• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.239-246
• /
• 2012

This study was performed to investigate the removal characteristics and mechanism of heavy metals using pellet-type ceramics(ZS ceramics), in which natural zeolite was mixed and calcined with converter slag. The optimal calcination temperature range was measured to be $600{\sim}800^{\circ}C$. The calcination time had little effect on the removal of heavy metal in acid wastewater. The adequate dose of ceramics was shown to be 2~5% for removal of heavy metals in acid wastewater. The maximum removal capacity of ZS ceramics for heavy metals were observed to be Al 84.7 mg/g, Cd 37.3 mg/g, Cr 81.7 mg/g, Cu 55.6 mg/g, Fe 57.2 mg/g, Mn 32.1 mg/g, Ni 38.0 mg/g, Pb 71.6 mg/g, Zn 46.3 mg/g. The pH played a pivotal role in the removal of heavy metals by ZS ceramics. The analysis results of mechanism exhibited that the ZS ceramics could act as a multi-functional ceramics for removal of heavy metals in acid wastewater by adsorption, ion-exchange, or precipitation.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.83-90
• /
• 2020

Plate heat exchangers(PHE) have been commercialized since the 1920s. Since then, although the basic concept of PHEs has changed little, its design and construction have progressed significantly to accommodate higher temperatures, higher pressures, and large heat exchanging capacities. The development trend of PHEs is consistent with heat plate developments with better thermal efficiency, lower pressure drop, and good flow distribution. The purpose of this paper is to introduce the main development processes of a plate cooler for medium-speed engine lubricant oil cooling in vessels which is in line with the development trend of PHEs and to provide its thermal performance data that were found out during experimental tests. The plate cooler in this study cannot measure the wall temperatures directly due to its structural characteristics, so the heat transfer coefficients were calculated using the modified Wilson Plot method. The water-to-water tests were first conducted experimentally to figure out the characteristics of heat transfer coefficients and pressure drops on the water side and then the water-to-oil tests followed to obtain the heat transfer coefficients on the oil side. The test results showed that heat transfer coefficients and pressure drops on both water and oil side increased with flow rates, and it was also found that all the development targets of the plate cooler in this study were achieved successfully.

• The Magazine of the IEIE
• /
• v.11 no.5
• /
• pp.42-50
• /
• 1984

국내의 다음세대 컴퓨터 개발을 위한 VLSI 설계와 CAD 분야에 대한 연구 방향을 제시한다. 연구의 목표는 국제적으로 경쟁할 수 있는 VLSI 설계능력과 백만개 정도의 트랜지스터로 자성된 회로를 경제적으로 설계하기 위한 CAD 기술과 System의 확립이다. ·새로운 회로 구조와 알고리즘에 대한 연구 · CAD 도구와 언어의 개발에 관한 첨단 CAD 기술개발연구 · VLSI 설계에 필요한 CAD 도구 이용과 개발에 필요한 표준 인터페이스, 네트워킹, 컴퓨팅 하드웨어. 시스템 소프트웨어에 대한 연구등의 부분으로 크게 나눌 수 있다. 이용 가능한 CAD system을 평가하고 개선하며 첨단 CAD에 대한 소프트웨어와 하드웨어에 대해 · 컴퓨팅 하드웨어 · 프로그램 분위기 · 네트워킹 능력 ·자료 교환을 위한 표준인터페이스 등에 관해 조사분석도 병행한다. CAD에 관한 세부적인 연구 과제는 · 시스템 사양언어 · 설계 검증 ·시스템시뮬레이션· 설계 합성 · 설계 해석· 설계 방법론·디바이스와 공정 모델링 프로그램 등이다. 고속 계산용 VLSI에 관한 구조와 알고리즘은 행렬 계산을 위한 ·분산 배열 처리 회로 ·시스토릭 (Systolic) 배열 회로 ·셀률라(Cellular) 논리 회로 · 3차원 배열 회로 와 · 비규칙적 계산 알고리즘을 갖는 VLSI가 있다. VLSI설계훈련과 CAD 기술 축적을 위해 CAD enter를 설립하여 전국적인 CAD 네트워킹을 관계 연구소와 여러 대학에 가설하며, MPC 계획을 추진한다. VLSI설계 가능성이 입증되면 VLSI 설계능력을 더욱 향상 시키기 위해 0.5∼1.0mm기술의 silicon faundary를 설립한다. 연구 개발 조직은 대학, 산업체. 연구소가 삼위일체가 되어 수행될 수 있도록 연구 개발 위원회를 설치 운영하며 경쟁적이며 경제적으로 연구 업무를 집행하는 것이 바람직하다.았다.형질에 관여하는 귀전자에 미치는 기구에 대하여 검토할 여타가 있다고 보여진다. 분해능의 특징으로 미루어 앞으로는 레이저를 이용한 계측 방법이 그 주류를 이룰 것으로 사료된다. 우선 본 해설은 기체의 온도 및 농도의 광학적 측정방법중 Raman산란광 검출법에 대하여 실제로 측정하는 입장에서 간단히 소개한다.lity)이, 높은 $GA_3$함량에 기인된다'는 주장은 본실험(本實驗)으로 부인(否認)되었다. 따라서, 응용학적(應用學的) 측면에서 고려해 볼 때, 리베스식물(植物)의 육종기간 단축을 위한 모든 화아분화(花芽分化) 촉진 조치는 P.J.-식물(植物)이 20. node이상 생육하였을 때 취하는 것이 효율적인 것으로 결론 지어진다.앞당겨진 7月 셋째 週였다. 8. Culex (Culex) tritaeniorhynchus summoro년의 最大發生 peak는 1981年, 1982年 모두 8月 둘째 週였다. 9. Anopheles (Anopheles) sinensis의 最大發生 peak는 1981年에 7月 다섯째 週, 1982年은 2週 앞당겨진 7月 셋째 週였다. 10. 重要 3種의 最大 peak를 比城하면 Culex (Culex) pipiens pallens와 Anopheles (Anopheles) sinensis는 1981年과 1982年 모두 最大 peak時期가 同一하였으며, Culex (Culex) tritaeniorhynchus summoro년는 2年間 모두 8月둘째 週에 나타났다.osterior to manubrium and anterior to aortic arch) replacing the normal mediastinal fat. (2) In benign thymoma, the marging of the mass was smooth and the normal fat

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.123-136
• /
• 2010

In order to remediate heavy metal contaminated Nong island, Maehyang-ri shooting range soils through the batch reactor scale washing were evaluated. The experiment texture soil of N3 in the Nong island at north side incline was (g)mS containing 12.9% gravel, 47.0% sand, 35.1% silt and 5.0% clay. And the N3 soil area was contaminated with Cd($22.5\pm1.9$ ppm), Cu($35.5\pm4.0$ ppm), Pb($1,279.0\pm5.1$ ppm) and Zn($403.4\pm9.8$ ppm). The EDTA(ethylene diamine tetra acetic acid, $C_{10}H_{16}N_2O_8$) in the N3 soil was observed as most effective extractants among the 5 extractants(citric acid, EDTA, phosphoric acid, potassium phosphate and oxalic acid) tested. And chemical partitioning of heavy metals after washing N3 soil with EDTA was evaluated. Removal efficiency of residual fractions was higher than that of non-residual fractions. To choose EDTA extractant which is the most effective in soil washing technology using batch reactor process cleaning Pb and Zn contaminated sits; Pb and Zn removal rates were investigated 92.4%, 94.0% removal(1,000 mM, soil:solution=5, $20^{\circ}C$, 24 hour shaking, pH=2, 200 RPM), respectively. The results of the batch test showed that the removal efficiency curve was logarithmic in soil was removal. Thus, EDTA washing process can be applied to remediate the Pb and Zn contaminated soil used in this study.