• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.195-202
• /
• 2002

The primary objective of Supply Chain Management (SCM) is to optimize the cash, material and information flow for satisfying customer demands through coordinating the relationship between Supply Chain components such as suppliers, manufacturers, and inventories, etc. By Supply Chain Planning (SCP), operation tasks or goals, should be done in specific due date, are ordered to each SC component for achieving such objective. However, the achievement for operation tasks or goals is affected by uncertainties in SC. In general, reliability theory Is explained as the probability that a product or system will perform its specified function under prescribed conditions without failure for a specified period of time. Therefore, the reliability of SC can be defined as the probability that SC will satisfy customer demands until the specific due date. In this paper, a basic framework to evaluate reliability is respectively proposed as supply chain components, and then a overall framework to estimate the reliability for SC is also proposed.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.73-84
• /
• 1994

Output analysis is one of the most important fields of simulation to achieve the accurate simulation results. This study shows how to analyze simulation output data in the steady state using Procrustes analysis technique which has not been used in the field of simulation yet. In this paper Procrustes analysis method is used to perform the analysis of simulation output efficiently and effectively by applying the improved version of the method. The experiments are conducted using M/M/1 queueing simulation model. The results obtained by Procrustes analysis method show better estimates for average waiting times and average queue lengths which are closer to true values and narrower confidence intervals than when replication-deletion method is used. Also it requires the smaller number of simulation runs.

• 생명과학회지
• /
• 제11권4호
• /
• pp.371-378
• /
• 2001

The effects of the RM 60 series on DNA replication systems were examined by using simian virus 40 (SV40) DNA replication system in vitro. The RM 60 series inhibited the DNA replication in the initiation step rather than in the elongation step. Polymerase$\alpha$-primase activity and toposiomerase I activity study were performed subsequently, the RM 60 seies increased the polymerase $\alpha$-primase activity in a low dose, but decreased the activity in a higher dose. The topoisomerase I activity was inhibited by the RM 60 series. This result suggests that the RM 60 series might inhibit some molecules which are required to establish replication forks during the initiation step of the DNA replication.

• 대한치과의사협회지
• /
• 제10권3호
• /
• pp.149-153
• /
• 1972

The apical foramen is not always found on the very tip of the root. The apical foramen may make its exit on the mesial, distal, labial or lingual side of a root slightly short of the root apex rather than at the root apex itself. The author collected 43 upper first molars and 84 lower first molars as a samples. Apical foramens were carefully checked and examined these location on each tip. (table 1) 1. About 33% to 49% of upper cases were found on extreme tip of roots and the remaining cases were on the distal side or mesial side. 2. Except distal simple canal of lower molars, approximately 40% to 50% were located on the very tip of the root. The remaining cases were on distal or mesial surface. 3. On lower distal simple canal, about 51% of cases made its exit on distal side. The remaining cases located on the tip end or mesial side.

• 대한미생물학회지
• /
• 제11권1호
• /
• pp.23-26
• /
• 1976

1975年度 1년간(年間) 2033주의 장내병원성세균이 각 시, 도, 위생시험소 및 종합병원등에서 수집되어 검사대상이 되었으며 16주의 전형적인 이질균을 동정확인하였기에 미생물학적 성상을 보고하는 바이다. 수집된 지역적분포 사항은 Table 1과 같고 3 group으로, 6종류의 serotrpe으로 확인되었다. 생물학적 성상실험들은 미국 Center for Disease Control에서 발표된것과 비슷하였다. 우리나라에서 흔히 상용될 수 있는 항생제에 대한 감수성 검사를 실시하였으며 그 반응의 Pattern은 표3(Table 3)에서 보시는바와 같고 이 결과는 예년과 마찬가지로 Ericsson씨 법에 의해 관찰된 것이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.253-264
• /
• 2005

풍력발전시스템은 제품에 대한 실증이 반드시 현장에서 이루어져야 하는 특성을 가지고 있으며 향후 국내실정에 적합한 풍력발전시스템의 개발과 보급을 위해서도 실증연구는 선행조건으로 볼 수 있다. 따라서 국제 규격에 합당한 풍력발전 성능평가와 현장 실증연구를 수행할 수 있는 실증단지를 국내에 조성하는 것이 매우 시급한 실정으로, 기초적인 자원분석과 주변환경평가 등을 거치면서 기본적인 실증단지 후보지들을 비교하여 최종 후보지로 선정된 전북 새만금지역, 병곡 영해 평야지구, 제주 동부해안지역 월정지구, 서부 해안지역 월령지구에 대하여 부지의 IEC 규격 적합성 검토, 인프라구축에 대한 적정성 검토, 주변 발전단지 조성가능성 및 발전사업에 대한 연계성 검토, 육해상 실증단지 구축 동일지 역 가능성 검토, 교육과 홍보에 대한 접근성 및 공사에 대한 접근성 검토, 부지 확장 및 향후 실증단지 운영과 관련하여 지자체와의 연계성 검토를 하였다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.31-34
• /
• 2004

This research proposes the lateral transshipment policy that can deal efficiently with stockout in the two-echelon distribution network in supply chain. The lateral transshipment policy can be expected for retailers to response the change of customers' demands efficiently. Because of various factors, such as demand fluctuation, replenishment quantity, lead time, and so on, it is very difficult to decide optimal lateral transshipment time and quantity. We suggest the new lateral transshipment policy based on the service level in this research. The efficiency of this policy is proved by simulation experiments.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.643-650
• /
• 2005

The object of this study is the development of a measuring framework for supply chain flexibility. Prior to treat supply chain flexibility, time flexibility, quantity flexibility, and cash-flow flexibility for each company are newly suggested. Especially, all developed measures can deal with the monetary point of view through various cost functions. Then weights of time flexibility, quantity flexibility, cash-flow flexibility are determined to find the effect of the level of flexibility in the supply chain. This is based on the relationship between the ratio of profit to revenue and value of three developed flexibility measures. To find the level of weight for each flexibility measure, neural network theory is used. Then the forecasting of the ratio of profit to revenue for all companies in the next period can be available. Therefore, all companies in the supply chain can control their operating processes to improve flexibility.

• 한국경영과학회지
• /
• 제24권2호
• /
• pp.17-29
• /
• 1999

The manufacturing systems have to cope with the circumstance that the requirements of customers are changed abruptly and the life cycle of product becomes short. In this paper, to develop the efficient control and operation of autonomous, distributed machining systems the concept of Holonic Manufacturing System is adopted and methods for the control and operation of the system are proposed including an evaluation function for the negotiation between holons. And it is applied to scheduling and selection of operations to be worked with consideration of quality. It is expected that the proposed methods may be applied to operate autonomous, distributed machining systems.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1993년도 춘계공동학술대회 발표논문 및 초록집; 계명대학교, 대구; 30 Apr.-1 May 1993
• /
• pp.402-411
• /
• 1993

비디오 주행계의 안정성에 영향을 주는 인자들은 많이 있다. 그중 수직포스트의 경사각은 수직포스트를 지나는 테이프의 주행높이 변동에 영향을 주기 때문에 비디오 데크의 조립상에서 수직포스트의 경사각을 관리하는 것이 비디오 주행계의 안정성을 확보하는데 있어서 필요하다. 특히 비디오 데크의 조립시 수직 포스트의 경사각을 어느정도까지 허용해도 비디오 주행계의 안정성에 영향을 주지 않는지 알때 비디오 데크의 주립시 보다 효과적인 조립공정의 관리가 이루어 질 것으로 사료된다. 본 연구에서는 수직포스트의 경사각에 대한 허용오차를 결정하는 방법과 이에 따르는 다음 포스트들이 세워져야 할 위치를 결정하는 방법을 제시하였는데 이를 위하여 기구학과 통계적인 방법을 사용하였다.