• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.809-816
• /
• 2014

Ocean Color products have been used to understand marine ecosystem. In high latitude region, ice melting optically influences the ocean color products. In this study, we assessed optical properties in fjord around Svalbard Arctic sea, and estimated distribution of chlorophyll-a and suspended sediment by using high resolution satellite data, Landsat-8 Operational Land Imager (OLI). To estimate chlorophyll-a and suspended sediment concentrations, various regression models were tested with different band ratio. The regression models were not shown high correlation because of temporal difference between satellite data and in-situ data. However, model-derived distribution of ocean color products from OLI showed a possibility that fjord and coastal areas around Arctic Sea can be monitored with high resolution satellite data. To understand climate change pattern around Arctic Sea, we need to understand ice meting influences on marine ecosystem change. Results of this study will be used to high resolution monitoring of ice melting and its influences on the marine ecosystem change at high latitude. KOPRI (Korea Polar Research Institute) has been operated the Dasan station on Svalbard since 2002, and study was conducted using Arctic station.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.487-501
• /
• 2020

As a viable option for retrieval of LST (Land Surface Temperature), this paper presents a DNN (Deep Neural Network) based approach using 148 Landsat 8 images for South Korea. Because the brightness temperature and emissivity for the band 10 (approx. 11-㎛ wavelength) of Landsat 8 are derived by combining physics-based equations and empirical coefficients, they include uncertainties according to regional conditions such as meteorology, climate, topography, and vegetation. To overcome this, we used several land surface variables such as NDVI (Normalized Difference Vegetation Index), land cover types, topographic factors (elevation, slope, aspect, and ruggedness) as well as the T₀ calculated from the brightness temperature and emissivity. We optimized four seasonal DNN models using the input variables and in-situ observations from ASOS (Automated Synoptic Observing System) to retrieve the LST, which is an advanced approach when compared with the existing method of the bias correction using a linear equation. The validation statistics from the 1,728 matchups during 2013-2019 showed a good performance of the CC=0.910~0.917 and RMSE=3.245~3.365℃, especially for spring and fall. Also, our DNN models produced a stable LST for all types of land cover. A future work using big data from Landsat 5/7/8 with additional land surface variables will be necessary for a more reliable retrieval of LST for high-resolution satellite images.

• Journal of KIISE:Software and Applications
• /
• v.35 no.12
• /
• pp.780-788
• /
• 2008

Modeling hand poses and tracking its movement are one of the challenging problems in computer vision. There are two typical approaches for the reconstruction of hand poses in 3D, depending on the number of cameras from which images are captured. One is to capture images from multiple cameras or a stereo camera. The other is to capture images from a single camera. The former approach is relatively limited, because of the environmental constraints for setting up multiple cameras. In this paper we propose a method of reconstructing 3D hand poses from a 2D input image sequence captured from a single camera by means of Belief Propagation in a graphical model and recognizing a finger clicking motion using a hidden Markov model. We define a graphical model with hidden nodes representing joints of a hand, and observable nodes with the features extracted from a 2D input image sequence. To track hand poses in 3D, we use a Belief Propagation algorithm, which provides a robust and unified framework for inference in a graphical model. From the estimated 3D hand pose we extract the information for each finger's motion, which is then fed into a hidden Markov model. To recognize natural finger actions, we consider the movements of all the fingers to recognize a single finger's action. We applied the proposed method to a virtual keypad system and the result showed a high recognition rate of 94.66% with 300 test data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.77-87
• /
• 2018

Traffic Density is the most important of the three primary macroscopic traffic stream parameters, because it is most directly related to traffic demand(Traffic Engineering, 2004). It is defined as the number of existing vehicles within a given distance at a certain time. However, due to weather, road conditions, and cost issues, collecting density directly on the field is difficult. This makes studies of density less actively than those of traffic volume or velocity. For these reasons, there is insufficient attempts on divers collecting methods or researches on the accuracy of measured values. In this paper, we used the 'Density Measuring System' based on the synthesise technology of several camera images as a method to measure density. The collected density value by the 'Density Mesuring System' is selected as the true value based on the density define, and this value was compared with the density calculated by the traditional measurement methods. As a result of the comparison, the density value using the fundamental equation method is the closest to the true value as RMSE shows 1.8 to 2.5. In addition, we investigated some issues that can be overlooked easily such as the collecting interval to be considered on collecting density directly by calculating the moment density and the average density. Despite the actual traffic situation of the experiment site is LOS B, it is difficult to judge the real traffic situation because the moment density values per second are observed max 16.0 (veh/km) to min 2.0 (veh/km). However, the average density measured for 15 minutes at 30-second intervals was 8.3-7.9 (veh/km) and it indicates precisely LOS B.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.274-279
• /
• 2003

위성영상을 이용한 새만금 지역의 DEM생성을 위하여 waterline method를 사용하였으며, 총 13개의 Landsat thematic mapper (TM) 위성영상 자료를 이용하여 1991년과 2000년 기준의 DEM을 생성하였다. 현장 수준측량 자료를 이용하여 생성된 DEM의 정밀도 검증을 실시하였으며, 2002년 3월에 100m 간격으로 측정된 실측자료를 이용하였다. 해안선 추출은 density slicing 방법을 사용하였으며, 사용된 밴드는 육지의 경계를 구분하는데 많이 쓰이는 밴드 4번, 5번 및 6번 밴드를 선택적으로 사용하였다. 절대고도 값의 대입을 위하여 waterline 추출에 사용된 위성영상의 획득 시간에 대해 해양조사원의 10분 간격 실측 조위를 사용하였으며, 추출된 13개 waterline의 최저 조위는 58cm 이고 최고 조위는 537cm 이다. 추출된 해안선에 수준측량 자료를 이용하여 검증한 결과 RMS 오차 9.91 cm, 표준편차 9.78 cm의 정밀도를 갖는 2000년도 DEM을 생성하였다. 새만금 지역의 waterline 추출 과정에서 만경강과 동진강 하구 지역은 강에 의한 에너지의 유입, 유출로 인한 변화가 심하여 두 지역을 DEM 생성에서 제외하였다. 이렇게 생성된 과거(19991년도) DEM과 현재(2000년도) DEM을 이용한 지형변화 비교는 두DEM 차이로 9년간의 새만금 조간대 변화를 계산하였다. 군산공항지역의 지형변화는 거의 없는 것으로 나타났으며, 새만금 방조제가 건설된 이후 개화도 주변지역의 변화가 가장 두드러진 지형적 변화로서 방조제 입ㆍ출구 지역은 빠른 유속에 의해서 과거에 비해 침식이 우세하며, 방조제에서 육지로 갈수록 퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model,

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.253-256
• /
• 2002

거제도는 남쪽에서 두 번째로 큰 섬으로써 총면적은 399.96$\textrm{km}^2$이며 총면적의 71.85%가 임야로 이루어져 있고 하천이 짧으며 유역면적이 좁은 관계로 지하수의 함양이 어려우며 해안으로 유출되는 지하수가 상당량이 될 것으로 사료되었다. 따라서 유출지하수의 특성을 연구하여 지하수의 유출가능성이 높은 지역을 찾을 수 있도록 여러 가지 분석을 통하여 알아보았다. 이를 위하여 기본적으로 기온, 강수량 등의 기상자료와 지하수온도, 지하수위등의 수문자료 및 해수표면온도 등의 해양관측자료를 이용하였으며, 해수와 지하수의 온도차가 많은 달의 Lanset 7 ETM+ 인공위성 영상자료와 NOAA 인공영상자료를 이용하여 온도자료를 비교하고, 각개 영사의 열분포도를 분석함으로써 유출지하수의 가능성이 높은 지역을 추출하였다. 추출한 지역에서 인구밀집지역, 공단지역, 기 공급지역을 제외하였으며, 수문지질학 적으로 유리한 지역을 선정하고, 평균해수분포차가 큰 지역을 추출함으로써 이후에 이루어질 현장조사시에 접근이 용이하도록 하였다. 연구결과 거제도 일대의 해안유출지하수 가능지점은 10개소 이상이며 자연적, 사회학석인 여건을 고려한다면 지하수개발가능 지역은 6개 정도로 예상된다. 또한 해수면의 온도와 지하수의 온도가 차이가 클 때는11~13$^{\circ}C$의 분포를 보이고 있어, 이후 이와 같은 연구에 충분히 활용할 수 있을 것이며, 해상도가 높은 자료와 연계하면 보다 정확한 자료의 추출이 가능해 앞으로의 국내에 활용되지 못한 수자원 개발에도 많은 도움이 될 것으로 판단된다.하게도 유기물과의 친화력이 높은 것으로 알려진 Cu 역시 F1과 F2에 대하여 높은 함량을 나타내어 오염원으로부터의 Cu의 확산을 지시하였다. 외국에 비하여, 그동안 국내에서는 사격장 주변의 자연환경변화에 관하여 연구된 결과가 거의 전무하였다. 본 연구 결과는, 이와 유사한 사격장 주변 환경에서의 중금속 분포와 거동 특성에 대하여 종합적인 모니터링(즉, 체계적인 환경지구화학적 조사ㆍ연구)이 시급함을 시사해 주고 있다.할 수 있었다.연구지역을 대상으로 추정한 함양율은 지하수이용에 따른 지하수위하강에 대한 보정을 할 필요가 있으며 지하수이용실태조사를 추가로 하여 그 이용량만큼을 지하수함양량에 더하여야 할것이다.의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.60-69
• /
• 2020

Purpose: Cavity growth process monitoring is to periodically monitor changes in common size and topography for general and observational grades to predict the rate of common growth. The purpose of this study is to establish a systematic cavity management plan by evaluating the general and observational class community in a non-destructive method. Method: Using GPR exploration equipment, the acquired surface image and the surrounding status image are analyzed in the GPR probe radargram in depth, profile, and cross section of the location. The exact location is selected using the distance and surrounding markings shown on the road surface of the initial detection cavity, and the test cavity is analyzed by calling the radar at the corresponding location. Result: As a result of monitoring tests conducted at a cavity 30 sites of general and observation grade, nine sites have been recovered. Changes in scale were seen in 21 cavity locations, and changes in size and grade occurred in 13 locations. Conclusion: The under road cavity is caused by various causes such as damage to the burial site, poor construction, soil leakage caused by groundwater leakage, waste and ground vibration. Among them, indirect factors could infer the effects of groundwater and localized rainfall.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.199-210
• /
• 2000

We present the results from narrow-band spectrophotometry of Comet Hale-Bopp (C/1995 O1) near perihelion obtained at Sobaeksan Optical Astronomy Observatory 61cm telescope equipped with PM 512 CCD camera(512$\times$512, 0.5"/pixel) and narrow-band filter set for the comet on 19 nights from February 21 to May 1, 1997. We discuss molecular emission band morphology and photometric behavior of Comet Hale-Bopp. The morphology of CN band shows more symmetric light distributions than $C_2$ or $C_3$ bands. On other hand, $C_2$ and $C_3$ band have more compact light distributions than CN band. Similar to wide-band image, molecular band morphology shows spiral structures at the core of the comet. The CN surface brightness variation with changing heliocentric distance shows difference from those of $C_2$ and $C_3$. The brightness, however, of these molecular bands near perihelion shows previously known 7day period light variations.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.85-99
• /
• 2015

TDI CCD sensors are being used for most of the electro-optical camera mounted on the low earth orbit satellite to meet high performance requirements such as SNR and MTF. However, the CMOS sensors which have a lot of implementation advantages over the CCD, are being upgraded to have the TDI function. A few methods for improving the issue of motion blur which is apparent in the CMOS sensor than the CCD sensor, are being introduced. Each pixel can be divided into a few sub-pixels to be read more than once as is the same case with three or four phased CCDs. The fill factor can be reduced intentionally or even a kind of mask can also be implemented at the edge of pixels to reduce the blur. The motion blur can also be reduced in the TDI CMOS sensor by reducing the integration time from the full line scan time. Because the integration time can be controlled easily by the versatile control electronics, one of two performance parameters, MTF and SNR, can be concentrated dynamically depending on the aim of target imaging. MATLAB simulation has been performed and the results are presented in this paper. The goal of the simulation is to compare dynamic MTFs affected by the different methods for reducing the motion blur in the TDI CMOS sensor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.156-162
• /
• 2007

The parallel beam SPECT system acquires projection data by using collimators in conjunction with photon detectors. The projection data of the parallel beam SPECT system is, however, blurred by the point response function of the collimator that is used to define the range of directions where photons can be detected. By increasing the number of parallel holes per unit area in collimator, one can reduce such blurring effect. This approach also, however, has the blurring problem if the distance between the object and the collimator becomes large. In this paper we consider correction methods for artifacts caused by non-circular orbit of parallel beam SPECT with many parallel holes per detector cell. To do so, we model the relationship between the object and its projection data as a linear system, and propose an iterative reconstruction method including artifacts correction. We compute the projector and the backprojector, which are required in iterative method, as a sum of convolutions with distance-dependent point response functions instead of matrix form, where those functions are analytically computed from a single function. By doing so, we dramatically reduce the computation time and memory required for the generation of the projector and the backprojector. We conducted several simulation studies to compare the performance of the proposed method with that of conventional Fourier method. The result shows that the proposed method outperforms Fourier methods objectively and subjectively.