• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2091-2098
• /
• 2010

This paper proposes a hologram data compression scheme that uses the existing image/video compression techniques, in which the existing techniques are modified appropriately to fit to the characteristics of hologram. In this paper we use CGH as the hologram data. The proposed scheme uses the generation characteristics of a CGH to consist of a pre-processing, spatial segmentation of a CGH, frequency-transformation with 2D-DCT (2-dimensional discrete cosine transform), and motion estimation and residual image generation in the frequency-domain. It uses H.264/AVC, the lossless compressor BinHex, and a linear quantizer that we have made. From the experiments the proposed scheme showed the image quality of about 25.4 dB at the compression ratio of 10:1 and about 16.5dB at 90:1 compression ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.810-823
• /
• 2005

The transmission of duplicate packets provides a great loss-resilience without undue time-delay in the video transmission over packet loss networks. But this method generally deteriorates the problem of traffic congestion because of the increased bit-rate required for duplicate transmission. In this paper, we propose an efficient packetization and duplicate transmission of video packets. The proposed method transmits only the video signal with high priority for each video macroblock that is quite small in volume but very important for the reconstruction of the video. The proposed method significantly reduces the required bit-rate for duplicate transmission. An efficient packetization method is also proposed to reduce additional packet overhead which is required for transmitting the duplicate data. The duplicated high priority data of the Previous video slice is transmitted as a Piggyback to the data Packet of the current video slice. It is shown by simulations that the proposed method remarkably improves the packet loss-resilience for video transmission only with small increase of redundant duplicated data for each slice.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.1
• /
• pp.77-82
• /
• 2004

In this paper we present a barcode reader to decode two-dimensional symbology PDF417 and propose a novel method to extract the bar-space Patterns directly from the gray-level barcode image, which employs the location and the distance between extreme points of each row or column of the barcode image. This algerian proves to be very robust from the high convolutional distortion environments such as defocussing and warping, even under badly illuminating condition. If the scanned barcode image is a result of the convolution of a Gaussian-shaped point spread function with a hi-level image, popular image segmentation methods such as image thresholding can not distinguish between very narrow bar-space patterns. The Proposed algorithm shows improved Performance over current barcode readers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.21-30
• /
• 1990

This paper describes a hardware implementation of the interframe monochrome video CODEC using a MC-CVQ(Motion Compensated and Classified Vector Quantization) algorithm. The specifications of this CODEC are (1) the resolution of image is $128{\times}128$ pixels, and (2) the transmission rates are about 10frames/sec at the 64Kbps channel. In order to design the CODEC under these conditions, it is implemented by a multiprocessor system composed of MC unit, CVQ nuit and decoder unit, which are controlled by microprogramming technique. And the 3~stage pipelined ALU(Arithmetic and Logic Unit) is adopted to calculate the minimum error distance in the MC unit and CVQ nuit. The realized system shows that the transmission rates are 6-15 frames/sec according to the relative motion of the video signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.69-77
• /
• 2002

Sine digital signal processing for motion pictures requires huge amount of data computation to store, manipulate and transmit, more effective data compression is necessary. Therefore, the ITU-T recommended H.26x as data compression standards for digital motion pictures. The data compression method that eliminates time redundancies by motion estimation using relationship between picture frames has been widely used. Most video conding systems employ block matching algorithm for the motion estimation and compensation, and the algorithm is based on the minimun value of cast functions. Therefore, fast search algorithm rather than full search algorithm is more effective in real time low data rates encodings such as H.26x. In this paper, motion estimation employing the Nearest-Neighbors algorithm is designed to reduce search time using FPGA, coded in VHDL, and simulated and verified using Xilink Foundation.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.278-288
• /
• 2007

We propose the fast full search algorithm that reduces the computational load of the block matching algorithm which is used for a motion estimation in the video coding. Since the conventional spiral search method starts searching at the center of the search window and then moves search point to estimate the motion vector pixel by pixel, it is good for the slow motion picture. However we proposed the efficient motion estimation method which is good for the fast and slow motion picture. Firstly, when finding the initial threshold value, we use the expanded predictor that can approximately calculate minimum threshold value. The proposed algorithm estimates the motion in the new search order after partitioning the search window and adapt the directional search order in the re-divided search window. At the result, we can check that the proposed algorithm reduces the computational load 94% in average compared to the conventional spiral full search algorithm without any loss of image quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1049-1058
• /
• 2009

After the efficiency of H.264 video compression has been announced, it replaced MPEG-2 standard in several applications. So transcoding methods of MPEG-2 to H.264 have been studying because there are variety devices and contents followed by MPEG-2. Although H.264 supported various service such as IPTV, DMB, digital broadcasting etc, but users using MPEG-2 devices cannot accessible to them. This paper propose H.264 to MPEG-2 transcoding for users of MPEG-2 devices without displacement H.264. The proposed method predicted a motion vector for MPEG-2 encoder after it extracted from motion vectors of variable blocks in H.264 to improve processing time. Also it predicted a optimal motion vector using modified boundary matching algorithm after grasped a special character for boundary and background of object. The experimental results from proposed method show a considerable reduction in processing time, as much as 65% averagely, with a small objective quality reduction in PSNR.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.118-125
• /
• 1998

We introduce an adaptive finite state vector quantization using a new side match distortion function. The conventional side match distortion function can make the gray level transition between the block bounddaries as smooth as possible and proper state codebooks in the flat areas where the spatial correlations are high. But it can't make proper codebooks in the edge areas where the spatial correlations are not high. The proposed distortion function adds the variances which represent the image characteristics to the conventional side match distortion function as weighted values. Then it can select better state codebooks than the conventional side match distortion function. Also if it predicts a wrong state, the proposed quantizer can correct the state. As a result, we can obtain the satisfiable image quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.994-1004
• /
• 2000

In this paper, bitstreams are composed of using H.263 for a moving picture coding in the band-limited and error-prone environment such as wireless environment. EREC sub-frames are implemented by applying the proposed EREC algorithm in order to be UEP for the real data parts of implemented bitstreams. Because those are able to do resynchronization with a block unit, propagation of the error can be minimized, and the position of the important bits such as INTRADC and MVD can be known. Class is separated using the position of these important bits, and variable puncturing tables are designed by the class informations and the code rates of turbo codes are differently designed in according to the class. Channel coding used the turbo codes, and an interleaver to be designed in the turbo codes does not eliminate redundancy bits of the important bits in applying variable code rates of EREC sub-frames unit and is always the same at the transmitter and the receiver although being variable frame size. As a result of simulation, UEP with the code rate similar to EEP is obtained a improved result in the side of bit error probability. And the result of applying it to image knows that the subjective and objective quality have been improved by the protection of important bits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1424-1435
• /
• 2000

A bit-rate controller that can achieve a constant bit rate when coding object-based video sequences is an important part to achieve an adaptation to bit-rate constraints, desired video quality, distribution of bits among objects, relationship between texture and shape coding, and determination of frame skip or not. Therefore we design content-based bit rate controller which will be used for relevant bit-rate control. The implementation is an extension of MPEG-4 rate control algorithm which employs a quadratic rate-quantizer model. The importance of different objects in a video is analyzed and segmented into a number of VOPs which are adaptively bit-allocated using the object-based modelling. Some test sequences are observed by a number of non-experts and interests in each object are analysed. The initial total target bit-rate for all objects is obtained by using the proposed technique. Then the total target bits are jointly analyzed for preventing from overflow or underflow of the buffer fullness. The target bits are distributed to each object in view of its importance, not only of statistical analysis such as motion vector magnitude, size of object shape, and coding distortion of previous frame. The scheme is compared with the rate controller adopted by the MPEG-4 VM8 video coder by representing their statistics and performance.