• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.102-107
• /
• 2002

This paper describes a rapid determination of phenobarbital in intact phenobarbital tablets using partial least squares regression(PLSR) method of transmittance spectrum of near infrared (NIR) compared with the analytical data of liquid chromatograpy. The linearity, concentration range and precision of this analytical method are studied. The correlation coefficient of the calibration curve is 0.9983 and the standard error of calibration(SEC) is 0.14 %. Intra-day precision and Inter-day precision obtained in this method are CV = 0.45, CV =0.56, respectively.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.131-134
• /
• 2008

In this study, the lower detonation limits(LDL) and the upper detonation limits(UDL) of the flammable substances predicted with the appropriate use of the heat of combustion and the stoichiometric coefficient. The values calculated by the proposed equations were a good agreement with literature data within a few percent. From a given results, It is to be hoped that this methodology will contribute to the estimation of the detonation limits of for other flammable substances.

• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.64-69
• /
• 2013

The autoignition temperatures (AITs) of solvent mixture was important index for the safe handling of flammable liquids which constitute the solvent mixtures. This study measured the AITs and ignition delay time for n-propanol and formic acid system by using ASTM E659 apparatus. The AITs of n-Propanol and Formic acid which constituted binary system were $435^{\circ}C$ and $498^{\circ}C$, respectively. The experimental AITs of n-propanol and formic acid system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D. (average absolute deviation). And n- Propanol and formic acid system was shown the minimum autoignition temperature behavior (MAITB).

• Applied Biological Chemistry
• /
• v.35 no.4
• /
• pp.276-280
• /
• 1992

Quantutative analysis of catechins by HPLC was studied. When the mobile phase was switched from the conventional(AOAC) Methanol, Acetonitril and Acetic acid solution in $H_2O$ to 0.06% Phosphate solution with Acetonitrile, N,N-Dimethyl formamide, and Ethyl acetate, retention time could be reduced from 45 min to 28 min, especially, we obtained sharper chromatogram of the compounds, either (-)EGCG or (-)ECG, which resulted in minimization of analytical erros. CVs of retention time $(0.32{\sim}3.97%)$ and peak area $(1.61{\sim}7.01%)$ indicated that the data were more reliable. Content of catechins in commerical teas analyzed by the method was $120.3{\sim}153.7\;mg/g$ in green teas which was about 4 times that in black tea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.281-281
• /
• 2011

산업 환경에서 친환경 및 에너지효율성을 중요한 조건이 되면서 고효율성 및 다기능을 가진 재료에 대한 연구가 활발히 진행 되고 있다. 특히 Al-Ti-N 코팅은 이미 경도 측면에서 우수 하여 고속 공구 부품에 널리 사용되고 있고 최근에 Al-TiN에서 Si 첨가는 40GPa이상의 고경도와 1000도 이상의 산화온도를 지닌 나노 혼합물 코팅을 형성 시키는 것으로 알려져 있다. 본 연구에서 Al-Ti에 Si, Cu, Cr 을 첨가하였을 때 코팅을 형성하였을 때 바뀌는 물성 변화을 확인하였다. 이러한 연구를 위해 Al-Ti 합금 조성 중 가장 우수한 것으로 알려진 60:40으로 타겟을 만들어 스퍼터 장비를 이용해 코팅을 형성하여 기초 실험을 진행하였다. 그 근거로 하여 3원계인 Si, Cu, Cr 을 첨가하여 각각의 단일 타겟으로 만들고 코팅을 형성하였다. 타겟과 코팅의 성분이 동일한지 확인하기 위해 EPMA분석을 하였고 그 결과 오차 범위 내에 동일한 것으로 확인하였다. 또 내산화성 테스트를 위해 400도에서 1000도로 가열된 대기 중에 코팅 층을 1시간씩 노출시키는 공정을 통해 확인하였고 내식성 테스트는 SUS 304계열 위에 코팅을 하여 Potentiodynamic polarization scan 장비로 비교해 보았다. 표면경도는 3원계 코팅인 경우 질소비율이 증가할수록 30GPa ~ 35GPa까지 증가하였고 XRD 분석 결과와 비교 시 (111), (200) peak가 명확할수록 경도 값이 높은 것으로 확인하였다. 마모테스트 결과 3원계인 코팅 층이 dry상태에서 감소하는 경향을 보였다. 특히 0,26까지 감소한 Si 을 첨가한 코팅 층은 H/E지수도 좋아 마모트랙의 길이도 짧아 우수한 것으로 알 수 있었다. 이런 결과에서 보듯 3원소 이상 첨가 시 특성변화가 차이가 있다는 것을 알 수 있었다.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.310-318
• /
• 1999

The concentration breakthrough curves were examined to predict mass transfer coefficients of nitrogen and oxygen in adsorption column for design data of PSA process. Experimental breakthrough curves for bulk gas flow were compared with theoretical simulation results. For quantitative analysis of the adsorption, coupled Langmuir isotherm was considered and LDF model was used to describe the mass transfer effect. In the experimental and theoretical results, it was found that mass transfer coefficient was not affected by flow rate but strongly affected by pressure. As a result of this tendency, mass transfer resistance in this system was proved to belong to the macropore diffusion controlling region and the mass transfer coefficients could be expressed by exponential functions of pressure change. The mass transfer coefficients for one component, nitrogen or oxygen, were successfully applied to breakthrough curves for bulk mixed gases. The experimental curves were reasonably in consistent with the theoretical curves and the error time was less than 5 percent.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.636-642
• /
• 2007

Software program to predict the packing density of multi-sized and multi-component particulate system was developed. For this purpose, the experiment to measure the packing density of AP (ammonium perchlorate) and Al (aluminum) particles with different sizes and their mixtures was carried out. The packing densities obtained from various experiments were compared with the predicted data from the developed software program. In the case of the packing density of the binary system, which is comprised of two different size particles and/or two different components, the relative errors were ranged 0.25~13.13%, and in the same venue the relative errors of the ternary system were 0.25~13.13%. Agreement between experimental data and the predicted results is reasonably accurate. In order to achieve the targeted packing density, the software program calculated the contour of the component particles and this will contribute the formulation of optimal packing systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.257-263
• /
• 1994

The experiment was canied out to investigate the effects of cutting frequencies (3, 4 and 5 cuts per year) in relation to fertilization of mineral nitrogen on crude protein yield and the contents of crude protein and acid detergent fibre in orchardgms(Dacty1is glomerata L.). Tne results are as follows : 1. The content of crude protein increased according to the increase in cutting frequency and showed the highest in the 1st cut in all treatments. At 4 and 5 cutting frequencies per year, the content of crude protein increased in a large extent according to the increased fertilization of mineral nitrogen. However at 3 cutting frequency, the content of cmde protein appeared higher for no application of mineral nitrogen than for the treatments with fertilization. 2. 'Ihe content of acid detergent fibre(ADF) was considerably reduced at 4 and 5 cutting frequencies and in all treatments, the lowest were recorded in the 1st cut or in the last cut. At 3, 4 and 5 cutting frequencies, the highest ADF were shown in the 2nd cut, 3rd cut and 3rd cut respectively. However, the general trend was that the content of ADF was greatly reduced according to increased level of mineral nitrogen fertilization. 3. The yeild of cmde protein was the highest at 5 cutting frequency(l.2 ton DMIha) and it indicated that the yield of cmde protein increased in accordance to the increase in fertilization of mineral nitrogen and cutting frequency. 4. In all treatments, positive correlation(p<0.001) between the yeilds of crude protein and annual dry matter yield appeared. Negative correIation(p

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.78-83
• /
• 2007

Robot collects surrounding information to recognize tile unknown environment by using various sensors such as visual, infrared ray and ultra sonic sensors. Although visual sensor is the most popular one, it has some difficulties in collecting data in dark or too bright environment due to sensitivity of the light. It also requests significant amount of calculation on collecting data from certain images with marked, straight and curved ones. As an alternative, ultra sonic sensor can simply overcome this visual sensing system's flaw and easily be used. It is easier than visual system, especially in case of collecting data on object and distance in dark environment. Ultra sonic sensor can replace the expensive visual sensing system not only in avoiding obstacles but also in reaching to the target area smoothly. The purpose of this paper is to develop the algorithm to optimize the environmental recognition, path planning and free-ranging by minimizing errors caused by inaccurate information and by considering characteristics of the ultra sonic rays such as refraction and diffusion. This paper also realizes the system that can recognize the environment and make the appropriate path planning by applying the algorithm on this moving robot.

• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.24-30
• /
• 1986

The model foods similar to general Korean foods were prepared by combining starch, protein and moisture, and relationship between their thermal diffusivities and components were investigated. Thermal diffusivity of the model foods tended to be proportional with the moisture content. Under the same level of moisture content of the model foods, thermal diffusivity of the starch foods was higher than that of the protein foods, but no interaction among components was found. The measured values was quite agreed upon with the calculated values with 3.60 residual percent. The regression equations between thermal diffusivity and moisture, protein and starch contents at $20^{\circ}C$ and $60^{\circ}C$ were ${\alpha}20^{\circ}C$ = 0.04911M+0.37355P+3.73072, ${\alpha}60^{\circ}C$ = 0.05353M-0.4766P+4.15136, respectively. The correlation coefficients obtained according to the above equation were $0.9650^{**}$ and $20^{\circ}C$ and $0.9002^{**}$ at $60^{\circ}C$.