• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.35-46
• /
• 1998

The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.103-110
• /
• 2010

This study was conducted to determine the effect of supplemental medicinal plants (Artemisia, Acanthopanx and Garlic) on productive parameters in pigs. In experiment 1, a total of 90 multiparous sows were used in a 21-d performance study. The diets included: 1) CON (basal diet; Control), 2) BM1 (CON + 0.1% medicinal plants) and 3) BM2 (CON + 0.2% medicinal plants). Backfat thickness from farrowing to weaning was higher (P<0.05) in CON compared with sows fed treatments diets. The piglets weight gain was higher in the medicinal plants treatments (P<0.05). ADFI, nutrient digestibility and survivability were not affected by the experimental treatments. In experiment 2, a total of 60 finishing pigs (Landrace ${\times}$ Yorkshire ${\times}$ Duroc, $65.21\;{\pm}\;0.04\;kg$ average initial body weight) were used in a 56-d performance assay to determine the effects of supplemental medicinal plants (Artemisia, Acanthopanx and Garlic) on growth performance and carcass characteristics in finishing pigs. The dietary treatments included: 1) CON (basal diet ; Control), 2) BM1 (CON + 0.1% medicinal plants) and 3) BM2 (CON + 0.2% medicinal plants). For 4~8 weeks and overall period, ADG was higher (P<0.05) in the pigs fed medicinal plants. CON treatment was higher 24 pH loin and cooking loss than BM1 treatment (P<0.05). Water holding capacity and drip loss after 1day were affected by the dietary treatments (P<0.05). No numerical differences were observed in sensory evaluation, meat color, TBARS and loin area among three treatments. In conclusion, the results obtained from this feeding trial suggest that the medicinal plants mixture supplementation in diets for finishing pigs can improve ADG, water holding capacity, cooking loss and it improved backfat loss in sow and, litter weight gain.

• Development and Reproduction
• /
• v.2 no.2
• /
• pp.213-221
• /
• 1998

Intracytoplasmic sperm injection (ICSI) has been widely used to treat couples with infertility due to severely impaired sperm charateristics and for whom conventional in-vitro fertilization (IVF) had failed. The extent to which the morphology of the oocyte at the light microscopy level is related to the results of ICSI vis controversial. In this study, oocytes from 44 patients were reviewed. The ICSI procedure was recorded through CCD camera. The oocytes were divided into five groups according to the presence of cytoplasmic inclusions, the width of perivitelline space (PVS), the presence of cell debris in PVS, the status of first polar body and the flexibility of oolemma. The results showed that the fertilization rate and embryonic development were not associated with the morphological criteria of oocyte. The degeneraton rate of oocytes after ICSI was significantly higher (P<0.001) in the oocytes whose membranes were broken at the moment of insertion (17.7%) than the oocytes whose membranes were broken by aspiration of cytoplasm (1.6%). More oocytes with cytoplasmic inclusions (48.4% vs. 25.1%, p<0.001), wide PVS (35.2% vs. 19.0%, p<0.001), or cell debris in PVS (53.3% vs. 38.4%, p<0.05) were observed in patients with female factor infertility compared to patients with male factor infertility. These results .suggest that the fertilization rate and embryonic development after ICSI are not correlated with oocyte morphology based on the presence of cytoplasmic inclusions, size of PVS, the presence of cell debris in PVS and the status of polar body. And the degeneration rate of oocytes after ICSI was associated with the flexibility of oolemma.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.755-762
• /
• 2000

Physicochemical properties of commercial sweet potato starches manufactured by 7 different companies were investigated in comparison with corn and potato starches. Crude ash and protein content varied from 0.36 to 1.02%, and from 0.04 to 0.14% based on dry weight, respectively. The protein contents were relatively smaller than that of corn or potato starch. But whiteness of the sweet potato starches was less than that of corn or potato starch. Mean diameter of the sweet potato starch granules varied from 14.23 to $21.08\;{\mu}m$ depending on the company and all sweet potato starches showed bimodal size distributions. Pasting viscosity measured by Rapid Viscoanalyzer(RVA) also showed variations among the starches of different companies. The starch from D company in Korea had the lowest pasting temperature$(74.00^{\circ}C)$ whereas the starch from a phillippine company(P) did the highest one$(80.35^{\circ}C)$. The peak viscosity of sweet potato starches was higher than that of corn starch but lower than that of potato starch. The D company starch also showed the highest peak viscosity(2283 cp) among the starches tested. Paste breakdown by hot shearing ranged from 524 cp (S company) to 1279 cp (HL company). Textural properties of the starch gels appeared significantly different among the starches of different manufacturers. The greatest hardness of the gel was $137.90\;g_{f}$ at 1 day storage whereas the lowest value was $31.53\;g_{f}$. Except the starches from 2 companies (P and S), the sweet potato starches formed very soft and weak gels. P or S company starches formed the gels similar to potato starch. Syneresis by freeze-thawing treatments appeared less for sweet potato starch gels than that for corn starch gels, but greater than that for potato starch gel. The overall properties of the sweet potato starches varied by the manufacturing companies, and ranged between those of corn and potato starches.

• The Korean Journal of Mycology
• /
• v.12 no.3
• /
• pp.105-110
• /
• 1984

Seven seed samples of corn obtained from Kangweon Provincial Office of Rural Development, Kerea were tested for seed-borne fungi, and found that all the samples tested were infected with Fusarium moniliforme to an extent of $6.0{\sim}79.5%$. Severely infected seed samples showed poor germination on blotter. Seed component plating showed that the fungus present not only in tip caps, pericarps and endosperms, but also in embryos. Heavy infection of the fungus caused severe seed rot and seedling blight in soil, but the damage was not severe and many plants grew without any symptoms when the seeds with light infection were sown in soil. However the fungus was frequently detected from inside of the stems of healthy looking seedlings. The results indicate that the fungus transmit from seed to plant systemically. In inoculation experiments, the fungus produced stem rots on corn plants of 110 days old. The cultivar of Hwangok 3 was revealed more susceptible to the fungus than that of Suweon 19.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.17-28
• /
• 2018

In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon In this study, catalytic activation using sulfuric acid lignin (SAL), the condensed solid by-product from saccharification process, with potassium hydroxide at $750^{\circ}C$ for 1 h in order to investigate its potential to nanoporous carbon material. Comparison study was also conducted by production of activated carbon from coconut shell (CCNS), Pinus, and Avicel, and each activated carbon was characterized by chemical composition, Raman spectroscopy, SEM analysis, and BET analysis. The amount of solid residue after thermogravimetric analysis of biomass samples at the final temperature of $750^{\circ}C$ was SAL > CCNS > Pinus > Avicel, which was the same as the order of activated carbon yields after catalytic activation. Specifically, SAL-derived activated carbon showed the highest value of carbon content (91.0%) and $I_d/I_g$ peak ratio (4.2), indicating that amorphous large aromatic structure layer was formed with high carbon fixation. In addition, the largest changes was observed in SAL with the maximum BET specific surface area and pore volume of $2341m^2/g$ and $1.270cm^3/g$, respectively. Furthermore, the adsorption test for three kinds of organic pollutants (phenol, 2,4-Dichlorophenoxyacetic acid, and carbofuran) were conducted, and an excellent adsorption capacity more than 90 mg/g for all activated carbon was determined using 100 ppm of the standard solution. Therefore, SAL, a condensed structure, can be used not only as a nanoporous carbon material with high specific surface area but also as a biosorbent applied to a carbon filter for remediation of organic pollutants in future.

• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.11-31
• /
• 1980

The morphological, anatomical and physiological traits were eximined for Populus alba ${\times}$ glandulosa which is an important planting species in Korea. The results obtained are as follows: 1. External characters in the leaf shape and chaff shape in the catkin were inherited as incomplete dominance but nectar gland was inherited as dominance. 2. Among the 15 selected clones, 9 clones were male, 2 clones female and 2 clones monoecious. 3. There were well-developed cork layers and bast fiber bundles in the bark. 4. Primordial leaves composed of 3 layers of cells and those undifferentiated into palisade and spongy parenchymas differed in its origin. 5. Leaf scare consisted of two kinds of tissues; one is connected to vascular bundle and the other not to vascular bundle. Tissues which had been connected to vascular bundle were isolated with only 2 or 3 layers of cork cells from the outside. 6. There was complicated arrangement in the vascular bundle of petioles. 7. Growth of the hybrid was sensitively influenced by external temperature, day-length and amount of light. In particular, it was apparent in height growth. 8. Flatness, loam soils and a $60{\times}60cm$ spacing might be best factors for the growth of P. alba ${\times}$ glandulosa. 9. The rooting of 15 clones was dependant upon external factors. 10. The growth of P. alba ${\times}$ glandulosa was best at around 80% of soil moisture content on the basis of plot water capacity. 11. Temperature difference between inside and outside stems below 100cm during the winter was the greatest at the south among seasons and among directions. 12. The sap movement was markedly influenced by air temperature, relative humidity in forest stand and moisture content in stem. 13. Total sugars in the cortex changed with season but did not differ in the dircetion of the stem. 14. Isoperoxidase variations in the leaf were different among 15 clones. Thus, it may be useful as a criterium for clonal identification. 15. The rate of soil moisture content decreased at a rapid slope was faster than that at a slow slope. Poor growth of P. alba ${\times}$ glandulosa at the slope was probably due to depletion of soil moisture.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.1
• /
• pp.13-21
• /
• 1980

This experiment was carried out to investigate the effect of heating periods on the physical and mechanical properties of maple (Acer mono Max.) by oven heating and heating in water at 100$^{\circ}C$ for 0, 2, 4, and 6 days respectively. The results obtained are summarized as follows: 1. The green volume specific gravity due to oven heating decreased from 6 days of exposure, and that, due to heating in water decreased from 4 days of exposure. 2. The radial shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 6 days of exposure. The tangential shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 2 days of exposure. 3. The amount of water absorption due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 4 days of exposure. 4. The compressive strength pararelled to grain due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 2 days of exposure. 5. The shearing strength pararelled to grain due to oven heating increased till 2 days of exposure, but decreased from 4 days of exposure, and that due to heating in water decreased from 4 days of exposure. 6. The bending strength due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 6 days of exposure. The impact bending absorbed energy due to oven heating decreased from 4 days of exposure, and that due to hearing in water decreased from 2 days of exposure.

• Journal of Chest Surgery
• /
• v.39 no.7 s.264
• /
• pp.527-533
• /
• 2006

Background: A retrospective study was conducted to analyze the results of St. Jude Medical mitral valve replacement at the Chonbuk National University Hospital since the initial implant in May 1984. Material and Method: Between May of 1984 and December of 1996, 95 patients underwent MVR with the St. Jude Medical mechanical valve prosthesis at Department of Medical Science of Chonbuk National University Hospital and follow-up ended in May of 2004. Result: Age ranged from 19 to 69 years. Follow-up (mean${\pm}$standard deviation) averaged $10.6{\pm}4.2\;year$. Thirty-day operative mortality was 4.2% (4/95). Nine late deaths have occurred and actuarial survival was $90.5{\pm}3.0%,\;87.9{\pm}3.4%\;and\;83.2{\pm}4.6%$ at 5, 10 and 20 years, respectively. Probability of freedom from valve-rotated death was $95.5{\pm}2.1%,\;94.3{\pm}2.4%\;and\;91.0{\pm}3.9%$ at 5, 10 and 20 years, respectively. Seven patients have sustained thromboembolic events (1,05%/patient-year). Fifteen patients had anticoagulation related hemorrhage (3.56%/patient-year). There was no structural valve deterioration. Probability of freedom from all complications was $82.0{\pm}3.9%,\;71.3{\pm}4.8%\;and\;42.4{\pm}10.5%$ at 5, 10 and 20 years, respectively. Conclusion: We confirm the effective and excellent durability of the St. Jude Medical prosthesis in the mitral position with a low event rate at long-term follow-up. It also demonstrates the commonly encountered practical difficulty of adjusting the anti-coagulation protocol in patients with prosthetic mitral valves.

• Korean Journal of Environmental Agriculture
• /
• v.3 no.2
• /
• pp.43-49
• /
• 1984

The acute toxicity of an insecticide cartap to several species of freshwater animals was evaluated in the laboratory with special reference to the species specificity, effects of water temperatures and pH values. The aquatic animals tested were the Carassius auratus L., Aphyocypris chinensis $G{\"{U}}NTHER$, Misgurus anguillicaudatus CANTOR, Moina macrocopa STRAUS. The susceptibility of aquatic animals to cartap was different with the species of animals. At the water temperature of $25^{\circ}C$ and pH 7, TLm values of the insecticide to the C. auratus L., A. chinensis G. and M. anguillicaudatus were 0.88, 0.26 and 0.13 ppm in 48 hours, respectively, and to Moina macrocopa S., 306 ppm in 3 hrs. In the case of the three species of fish, TLm 48 values were significantly decreased with rise in temperature. In the case of water flea, where TLm value was 107 ppm at $20^{\circ}C$, there was no consistent response to temperature change, with the highest figure at $25^{\circ}C$ than at either 20 or $30^{\circ}C$. and the susceptibility of C.auratus L. and A. chinensis G. greatly decreased with the increase of pH in water. The toxicity to M. anguillicaudatus and M. macrocopa was significantly higher at pH 9 than at pH 6 or 7. In conclusion, the toxicological reactions of the freshwater animals to cartap were variably influenced by the water temperatures and pH values of water and species of animals.