• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.381-391
• /
• 2008

The eigenvalue technique is introduced to overcome the problem of truncation errors caused by temporal discretization of numerical analysis. The eigenvalue technique is different from simulation in that only the space is discretized. The spatially discretized equation is diagonized and the linear dynamic system is then decoupled. The time integration can be done independently and continuously for any nodal point at any time. The results of eigenvalue technique are compared with the exact solution and FEM numerical solution. The eigenvalue technique is more efficient than the FEM to the computation time and the computer storage in the same conditions. This technique is applied to the solute transport analysis in nonuniform flow fields around underground storage caverns. This method can be very useful for time consuming simulations. So, a sensitivity analysis is carried out by using this method to analyze the safety of caverns from nearly located contaminant sources. According to the simulations, the reaching time from source to the nearest cavern may takes 50 years with longitudinal dispersivity of 50 m and transversal dispersivity of 5 m, respectively.

• Korean Journal of Poultry Science
• /
• v.17 no.2
• /
• pp.109-114
• /
• 1990

Enzymatic activity of isolated Lysozyme from egg white by cation ion-exchange chromatography was detected with various methods and stability of lysozyme in solution was studied by heat and pH treatments. Lysozyme activity refered to mg pure lysozyme/mg sample was more accurate although it needed standard lysozyme. But lysozyme activity refered to units/mg sample could be detected easily and reducted total detection time. Enzymatic activity of isolated lysozyme which dissolved in 0.066M phosphate buffer(pH 6.3) and then incubated at $37^{\circ}C$ for 2hr was increased remarkably on the lysis of Micrococcus lysodeikticus. The activity of isolated lysozyme by CM Sephadex C-25 was higher in eluting solution of above O. D. 1.0 at 640nm and attained 36, 000 units/mg solid. The stability of isolated lysozyme was decreased by various heat treatment. Activity began to decrease above 6$0^{\circ}C$ and dropped rapidly at $100^{\circ}C$. Especially, 35% loss of activity occured in 0.066M phosphate buffer at $100^{\circ}C$. for 15min. The stability of lysozyme was also affected by pH. lysozyme was very stable in acidic solution but in alkaline solution. Enzymatic activity showed maximum value at pH 3.0 solution while decreased rapidly above pH 6.0 solution.

• Journal of Biomedical Engineering Research
• /
• v.22 no.5
• /
• pp.459-468
• /
• 2001

The Average Coordinate Referenee System (ACRS) method is developed to reduce experimental errors in human locomotion analysis. Experimentally measured kinematic data is used to conduct analysis in human modeling, and the model accuracy is directly related to the accuracy of the data. However. the accuracy is questionable due to skin movement. deformation of skeletal structure while in motion and limitations of commercial motion analysis system . In this study. the ACRS method is applied to an optically-tracked segment marker system. although it can be applied to many of the others as well. In the ACRS method, each marker can be treated independently. as the origin of a local coordinate system for its body segment. Errors, inherent in the experimental process. result in different values for the recovered Euler angles at each origin. By employing knowledge of an initial, calibrated segment reference frame, the Euler angles at each marker location can be averaged. minimizing the effect of the skin extension and rotation. Using the developed ACRS methodology the error is reduced when compared to the general Euler angle method commonly applied in motion analysis. If there is no error exist in the experimental gait data. the separation and Penetration distance of the femoraltibial joint using absolute coordinate system is supposed to be zero during one gait cycle. The separation and Penetration distance was ranged up to 18 mm using general Euler angle method and 12 mm using the developed ACRS.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.329-338
• /
• 1994

The retention behaviors of natural gas components were studied on a single column by gas chromatography. The dead time, $t_0$ was obtained by using extrapolation of homologous series to determine capacity factors. The plots of retention data for homologous series and carbon number at different temperatures were shown to converge into a single point, which point was determined as a dead time. The results of the effect of temperature on the column efficiency for n-butane exhibited the plate number, N incerased with temperature, but the resolution among the fast eluted components decreased. The adsorption enthalpy (${\Delta}H^0{_{ads}}$) for each component on 28% DC 200 stationary phase was determined, and in order to investigate the retention behaviors of natural gas components the regression analysis of log $t_R$, log k' and log ${\alpha}$ vs. van der Waals volume(Vw), molecular connectivity index(X) and hydrophobic fragmental constant(f) were carred out. Good correlation was found between log k' vs. Vw, and log k' vs. f. The correlations between the physical properties of natural gas and the physical parameters were investigated by the linear regression analysis. The relationships between Vw vs. molecular weight and heating value(${\Delta}H_{comb}$), X vs. boiling point, and f vs. molecular weight, boiling point and heating value exhibited the high correlation coefficient more than 0.99. Using the regression equation between the heating value of natural gas and Vw the predicted heating values from $C_6$ to $C_{10}$ showed good agreement with those reported in the literature within 0.2% relative error.

• The KIPS Transactions:PartB
• /
• v.14B no.7
• /
• pp.493-502
• /
• 2007

An on-line registration technique is presented to register multi-view range images for the 3D reconstruction of real objects. Using a range camera, we first acquire range images and photometric images continuously. In the range images, we divide object and background regions using a predefined threshold value. For the coarse registration of the range images, the centroid of the images are used. After refining the registration of range images using a projection-based technique, we use a modified KLT(Kanade-Lucas-Tomasi) tracker to match photometric features in the object images. Using the modified KLT tracker, we can track image features fast and accurately. If a range image fails to register, we acquire new range images and try to register them continuously until the registration process resumes. After enough range images are registered, they are integrated into a 3D model in offline step. Experimental results and error analysis show that the proposed method can be used to reconstruct 3D model very fast and accurately.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.89-95
• /
• 2016

Mo isotope, one of highly redox-sensitive isotopes, has been shown to be useful tracers of geochemical processes. Many studies for Mo isotope have documented with the help of recently developed analysis tools, but it has not yet been documented in the Korea. In this study, we introduce two-stage column separation method of Mo using column tube (BioRad PolyPrep(R) column, 10 ml) and anion exchange resin (BioRad Resin AG(R) 1-X8, 200-400 mesh). Mo isotope ratios in the solid SRMs (BHVO-2, SDO-1, PACS-2) and liquid SRM (IAPSO) were measured on MC-ICP-MS (Multi-collector Inductively Coupled Plasma Mass Spectrometer) and then compared with reference Mo isotope ratios. Mo isotope ratios in our study overlap with reference Mo isotope ratios within analytical error.

• Analytical Science and Technology
• /
• v.25 no.1
• /
• pp.83-90
• /
• 2012

The objective of the study was to estimate the measurement uncertainty associated with determination of creatinine (Cr) in urine samples by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Centrifuged urine samples (10 ${\mu}L$) were diluted with 390 ${\mu}L$ of distilled water. To 20 ${\mu}L$ aliquots of diluted urine samples, 30 ${\mu}L$ of internal standard solution (Cr-$d_3$, 5 ${\mu}g/mL$) and 10 ${\mu}L$ of acetonitrile were added and filtered. The samples (1 ${\mu}L$) were introduced into LC-MS/MS with no further pretreatment. Cr was separated on a multi-mode ODS column (Scherzo SM-C18, 75 ${\times}$ 2.0 mm I.D., 3 ${\mu}m$) and quantified by LC-MS/MS operating in MRM mode (Cr, m/z 114.0${\rightarrow}$ 86.0; Cr-$d_3$, m/z 117.0${\rightarrow}$ 89.1). The four factors that contribute uncertainty to the final result were extracted and evaluated. The principal factors of contribution to combined standard uncertainty were sample dilution, calibration curve and repeatability, while the preparation of standard solution was only a minor factor. Relative extended uncertainty of the measured concentration was 14.2% in a real urine sample.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.295-304
• /
• 2001

Characterization of quantitative trait loci (QTL) was investigated in the experimental crosses between Berkshire and Yorkshire breed. A total of 525 F$_2$ progenies from 65 matting of F$_1$ Parents were produced. Phenotypic measurements included average daily gain (ADG), average back fat thickness (ABF), and loin eye area (LEA). To identify the presence of QTL for reproductive performance, birth weight (BWT) and body weight at 16 days (16DAY) were included as indirect trait. QTL segregation was deduced using 8 markers assigned to chromosome 2 (SSC2). Quantitative trait locus analyses were performed using interval mapping by regression under line-cross model. Presence of imprinting was tested under the statistical model that separated the expression of paternally and maternally inherited alleles. To set the evidence of QTL presence, significance thresholds were derived by permutation following statistical tests, respectively. Genome scan revealed significant evidence for three quantitative trait loci (QTL) affecting growth and body compositions, of which two were identified to be QTL with imprinting expression mode near the ICF II gene region. For average back fat thickness (ABF), a paternally expressed QTL was found on chromosome 2 (SSC2). A paternally expressed QTL affecting loin eye area (LEA) was found in the region of SSC2 where evidence of imprinted QTL was found for average back fat thickness (ABF). For average daily gain (ADG), QTL expressed with Mendelian mode was found on chromosome 2 (SS2). Also, QTL affecting average daily gain (ADC), was identified to be expressed with Mendelian express mode.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.731-738
• /
• 2003

The technique known as proteomics is useful for characterizing the protein expression pattern of a particular tissue or cell type as well as quantitatively identifying differences in the levels of individual proteins. In present study, we carried out the comparative expression patterns of white and red muscles. We used the two-dimensional electrophoresis(2-DE) for analyzing the protein expression. Proteins isolated from porcine white and red muscles were separated by 12% poly-acrylamide gel and then were detected by coomassie blue and silver staining. More than 600 protein spots were detected on each 2-DE gel. By visual analysis of the stained gel, five proteins were identified to be differentially expressed in the white vs red muscle. By database searching based on the molecular weights and pI(isoelectric point) of the five proteins, three of them were found to be most close to troponin I, T and myoglobin. However, further researche is needed for identification and functional analysis of the unidentified proteins. In conclusion, we found five proteins, which are differentially expressed in the white vs red muscle. The functional analysis of the differentially expressed proteins will provide valuable information on biochemical characteristics of the muscle type.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.287-308
• /
• 2009

This article examines the distributional characteristics of the return of Chinese stock market indices. The majority of previous empirical researches have tended to focus upon the simple stock market index. However, this study focuses on the four indices which represent the characteristics of each stock market index. The empirical findings indicate that the returns of the four chinese indices are not normally distributed at conventional levels. The Ljimg-Box -statistics indicate the returns of the index of A shares are not serially autocorrelated. However, the returns of the index of B shares are serially autocorrelated. The empirical findings also indicate returns of the four chinese indices are not serially autocorrelated. The statistics of Regression Specification Error Test and ARCH indicate the returns of all four indices are not serially linear. The findings also indicate that E- GARCH model is the most fittest model for the returns of the four chinese indices and the forecast error can be reduced by using student t distribution rather normal distribution.