• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.23-29
• /
• 2017

This paper introduces the mold technology for the development of ultra-compact package of less than 1mm, and also analyze the error pattern of the results using this mold technology. The existing ultra-small mold structure was one-piece, which caused the surface of EDM to be rough and increase the error rate. This has been an obstacle to further reducing the size of the mold. On the other hand, the proposed mold technology tries to overcome the limitation of the one-piece type by using the prefabricated type method. This paper also classify defect patterns in the results of the proposed mold structure and analyze the occurrence probability of each pattern to use as a basic data to develop a detector.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.11-25
• /
• 2011

The Miller algorithm is employed in the typical pairing computation such as Weil, Tate and Ate for implementing ID based cryptosystem. By analyzing the Mrabet's attack that is one of fault attacks against the Miller algorithm, this paper presents au efficient fault attack in Affine coordinate system, it is the most basic coordinates for construction of elliptic curve. The proposed attack is the effective model of a count check fault attack, it is verified to work well by practical fault injection experiments and can omit the probabilistic analysis that is required in the previous counter fault model.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.491-494
• /
• 2008

기존의 전력량계의 원격 검침을 위한 DLMS/COSEM(Device Languag Message Specification / Companion Specification for Energy Meters) 시스템에서의 실제 송, 수신되는 데이터를 수집하여 이를 표현 및 분석 할 수 있는 프로그램을 구현하여 이로 하여금 실제 검침원에게 시스템에서의 송 수신되는 데이터의 흐름을 한 눈에 볼 수 있게 하였다. 또한 데이터의 실제 값 들을 분석하여 이틀을 가시적으로 볼 수 있어 오류 발생 시에 세부적으로 데이터를 분석하여 오류 원인을 찾아 낼 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06b
• /
• pp.35-40
• /
• 1999

이 논문은 디지털 TV의 압축 비트열을 전송할 때, 채널 오류로 인해 디지털 TV 디코더에서 화면을 재생할 때 발생할 수 있는 화질의 저하를 최소화시키는 방법을 기술한다. 텔레비전과 같은 단방향 방송 시스템에서 전송 도중에 오류가 발생하여 수신측에서 전송 오류를 제대로 정정하기 곤란할 때, 재생된 화면이 심각하게 훼손될 수 있다. 이때 오류로 인한 화면의 손상을 주변의 공간적 또는 시간적 상관 정보를 이용하여 화면을 복원하는 동작을 오류 은폐라고 한다. 최근 디지털 TV나 고선명 TV의 기본 부호화 방식으로 많이 사용하고 있는 MPEG 비디오 표준 방식은 공간적인 중복 정보를 압축하기 위해 DCT 변환을 수행하며, 시간적인 중복 정보를 압축하기 위해 움직임 예측과 움직임 보상 방법을 이용한다. 또한 MPEG 비디오 압축 방식은 일종의 차분 부호화 방법을 사용하기 때문에 현재 화면에서 오류가 발생하면 현재 화면뿐만 아니라, 시간적으로 나중에 부호화된 화면에도 오류가 전파된다. 본 논문에서는 MPEG 비트열의 채널 오류의 영향을 분석하여 화면간에 존재하는 시간적인 중복성을 이용하여 움직임 벡터를 추정하여 손상된 부분을 은폐시키는 방법을 제안한다. 기본적으로 손상된 매크로블록의 위와 아래로 인접한 화소값들을 움직임 벡터의 추정에 사용한다. 제안된 방법들 중에서 주변 움직임 벡터들의 가중치를 이용한 평균값 방법과 초기 움직임 벡터를 이용한 확장 영역 움직임 추정 방법이 우수한 결과를 보였다.

• Neonatal Medicine
• /
• v.18 no.2
• /
• pp.301-309
• /
• 2011

Purpose: Point-of-care tests (POCTs) have the potential to significantly influence management of neonates. The aim of this study was to assess the clinical usefulness of the POCT chemistry analyzer in a neonatal intensive care unit (NICU). Methods: Blood samples of neonates admitted to the NICU were tested using a POCT chemistry analyzer (Piccolo Xpress Chemistry Analyzer, Abaxis, Union City, CA, USA) and a central laboratory chemical analyzer (Chemistry analyzer 7600-110, Hitachi Ltd., Tokyo, Japan) from March to September, 2010. Correlation of 15 analytes between the POCT and the central laboratory machine was evaluated. For consistency of the POCT, three consecutive samplings were performed. Differences among the three tests were recorded. The causes of performance errors were checked through log files. Results: One hundred of 112 pairs of tests for accuracy performed in 54 neonates showed a high correlation between the two machines. Twelve performance errors occurred during the 112 tests. The most common error was insufficient sample error. Eighteen triplet tests performed in 18 patients for consistency revealed a difference range of 3-10%, which was considered to be acceptable. No error occurred during the 54 tests. Conclusion: The POCT is capable of analyzing multiple analytes with a minimal amount of whole blood in a short time. The few performance errors noted presently are likely preventable. This POCT is concluded to be suitable for use as a simple and rapid diagnostic method in the NICU with a minimal amount of blood collected in a less invasive manner.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.112-117
• /
• 2015

In order to establish the quality control on patient safety following the guideline presented by American Association of Physicists in Medicine (AAPM) TG-100 committee, we aim to analyze the modes based on errors occurred during treatment of patients at the radiation oncology department at Yeungnam University Hospital and establish a quality control guideline for patient safety when patient-centered radiation treatment is conducted. We aim to analyze the errors that can occur during radiation treatment at the radiation department, and assess the frequency of error, the severity of error affecting patients, and probability of proceeding without noticing error, with scores. The places where errors can take place were divided into CT simulation treatment room, treatment planning room, and treatment room for the analysis. In CT simulation treatment room, an error from using the immobilization device showed the highest Risk Priority Number (RPN) value of 60, and an error from simulation treatment information input showed the lowest of 6. In treatment planning room, an error from selecting the radiation dose calculation model showed the highest RPN value of 168, and an error of patient treatment start date showed the lowest of 36. In treatment room, a Table Bar error showed the highest RPN value of 252, a weight change error showed 190, and a Pillow error showed the lowest of 24.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.51-72
• /
• 2021

The purpose of this study is to explain the types and causes of errors in zoning data that occur in the topographic map notification procedure, and to prepare a data maintenance plan. In Korea, like the United States, law-based land use regulation is dominant. In other words, according to the land use regulation method in the Act, the government designates zoning for all lots in the country, and landowners check the land use regulations of their land through the Korea Land use Information System. The land use plan confirmation document is important land information that affects the results of administrative dispositions such as land transactions between individuals or permission for development activities. However, there are data errors that occur during the current topographic map notification procedure and data construction process. Therefore, four local governments that can verify data by type were selected in consideration of local government conditions. A number of errors are first, errors in data construction and management in the Korea Land use Information System, and second, errors in lack of expertise that occur while the local government officials maintain data. Third, it was analyzed as an error from the relationship between the serial cadastral map and the zoning DB. Based on the above results, it is hoped that the results of this study will be reflected in the establishment of the KLIP and the reform of the legal system, which is currently underway after the establishment of the 「3rd the Korea Land use Information System Construction Plan」.

• Journal of Educational Research in Mathematics
• /
• v.25 no.3
• /
• pp.281-302
• /
• 2015

In the current study, answer sheets from 8007 students in 236 Korean schools were selected and analyzed to examine errors that emerge in the process of solving descriptive questions of the National Educational Achievement Assessment in mathematics. Questions used in the analysis were response assessment covering middle school mathematics topics: "mathematical symbols and equations" and "functions." The behavioral domain of the questions was that of "problem solving and computation," which requires establishing an equation for a word problem and allows the calculation of an answer that meets a certain condition. The analysis results revealed various errors in each stage of each question, from understanding to solving; the study attempts to conjecture causes for these errors and draw pedagogical implications.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.497-500
• /
• 2016

최근 임베디드 소프트웨어의 신뢰성과 안전성을 보장하기 위하여 코딩룰인 MISRA-C를 자동차 뿐만 아니라 군사, 의료 분야등 광범위한 분야에서 이용하고 있다. 하지만 MISRA-C가 자동차 시스템분야의 MISRA 가이드를 이용하여 개발되었기 때문에 타 분야의 분야별 특성을 모두 고려하지 못한다는 문제점이 제시되고 있다. 따라서 본 논문에서는 향후 의료기기 분야의 특성을 고려한 코딩룰을 제시하기에 앞서, 의료기기 소프트웨어에서의 코딩룰 필요성을 제시한다. 이를 위해 개발 단계의 의료기기 소스코드에 MISRA-C를 적용하여 정적 분석을 해보고, 적용 유무 따른 실행시간 오류 결과를 분석한다. 분석 결과, 코딩룰을 이용하면 실질적으로 실행시간 오류 발생을 막을 수 있고, 적용 과정에서 기타 다른 실행시간 오류들 또한 해결됨을 확인하였다. 위 결과로 본 논문에서는 의료 분야의 특성을 고려한 특화 코딩룰의 필요성을 제시한다.

• KIISE Transactions on Computing Practices
• /
• v.23 no.5
• /
• pp.304-309
• /
• 2017

Programmers use multiple languages to reuse legacy code best suited to their problems. However, it is quite challenging to develop error-free multilingual programs because new types of bugs occur since misunderstanding about language interfaces such as Java Native Interface (JNI) and Python/C. There is a considerable amount of research to overcome multilingual program bugs and errors but these researches have less consideration about substantiality of programming languages, language interfaces, and bugs to evaluate their analyses and tools. In this paper, we have identified and establish substantiality of multilingual programming research with empirical study about diversity and interoperability of programming languages in Ubuntu software ecosystem based on real-world statistical data.