• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.793-798
• /
• 1995

알카리 및 알카리토금속, 전이금속원소, 액티나이드원소등 10개 원소로 구성된 질산매질의 모의 방사성용액에서 옥살산에 의한 Nd와 Am의 공침전 연구를 수행하였다. 모의용액중의 질산농도와 옥살산농도에 따른 Nd과 Am의 침전율과 정제도가 연구되었다. 각 원소들의 침전율은 옥살산이 증가함에 따라서 증가하고 질산농도에 따라서는 감소하였다. 각각 0.5M인 옥살산농도와 질산농도에서 Nd과 Am의 침 전율이 99%이상이 되고, 정제도 측면을 고려할 때 가장 좋은 것으로 판단되었다. Am은 Nd와 매우 잘 공침전됨을 확인하였으며, Zr이 존재할 시 Cs, Sr, Pd등과 공침됨을 알 수 있었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.113-116
• /
• 2002

UV/과산화수소법을 적용하여 유기염소계 농약인 chlorothalonil을 분해하는 공정에 있어서 광화학 반응의 효율을 증대시키는 방안으로 과산화수소와 옥살산염의 최적 주입농도를 선정하여 그 제거효율을 비교하였다. 그 결과 UV조사시 과산화수소의 농도가 100ppm일 때 일차반응속도 상수(k)가 0.0869로 가장 높게 나타났으며 옥살산염에서는 1mM일 때 0.1782로 높게 나타남으로써 과산화수소와 옥살산염의 최적 농도를 산출할 수가 있었다. 최적 과산화수소와 옥살산염을 조합하여 UV조사시 반응속도 상수값(k)이 0.1893으로 UV/옥살산염보다도 분해속도가 빠르게 나타났다.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.661-665
• /
• 2013

Effect of organic acid on the preparation of indium-oxalate salt from indium scraps generated from ITO glass manufacturing process was studied. Effects of parameters, such as type and concentration of organic acids, pH of reactant, temperature, reaction time on indium-oxalate salt preparation were examined. The impurity removal efficiency was similar for both oxalic acid and citric acid, but citric acid did not make organic acid salt with indium. The optimum conditions were 1.5 M oxalic acid, pH 7, $80^{\circ}C$, and 6 hours. On the other hand, the recoveries increased with pH, but the purity decreased. The indium-oxalate salt purity prepared by two cycles was 99.995% (4N5). The indium-oxalate salt could be converted to indium oxide and indium metal by substitution reaction and calcination.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.283-288
• /
• 1997

고 준위 방사성 액체 패기물의 옥살산 침전 공정을 통하여 침전여액이 발생된다. 이 침전여액에는 옥살산과 같은 유기 물질이 함유되어 있으며 이 물질의 제거는 방사성 폐기물의 긍극적인 처리 처분에 대단히 중요하다 본 연구는 모의 침전여액을 제조하고 이로부터 옥살산 제거 연구가 두 가지 방법으로 수행되었다. 첫째 과산화수소를 이용한 제거 법으로서 침전여액 내 Ru$^{+4}$ 와 Fe$^{+3}$ 는 과산화수소를 자체 분해시키기 때문에 옥살산 제거를 방해함을 알 수 있었다 둘째는 NaOH를 용액 내 첨가하는 방법으로 pH증가에 따라 침전이 발생되면서 COD는 상당히 감소함을 보여주었다. 침전물은 $Na_2$C$_2$O$_4$로 확인되었고 pH9 이상에서 99%이상 감소함을 보여 주었다.다.

• Journal of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.43-47
• /
• 1976

The determination of oxalic acid is carried out with Zr(IV)-XO complex by spectrophotometry. The Mechanism of this method in 1∼4N HCl solution is shown below (XO = xylenol orange); Zr(IV)+XO=Zr(IV)-XO+ excess XO, Zr(IV) - XO + oxalate = Zr(IV)-oxalate + XO When oxalic acid is added to Zr(IV)-XO complex(red color), the absorbance of Zr(IV) - XO complex is decreased in proportional to the amount of oxalic acid. The malic, malonic, maleic, fumaric, succinic, folic and glutamic acid did not interfere even if they are present in hundred times of oxalic acid. If they are present in the same amount as oxalic acid, citric and tartaric acid did not interfere but they are interfere when they are present in much more than that of oxalic acid.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.108-113
• /
• 1997

Decomposition of oxalic acid was studied in nitric acid media by using UV radiations. The UV source is Hg-lamp, emitting $2537{\AA}$ wavelength. Oxalic acid was not decomposed by itself in spite of UV radiation, but in the presence of nitric acid decomposed easily under UV radiation. It is believed that oxygen radical generated from nitrate ion by UV radiation results in the decomposition of oxalic acid. Decomposition rate of oxalic acid reached a maximum in around 0.5M $HNO_3$ and then gradually decreased with nitric acid concentration. The decrease can be also explained to be due to the reaction between oxygen radical and $NO_3{^-}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.471-477
• /
• 2010

Although the roles of calcium in plant are widely known, little is known about on an antagonistic effect of macro elements, oxalate biosynthesis and main shape of crystal in cucumber plant organs. Seeds of cucumber (Cucumis sativus cv. Ijoeunbackdadagi) were germinated in perlite tray supplied with distilled-deionized water. Seedlings were transplanted into aerated containers with a half strength of Ross nutrient solution. Ca levels treated in media were as follows; No-Ca, $Ca(NO_3)_2$ 0.25, 1.25 and 2.5 mmol $L^{-1}$, and $Ca(NO_3)_2$ 2.5 mmol $L^{-1}$ + $CaCl_210$, 25 and 50 mmol $L^{-1}$. Ca-deficient and -excessive conditions severely reduced cucumber growth, as compared to the control, and adversely affected an accumulation of macro elements (N, P, K, and Mg). Calcium favorably induced oxalate (acid-soluble) synthesis in leaves and roots of cucumber plant, but not in stem. Acid-soluble oxalate contents in leaves proportionally increased with Ca supply levels (0.91, P<0.001), however, this pattern was not observed in stem and roots. Ca-oxalate crystal formation and compositional analysis were examined using SEM-EDS technique in cucumber leaves. The main type of crystal revealed a prismatic crystal and main components were Ca, Na and Cl.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.345-356
• /
• 2011

To remove metal stains of the ceramics, chemical cleaning is essential case by case. This study investigated the removal characteristics of iron stains by oxalic acid and citric acid including their application methods of soaking and poultice. The soaking method in cleaning agents showed removal process by color difference and released iron contents from iron stains on ceramics. Iron stains were removed successfully from ceramics, which soaked in oxalic acid for 60 hours. However, it is recommendable to soak in 0.25M oxalic acid for one to three hours because most iron stains were disappeared in 3 hours soaking. Citric acid is less effective than oxalic acid in removing iron stains because of heavy molecular weight and low acidity. Poultices (bentonite, sepiolite, activated carbon fiber and celite) with oxalic acid were applied on contaminated ceramics. After ten hours, iron stains on ceramics were removed successfully by poultice. Among them, bentonite and sepiolite have better application. Therefore, sepiolite with 0.25M oxalic acid was applied on the iron stains of whiteware and celadon from Ma Island, and then stains were removed. However, it is judged that the application methods can be varied according to the form and depth of contaminant. In addition, the residues of poultice on the ceramics will be considered for preventing contamination.

• Journal of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.623-628
• /
• 1985

Rate constants for complexing with thiocyanate after ring opening of molybdenum-oxalate in acid media were obtained spectrophotometrically at 460nm. The acid-assisted dissociation of molybdenum-oxalate and the reaction of thiocyanate with oxalatooxomolybdenum (V) complex in acid media were investigated with thiocyanate and hydrogen ion concentration. The kinetic data indicate that molybdenum-oxalate is protonated to a limited extent in acid media and the protonated complex is responsible for an increase in rate for the reaction of thiocyanate with oxalatooxomolybdenum (V) complex. Replacement of an oxalate ligand in acid media has been interpreted in terms of dissociative mechanism involving bond-breaking of the oxygen trans to the yl oxygen.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.446-452
• /
• 2019

We have developed a method that can leach Co, Mn, and Ni in the cathode active material safely using lactic acid. When cathode active material was leached by lactic acid, lactic acid showed the highest efficiency at 2 N than 1 N and above 4 N concentration. When the cathode active material was added incrementally into the solution of lactic acid, the maximum solubility was 30 g/L at 2 N concentration. Oxalic acid was added in the solution of lactic acid and it showed that rare metals represent the most economical recovery efficiency at 4 g/L. Based on this study, it was found that the optimal condition for recovery of rare metals from cathode active material is oxalic acid : cathode active material = 7 : 1 as a ratio of weight. In addition, it was observed that the precipitate produced by oxalic acid is a polynuclear crystalline material bonded with 3 components of Co, Ni, and Mn.