• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.286-292
• /
• 2014

Near infrared reflectance spectroscopy (NIRS) is a rapid and accurate analytical method for determining the composition of agricultural products and feeds. This study was conducted to measure baicalin, baicalein, and wogonin contents in Scutellaria baicalensis by using NIRS system. Total 63 samples previously were analyzed by HPLC, which showed baicalin, baicalein, and wogonin contents ranging 4.56 to 13.59%, 0.28 to 5.54%, and 0.50 to 1.63% with an average of 9.66%, 2.09% and 0.52%, respectively. Each sample was scanned by NIRS and calculated for calibration and validation equation. A calibration equation calculated by modified partial least squares(MPLS) regression technique was developed in which the coefficient of determination for baicalin, baicalein, and wogonin content was 0.958, 0.944, and 0.709, respectively. Each calibration equation was applied to validation set that was performed with the remaining samples not included in the calibration set, which showed high positive correlation both in baicalin and baicalein content file. In case of wogonin, the prediction model was needed more accuracy because of low $R^2$ value in validation set. These results demonstrate that the developed NIRS equation can be practically used as a rapid screening method for quantification of baicalin and baicalein contents in Scutellaria baicalensis.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.209-215
• /
• 2003

In this paper. We tested and fabricated the error amplifier for the 15 Watt linear power amplifier for the IMT-2000 baseband station. The error amplifier was comprised of subtractor for detecting intermodulation distortion, variable attenuator for control amplitude, variable phase shifter for control phase, low power amplifier and high power amplifier. This component was designed on the RO4350 substrate and integrated the aluminum case with active biasing circuit. For suppression of spurious, the through capacitance was used. The characteristics of error amplifier measured up to 45 dB gain, $\pm$0.66 dB gain flatness and -15 dB input return loss. Results of application to the 15 Watt feedforward Linear Power Amplifier, the error amplifier improved with 27 dB cancellation from 34 dBc to 61 dBc IM$_3$.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.220-226
• /
• 2011

In the elastic wave equations, both horizontal and vertical displacements are defined. Since we can measure both the horizontal and vertical displacements in field acquisition, these displacements compose a displacement vector. In this study, we propose a frequency-domain elastic waveform inversion technique taking advantage of the magnitudes of displacement vectors to define objective function. When we apply this displacement-vector objective function to the frequency-domain waveform inversion, the inversion process naturally incorporates the back-propagation algorithm. Through the inversion examples with the Marmousi model and the SEG/EAGE salt model, we could note that the RMS error of the solution obtained by our algorithm decreased more stably than that of the conventional method. Particularly, the density of the Marmousi model and the low-velocity sub-salt zone of the SEG/EAGE salt model were successfully recovered. Since the gradient direction obtained from the proposed objective function is numerically unstable, we need additional study to stabilize the gradient direction. In order to perform the waveform inversion using the displacementvector objective function, it is necessary to acquire multi-component data. Hence, more rigorous study should be continued for the multi-component land acquisition or OBC (Ocean Bottom Cable) multi-component survey.

• Journal of Korea Water Resources Association
• /
• v.43 no.4
• /
• pp.383-391
• /
• 2010

The groundwater recharge was assessed by using both SWAT and HELP models in Bocheong-cheon watershed. The SWAT model is a comprehensive surface and subsurface model, but it lacks the physical basis for simulating a soil water percolation process. The HELP model which has a drawback in simulating subsurface lateral flow and groundwater flow component can simulate soil water percolation process by considering the unsaturated flow effect of soil layers. The SWAT model has been successfully applied for estimating groundwater recharge in a number of watersheds in Korea, while the application of HELP model has been very limited. The subsurface lateral flow parameter was proposed in order to consider the subsurface lateral flow effect in HELP model and the groundwater recharge was simulated by the modified exponential decay weighting function in HELP model. The simulation results indicate that the recharge of HELP model significantly depends on the values of lateral flow parameter. The recharge errors between SWAT and HELP are the smallest when the lateral flow parameter is about 0.6 and the recharge rates between two models are shown to be reasonably comparable for daily, monthly, and yearly time scales. The HELP model is useful for estimating groundwater recharge at watershed scale because the model structure and input parameters of HELP model are simpler than that of SWAT model. The accuracy of assessing the groundwater recharge might be improved by the concurrent application of SWAT model and HELP model.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.409-414
• /
• 2011

This study was conducted to find out an alternative way of rapid and accurate analysis of forage quality. Near Infrared Reflectance Spectroscopy (NIRS) was used to evaluate the possibility of forage analysis. 175 samples consisted of Italian ryegrass, whole crop barley and pea seeded spring in 2009 were collected. The samples were analyzed for moisture, crude protein (CP), crude ash (CA), acid detergent fiber (ADF), and neutral detergent fiber (NDF), and also scanned using NIRSystem with wavelength from 400~2,500 nm. Multiple linear regression was used with wet analysis data for developing the calibration model and validated unknown samples. The important index in this experiment were SEC, SEP. The r2 value for moisture, CP, CA, ADF, and NDF in calibration set was 0.65, 0.97, 0.93, 0.99, and 0.97 and also was 0.15, 0.94, 0.96, 0.98 and 0.98 in validation set, respectively. The results of this experiment indicates that NIRS was reliable analytical method to assess forage quality for CP, CA ADF and NDF except moisture content in forage when proper samples incorporated into the equation development.

• Journal of Korea Water Resources Association
• /
• v.45 no.12
• /
• pp.1321-1330
• /
• 2012

In this study, the daily inflow at the basin of Chungju dam is predicted using wavelet-artificial neural network for nonlinear model. Time series generally consists of a linear combination of trend, periodicity and stochastic component. However, when framing time series model through these data, trend and periodicity component have to be removed. Wavelet transform which is denoising technique is applied to remove nonlinear dynamic noise such as trend and periodicity included in hydrometeorological data and simple noise that arises in the measurement process. The wavelet-artificial neural network (WANN) using data applied wavelet transform as input variable and the artificial neural network (ANN) using only raw data are compared. As a results, coefficient of determination and the slope through linear regression show that WANN is higher than ANN by 0.031 and 0.0115 respectively. And RMSE and RRMSE of WANN are smaller than those of ANN by 37.388 and 0.099 respectively. Therefore, WANN model applied in this study shows more accurate results than ANN and application of denoising technique through wavelet transforms is expected that more accurate predictions than the use of raw data with noise.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.220-227
• /
• 2016

Marine seismic data have not only primary signals from subsurface but also ghost signals reflected from the sea surface. The ghost decreases temporal resolution of seismic data because it attenuates specific frequency components. For eliminating the ghost signals effectively, the exact ghost delaytimes and reflection coefficients are required. Because of undulation of the sea surface and vertical movements of airguns and streamers, the ghost delaytime varies spatially and randomly while acquiring seismic data. The reflection coefficient is a function of frequency, incidence angle of plane-wave and the sea state. In order to estimate the proper ghost delaytimes considering these characteristics, we compared the ghost delaytimes estimated with L-1 norm, L-2 norm and kurtosis of the deghosted trace and its autocorrelation on synthetic data. L-1 norm of autocorrelation showed a minimal error and the reflection coefficient was calculated using Kirchhoff approximation equation which can handle the effect of wave height. We applied the estimated ghost delaytimes and the calculated reflection coefficients to remove the source and receiver ghost effects. By removing ghost signals, we reconstructed the frequency components attenuated near the notch frequency and produced the migrated stack section with enhanced temporal resolution.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.652-659
• /
• 2015

The aim of this study was to provide nutrition information to consumers by analyzing crude fat, saturated and trans fatty acids in commercial retort foods (n=70). The following sauce products of curries (n=21) and black-bean-sauces (n=16), other sauces (n=17) and instant cooking foods (n=16) were collected. Crude fat contents were quantified with the Rose-Gottlieb method using acid digestion. While saturated and trans fatty acids were examined by gas chromatography with a flame ionization detector (FID). Crude fat, saturated and trans fatty acid content ranges were $0.47{\pm}0.42{\sim}12.80{\pm}0.07g/100g$, $0.24{\pm}0.02{\sim}17.41{\pm}0.41g/100g$, $0.00{\pm}0.00{\sim}0.46{\pm}0.05g/100g$, respectively. Maximum recovery of analysis values was crude fat (119.7%), saturated fat (119%) and trans fatty acid (90%) compared the actual amounts based on the reference value indicated on the nutrition label. The analyzed samples were found to be compliant with nutrition label standard, because the contents of crude fat, saturated fatty acid, trans fatty acid were less than 120% of the reference value indicated on the nutrition label in retort foods. Therefore, the nutrition information on retort foods available to consumers was found to be trustworthy.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.21-29
• /
• 2018

The contents of total nitrogen(T-N), phosphate($T-P_2O_5$), and potash($T-K_2O$) are important factors to determine the application rate of the livestock compost to prevent nutrients accumulation and maintain their appropriate levels in arable lands. The concentrations of nutrient, organic matter, salt, water content, heavy metal in livestock compost in circulation were investigated with 659 samples from 2016 to 2017. In order to investigate the fluctuation nutrient contents of livestock composts with the same product name, 19 samples were collected and analyzed T-N, and $T-P_2O_5$, and $T-K_2O$ concentration during two years. The mean levels of T-N, $T-P_2O_5$, and $T-K_2O$ in livestock composts of from 2016 to 2017 were 1.73%, 1.88%, and 1.66%, respectively. The average contents of organic matter, water, and salt were 38.9%, 40.9%, and 1.2%, respectively. There were found that the maximum concentrations of Cr, Ni, Cu, and Zn in some livestock composts were exceeded the criteria of the official standard of commercial fertilizer. The maximum variation coefficient of T-N, $T-P_2O_5$ and $T-K_2O$ content of livestock composts was found to be 24%, 27%, and 50% on average, respectively. In order to manage the nutrients in agricultural soils, it will be reasonable that the error range of T-N and $T-P_2O_5$ content in livestock composts should be recommended to be 27% in mean as variation coefficient in case of displaying the nutrient element in liverstock compost.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.376-382
• /
• 2014

In this paper, we propose a advanced attitude PID controller and sensor fusion method robust to the vibration of the quadcopter unmanned air vehicle using four BLDC motors. When the gyro sensor and acceleration sensor are fused, a complementary filter is designed to ignore the vibrations generated by the motors and to complement the drawbacks. As a result, we obtain accurate results than using each sensor. Also, it is possible to obtain a low delay results in robust to vibration than the low-pass filter or moving average filter, which is generally used for quadcopter. And we improved D controller, which have being used for attitude control of quadcopter, to quadcopter using gyro sensor. it was confirmed that the attitude is stabilized and error is reduced By using gyro sensor output instead of variation of estimated angle in D control.