• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.09a
• /
• pp.247-252
• /
• 1994

우리나라 산사태의 대부분은 사면의 깊이가 얕은 상태에서 발생하며, 지형적 지질적 및 강우조건에 따라 각기 다른 사면 파괴의 형태를 보여주고 있다. 본 논문에서는 IFDM의 기법을 이용하여 강우침투에 의해 발생할 수 있는 불포화지반으로의 침윤전선의 진행, 간극수압의 시간적 발생과정 등을 포함하는 침투해석을 수행하였다. 침투해석으로 얻은 강우침투 결과를 hyperbolic 응력, 변형을 모델에 조합하여 시간별로 응력, 변형해석을 할 수 있는 모델을 제안하였다. 이 모델에 의한 해석예로써 용인군 창리 산사태 지역을 선택하여 기존의 한계평형법과 본 논문에서 제안한 모델의 결과를 비교하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.151-151
• /
• 2004

현재 세계 기술은 고집적화, 소형화, 고속화, 정밀화 된 시스템을 추구하고 있으며 기계적인 요소와 전기적인 요소를 통합한 장비의 개발에 초점을 맞추고 있다. 그 예로 일렉트로닉스, 옵토일렉드로닉스, 옵틱스, MEMS 등을 들 수 있다. 이러한 장비들은 초정밀 위치 결정을 위해 미크론 단위 또는 나노 단위의 분해능을 가진 구동기가 필요하다. 이러한 구동기에 많이 사용되는 대표적인 재료에는 자기변형 재료와 압전 재료가 있다. 압전 재료는 현재 구동기에서 가장 많이 사용되는 재료이지만 피로현상, 드리프트 및 출력 힘이 작은 문제점을 가지고 있다.(중략)

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.69-77
• /
• 2011

Purpose: This study was retrospectively performed to compare the clinical outcomes of modified Brostrom procedures using the single suture anchor and the double suture anchor for chronic lateral ankle instability. Materials and Methods: Thirty-seven patients were followed up for more than 1 year after the modified Brostrom procedures using suture anchor. Single surgeon treated seventeen cases with single suture anchor and 20 cases with double suture anchor. The clinical evaluation was performed according to the Karlsson scale and Sefton grading system. Radiologic measurement of the talar tilt and anterior talar translation was performed through anterior and varus stress radiographs using Telos device. Results: The Karlsson scale had improved significantly from preoperative average of 45.2 points to 89.4 points in single suture anchor group, and from 46.4 points to 90.5 points in double suture anchor group. According to the Sefton grading system, 15 cases (88.2%) in single suture anchor group and 18 cases (90%) in double suture anchor group achieved satisfactory results. The talar tilt angle and anterior talar translation had improved significantly from preoperative average of $13.6^{\circ}$ and 8.6 mm to $5.4^{\circ}$ and 4.1 mm in single suture anchor group, from $14.1^{\circ}$ and 8.4mm to $3.9^{\circ}$ and 4 mm in double suture anchor group. Double suture anchor technique was significantly superior in postoperative talar tilt. Conclusion: Single and double suture anchor techniques produced similar clinical and functional outcomes except for talar tilt, which was significantly superior in double suture anchor group. Both modified Brostrom procedures using the single and double suture anchor appear to be effective treatment methods for chronic lateral ankle instability. Further evaluation of clinical outcomes and biomechanical studies in athletes are needed.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.1
• /
• pp.11-16
• /
• 2011

Purpose: This study was aimed to analyze the incidence and the anatomical distributions of HME (Hereditary Multiple Exostoses) on upper limbs and its related change in alignment of the upper limbs in HME patients. Materials and Methods: Thirty eight patients who had been diagnosed HME between 2001 and 2009, were categorized into two groups; (1) group A (1-2 involvements); (2) group B (${\geq}$3 involvements). We checked the carrying angle, VAS (Visual Analogue Scale), limitations in daily activities, cosmetic satisfaction according to the number of exostoses invasion. Results: Among the 38 patients, 23 patients (43 cases) had exostoses in the upper limbs. The locations of exostoses in the upper limbs were proximal humerus in 33 cases (30%), distal ulna in 31 cases (28.2%), and distal radius in 24 cases (21.8%). The carrying angle of group A and B was $10.7^{\circ}$, $13.8^{\circ}$, VAS was 1.3, 3.5, and the limitations in daily activities was 7.3, 6.6 of 8 points. The cosmetic satisfactory cases were 13 and 10 cases, respectively. Conclusion: The deformity in upper limbs was observed in 65% of the HME patients. As the number of invasion increases, carrying angle and VAS were increased but limitations in daily activities and cosmetic satisfaction were decreased.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.113-119
• /
• 2003

In this paper we introduced optimized deformed shape to prevent the blood vessel disease caused by the discord of deformed shape in the end-to-end anastomosis. This study considered the preliminary deformed shape induced by suture in the anastomosis of artery and PTFE, artificial blood vessel, with different diameters. Then we analyzed the final deformed shape of the anastomotic part under the systolic blood pressure. 120mmHg(16.0kPa). The final deformed shape of the anstomotic part was analyzed with respect to the change of initial diameter ratio(R$_{I}$) and the PTFE thickness. Equivalent and circumferential stresses induced by the systolic blood pressure in the anastomosis were also analyzed with respect to the initial diameter ratio(R$_{I}$). The results obtained were as follows : 1. Considering the preliminary deformed shape induced by suture and the systolic pressure in the anastomosis, not intimal hyperplasia, the optimal initial diameter ratio(R$_{I}$) was 1.073. 2. As the initial diameter ratio(R$_{I}$) became larger, higher equivalent and circumferential stresses were induced. And all the maximum stresses occurred on the side of PTFE 0.4mm apart from the anastomosis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.37-39
• /
• 2011

예선이 부선을 예인줄로 연결하여 운항할 시 예인줄에 걸리는 장력 및 형상을 예인줄을 다물체로 분할하여 모델링하였다. 이러한 예인줄 요소에 대한 횡동요를 제외한 5자유도 운동방정식을 구성하고, 각 요소들에 작용하는 힘을 정식화하여 연성 운동방정식을 도출하였다. 예인줄 요소들 간에는 예인줄의 재료 특성에 따른 강성을 가진 스프링과 감쇠장치로 연결하여 동력학적 조건을 부가하였고, 요소의 변형을 허용하는 형태로 운동학적 조건은 설정하지 않았다. 예인줄의 다물체 모델링의 검증을 위하여 단순 낙하, 직진, 사인파 형태로 지그재그로 움직이는 예선과 단순 항력체로 가정한 부선의 운동에 대한 시뮬레이션을 수행하였다.

• Journal of the KSME
• /
• v.29 no.3
• /
• pp.244-252
• /
• 1989

평면변형조건에서 성형한계를 빠르고 정확하게 측정할 수 있는 방법을 개발하는 것도 중요하다. 평면변형조건에서의 성형한계를 구하는 데에는 펀치 스트레칭이 주로 이용되지만 그 외에도 여러 가지 방법들이 시도되고 있다. 평면변형조건에서 펀치스트레칭 시험을 행하여 파단이 일 어날 때까지의 펀치 행정거리를 한계 돔 높이(limiting dome height)라 하여 선진 제국에서는 박판금속의 성형성에 대한 품질관리 수단으로서 이용하고 있다. 우리나라의 박판금속의 성형 업계에서도 새로운 공정의 개발에 있어서 성형한계도와 변형측정법을 이용하므로서 시행착오를 줄이고, 한계돔 높이에 의한 품질관리기법을 이용하므로서 불량율저감 및 생산성 향상을 기할 필요가 있다 하겠다. 각종 재료에 대하여 측정한 성형한계에 관한 자료는 그 대표적인 값(예를 들면, 평면변형에서의 성형한계 값)으로서 컴퓨터에 저장하여두면 성형성에 대한 CAE에 의한 분석시에 편리하게 이용될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.4
• /
• pp.453-459
• /
• 2004

25Cr-20Ni series strainless steels have an excellent high temperature strength high oxidation and high corrosion resistance. However, further improvement can be expected of creep strength by work hardening prior creep. In the present study, the effect of prestraining at room temperature on the creep behavior of a Class M(STS310S) and a Class A(STS310J1TB) alloy containing precipitates have been examined. Prestaining was carried out at room temperature and range of prestrain was 0.5-2.5 % at STS310J1TB and 2.0-7.0% at STS310S. Creep behavior and creep rate of pre-strained specimens were compared with that of virgin specimens. Room temperature prestraining produced the creep life that is longer than that of a virgin specimen both for STS310J1TB and STS310S when creep test was carried out at the temperature lower than recrystallization temperature. The reason for this improvement of creep life was ascribable to the interaction between dislocations and precipitates in addition to the dislocation-dislocation interaction in STS310J1TB and the dislocation-dislocation interaction in STS310S. The beneficial effect of prestraining in STS310J1TB was larger than that of STS310S.

• Journal of the KSME
• /
• v.22 no.5
• /
• pp.389-398
• /
• 1982

금속의 가공변형에 대한 체계적이며 이론적인 해석은 상당히 발달되어 왔으나, 이론해석의 증 명이나 개발을 위한 실험적 기술은 경시되어 왔다. 지금까지 사용되었고, 또 금속공정을 공부하는 학생과 기술자 본문에서 도움이 될 금속유통에 대한 실험방법을 본문에서 몇 가지 예와 함께 기 술하고자 한다.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.3
• /
• pp.253-260
• /
• 2021

Purpose: The least constrained prosthesis is generally recommended in primary total knee arthroplasty (TKA). Nevertheless, a varus/valgus constrained (VVC) prosthesis should be implanted when a semi-constrained prosthesis is not good for adequate stability, especially in the coronal plane. In domestic situations, however, the VVC prosthesis could not always be prepared for every primary TKA case. Therefore, it is sometimes impractical to use a VVC prosthesis for unsual unstable situations. This study provides information for preparing VVC prostheses in the preoperative planning of primary TKA through an analysis of primary VVC TKA cases. Materials and Methods: This study reviewed 1,797 primary TKAs, performed between May 2003 and February 2016. The reasons for requiring VVC prosthesis and the preoperative conditions in 29 TKAs that underwent primary TKA with a VVC prosthesis were analyzed retrospectively. Results: In primary TKA, 29 cases (1.6%) in 27 patients (6 male and 21 female) used VVC prosthesis. Two patients underwent a VVC prosthesis on both knees. The mean age of the patients was 63.4 years old (34-79 years). The mean flexion contracture was 16.2° (-20°-90°), and the mean angle of great flexion was 111.7° (35°-145°). The situations requiring a VVC prosthesis were severe valgus deformity in 10 knees, knee stiffness requiring extensive soft tissue release in 10 knees, previously injured collateral ligaments in five knees, and distal femoral bone defect due to avascular necrosis in four knees. The mean tibiofemoral angle was 25.7° (21°-43°) in 10 cases with a valgus deformity. The mean flexion contracture was 37.5° (20°-90°), and the mean range of motion was 48.5° (10°-70°) in 10 cases with knee stiffness. Conclusion: The preparation of VVC prosthesis is recommended, even for primary TKA in cases of severe valgus deformity (tibiofemoral angle>20°), stiff knee (the range of motion: less than 70° with more than 20° flexion contracture), and the cases with a previous collateral ligament injury. This information will help in the preparation of adequate TKA prostheses for unusual unstable situations.