• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.387-395
• /
• 2006

본고에서는 고유한 원자구조에 기인한 우수한 특성으로 인해 구조재료 및 기능재료로서 그 활용이 기대되고 있는 벌크 아몰퍼스 소재에 있어 온간압출, 온간압연, 방전 플라즈마 소결(Spark Plasma Sintering)등 과냉각액체온도구간에서의 점성유동을 이용한 고화성형 공정의 최근 기술동향에 대해 간략히 소개했다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1301-1306
• /
• 2006

Aluminum alloys are gaining increased acceptance in the automotive and electronic industeries and cold & hot forging is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of A6061(Al-1.2Mg-0.8Si) alloy fabricated by cold & hot forging process for development of the future compressor block. The microstructure of cold & hot forginged specimen were composed of eutectic structure aluminum solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment A6061 alloy revealed 291.7MPa. It was fabricated that a trial future compressor cylinder block using cold & hot forging.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.838-847
• /
• 2004

The effect of a metal mold on densification behavior of stainless steel 316L powder was investigated under warm isostatic pressing with a metal mold. We use lead as a metal mold and obtain experimental data of metal mold properties. To simulate densification behavior of metal powder, elastoplastic constitutive equation proposed by Shima and Oyane was implemented into a finite element program (ABAQUS) under warm die pressing and warm isostatic pressing with a metal mold. Finite element results were compared with experimental data for densification and deformation of metal powder under warm isostatic pressing and warm die pressing.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1352-1357
• /
• 2003

The effect of the metal mold on densification behavior of stainless steel 316L powder was investigated under warm isostatic pressing with metal mold. We use lead as metal mold and obtain experimental data of metal mold property. To simulate densification of metal powder, the elastoplastic constitutive equation proposed by Shima and Oyane was implemented into a finite element program (ABAQUS) under warm die pressing and warm isostatic pressing with metal mold. Finite element results were compared with experimental data for densification and deformation of metal powder under warm isostatic pressing and warm die pressing.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.68-69
• /
• 2011

마그네슘 판재의 온간 스프링백 거동 예측을 위한 재료 거동 모델을 고찰하였다. V-굽힘 시험에 관한 기존 문헌의 결과와 비교하여 재료 모델의 타당성을 토하였다. 스프링백 거동의 정량화를 위해 온간 S-rail 프레스금형에 의한 성형 시험을 수행하였다. 성형 시험은 다양한 온도, 속도, 성형깊이 조건에서 수행하였으며 시험 결과를 서로 비교하였다. 재료 모델을 사용하여 S-레일 성형에 따른 스프링백 예측을 위한 유한요소해석을 수행하고 그 결과를 시험 측정값과 비교하였다. 이로부터 재료 모델의 한계와 가능성을 고찰하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.877-881
• /
• 2002

Much research efforts have been made on the equal channel angular pressing(ECAP) which produces ultra-fine grains. In this paper the ECAP processes with Zr-702 alloy at elevated temperature and at room temperature are considered. Both two-dimensional and three-dimensional finite element analyses have been employed to investigate the deformation behaviors of specimen during ECAP process.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.1-9
• /
• 2006

분말야금제품의 $90\%$를 점하는 소결기계부품의 기술동향에 대해서 주요한 재료기술과 제조기술에 초점을 두고, 고강도 혹은 고정도라고 하는 시장의 요구에 대응한 신소결재료의 개발 및 고밀도 혹은 복잡형상에 대응하는 온간성형이나 확산접합등에 관한 제조기술에 대해서 개설했다.

• 기계와재료
• /
• v.8 no.4 s.30
• /
• pp.108-117
• /
• 1996

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.326-339
• /
• 2001

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06b
• /
• pp.133-140
• /
• 1999