous aeration.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.1-6
• /
• 2006

In this study we proposed on effect of the photodecomcomposition of coated nanofiber by $Pd/TiO_2$ for the removal of formaldehyde gas as indoor air pollutant. The photocatalytic reactor was setup in the inside of rectangular box (volume 2 l), UV lamp and the coating nanofiber with $Pd/TiO_2$. This study investigated the reaction rate and the adsorption constant of Langmuir-Heinshelwood, conversion of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$), effect of conversion (%) under different concentration, and effect of conversion (%) with humidity level on added $SO_2$ gas. As results, the rate constant (k) and adsorption constant (ft) were 114.94ppmv/min, $0.0036ppmv^{-1}$, respectively. and the conversion (%) of formaldehyde gas on temperature ($40^{\circ}C{\sim}80^{\circ}C$) was decreased to about 24%, compare with the first conversion (%). In conversion effect of increasing humidity levels, the presence of sulfur dioxide further decreased than without sulfur dioxide. the decreasing reason of conversion with presence sulfur dioxide judged as a cause of interference factor on the decrease of contact chance with photocatalysts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.41-41
• /
• 1999

핵융합 장치의 플라즈마 운행동안 토카막 내벽에 도달하는 온도는 최저 $600^{\circ}C$ 이상이다. 또한 플라즈마 자체와 사용자(User)들의 시료로부터 방출되는 입자들에 의한 내벽 충격(damage)은 장기간의 안정적인 운행 및 연구에 심각한 영향을 미친다. 이러한 이유로 토카막 제작시 내벽 보호재의 선정은 매우 높은 비중을 차지한다. Graphite는 높은 융점과 가공의 용이성으로 토카막 내벽의 보호재로 선호되는 물질이다. 그러나 토카막 용기(vessel)에 사용되는 스테인레스 스틸(AISI 316LN)보다 약 50배 이상의 기체 방출율(outgassing rate)을 가진다. 그러므로 장착 이전의 초기 청정화 과정이 매우 중요하며, 특히 400m2의 약 2톤(2000kg)의 graphite가 사용되므로 대량 처리를 할 수 있는 방법의 선정도 함께 개발되어야 한다. 본 연구팀에서는 처음 10개 회사의 시제품을 검토한 후, 최종 2개 회사의 4가지 종류의 시료를 선정하였다. 선정된 시료는 Union Carbide의 ATJ와 Toyo Tanso의 IG-110, IG-43, Ig-430이다. 시료는 비절삭유(oil-free) 가공에 의해 80$\times$2$\times$3 (mm)의 크기로 제작되었고 에탄올과 메탄올 용액에서 초음파 세척되었다. 건조된 시료는 TDS(Thermal Desorption Spectroscopy) 장치에 장착되어 세 단계의 실험을 하였다. 처음은 승온(상온 ~100$0^{\circ}C$)에 의한 방출 기체의 성분 분석, 두 번째는 장기간 (2주) 대기 노출 후 주요 방출 기체의 온도에 따른 변화, 마지막으로는 특정 기체에서의 장기간 보관후, 주요 방출 기체의 온도에 따른 변화를 조사하였다. 다음 그림 1은 본 연구에서 사용된 TDS 장치의 개략도이고 그림 2는 TDS 장치에 장착 직 후와 대기 중 노출된 시료들의 온도증가에 따른 총 압력의 변화이다.

• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.937-942
• /
• 1996

박막 공정 및 마이크로머시닝(micromachining)기술에 의해 제작되는 마이크로 가스 센서는 고온 동작이 필수불가결하며 이 때 안정된 출력을 얻기 위해서 센서 저항 변화에 영향을 줄 수 있는 응집화 현상이 발생하지 말아야 한다. 본 연구에서는 고온 동작시 응집화의 구동력으로 작용하는 여러 요소중의 하나인 응력(stress)을 줄이기 위해서 인가 전력 밀도, 기판온도, 증착 압력 등을 증착 변수로 하여 증착 조건이 (AI, SI)1-xOx박막과 Pt 박막의 제반 물성 및 응력변화에 미치는 영향에 대하여 연구하였다. (AI, SI)1-xOx박막의 증착 속도와 굴절율 값은 O2분압과 기판 온도가 증가할수록 감소하였으며 응력은 O2분압이 증가함에 따라 인장에서 압축으로 전환된 후 증가하였다. Pt 박막의 경우, 인가 전력이 증가할수록 공정 압력이 감소할수록, 기판 온도가 감소할수록 증착 속도는 증가하였으며 전기 비저항은 감소하였다. Pt 박막의 응력은 인가 전력이 증가할수록, 공정 압력이 증가할수록, 기판 온도가 증가할수록 압축에서 인장의 방향으로 전환된 후 증가하였으며 박막의 전기비저항 및 증착속도에 크게 의존하는 것으로 분석되었다.

• Resources Recycling
• /
• v.12 no.4
• /
• pp.44-50
• /
• 2003

Separation of mixed plastics is not a simple task due to similarities of specific gravity and limitations of sizes, etc. In this study, a new technique was developed to separate plastics selectively by a thermal adhesion method using the different softening or melting temperatures of various types of plastics. Tests were conducted to investigate softening or melting temperatures and adhesion probabilities of plastics with change in temperature. Tests also were conducted to analyze the operating variables, including contact times, size and color pigment. It was founded that LDPE, HDPE and PVC, PET, etc among mixed plastics could be separated selectively according to the change of temperature.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.163-174
• /
• 2009

Mechanical device using the load cell or strain gage sensor can be influenced by tempearute changes because temperature change can cause a shift in the load cell or straing gage output at zero loading. In this paper, micro cone penetrometers with 1~7mm in diameter, are developed by using an optical fiber sensor (FBG: Fiber Bragg Grating) to compensate the continous temperature change during cone penetration test. Note the temperature compensated method using optical fiber sensor which has hair-size in diameter, and is not affected by environmental conditions because the measured data is the wavelength shifting of the light instead of the intensity of the electric voltage. Temperature effect test shows that the output voltage of strain gage changes and increases with an increase in the temperature. A developed FBG cone penetrometer, however, achieves excellent temperature compensation during penetration, and produces continuous change of underground temperature. In addition, the temperature compensated FBG cone shows the excellent sensitivity and detects the interface of the layered soils with higher resolution. This study demonstrates that the fiber optic sensor renders the possibility of the ultra small size cone and the new fiber optic cone may produce more reliable temperature compensated tip resistance.