• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.459-468
• /
• 1986

This study was attempted to process low-sodium salt fermented small shrimp as substitutes for traditional high-sodium salt fermented one which has widely been favored and consumed in Korea. Low-salt fermented small shrimp was prepared with $4\%$ sodium chloride and $4\%$ potassium chloride, and various additives such as $0.5\%$ lactic acid, $6\%$ sorbitol and $4\%$ ethylalcohol extract of red pepper as preservatives and flavor enhancers. And the changes of taste compounds, volatile compounds and fatty acid composition in low-salt fermented small shrimp were analyzed and compared with those of conventional $20\%$ sodium salt fermented one during the fermentation of 120 days at $25{\pm}3^{\circ}C$. The most favorable taste for fermented small shrimp were reached at 60 days of fermentation. Judging from sensory evaluation, little difference of taste was detected between the low-salt fermented small shrimp and high-sodium salt fermented one. The principal taste compounds in fermented small shrimp were free amino acids, and betaine and nucleotides and their related compounds played an assistant role. The major amino acids in fermented small shrimp were glutamic acid, leucine, proline, glycine, lysine and aspartic acid. The major fatty acids in fermented small shrimp samples were 16:0, 20:5, 22:6, 16:1 and 18:1, and unsaturated fatty acids decreased slightly while saturated fatty acids increased during fermentation. At 60 days of fermentation 8 kinds of volatile fatty acids (acetic acid, propionic acid, isobutyric acid, butyric acid, isovaleric acid, valeric acid, isocarproic acid, carproic acid), 6 kinds of carbonyl compounds (ethanal, propanal, 2-methylpropanal, 3-methylbutanal, pentanal, 2-methylpentanal), and 3 kinds of volatile amines (methylamine, trimethylamine, isopropylamine) were identified.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.87-94
• /
• 1979

In order to study the water pollution in Suyeong Bay, Busan, some chemical constituents were determined at 25 stations in the neap tides on 9 Aug. 1977 and spring tides on 30 Aug. 1977. Range and mean values of the constituents in the spring tides are as follows: $pH\;6.54\~8.06,\;7.54;$ electrical conductivity $0.413\~0.481\times10^5\;\mu\mho/cm,\;0.467\times10^5\;\mu\mho/cm;\;transparency\;0.2\~5.5m,\;2.2m;$ turbidity $1\~60ppm$, 14ppm, chlorosity $15.20\~18.11g/\ell,\;17.67g/\ell;$ fluoride ion $0.94\~1.03ppm$, 0.99ppm; dissolved oxygen $0.17\~7.60ppm$, 4.77ppm; sulfide $0\~0.46ppm$, 0.07ppm; chemical oxygen demand $1.20\~40.74ppm$, 6.11ppm; ammonia-nitrogen $0.060\~0.520ppm$, 0.180ppm; nitrite-nitrogen $0.001\~0.026ppm$, 0.009ppm; nitrate-nitrogen $0\~0.037ppm$, 0.014ppm; phosphate-phosphorus $0.002\~0.261ppm$, 0.050ppm; n-Hexane soluble $0.5\~5.4ppm$, 2.1ppm ; iron $1.0\~104.11\;ppb$, 24.15ppb ; copper $0\~27.45ppb$, 4.19ppb; lead $0\~2.50ppb$, 0.92ppb; zinc $0\~5.15ppb$, 1.47ppb ; cadmium $0\~0.26ppb$, 0.04ppb; and mercury $0.05\~0.37ppb$, 0.11ppb respectively. The variations of the contents of the chemical constituents in the spring tides were larger than in the neap tides. The contents of COD, sulfide, nutrient salts and heavy metals were the highest in the estuary of Suyeong River, and decreased in order of off Kwangan-Ri region, outer Bay and off Haeun-Dae region. The water quality in Suyeong Bay was particularly shown that the concentrations of COO, iron, copper and mercury were higher than those of other coastal aseas and deficiency in dissolved oxygen was observed in some parte of Suyeong Bay. In consideration of the relationship between the chlorosity and the concentrations of nutrient salts, COD and total heavy metals, water pollution of this area is considered due to the inflow of Suyeong River which was extremely polluted by sewage and industrial wastewaters.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.810-820
• /
• 2012

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) contents in marine sediment and edible fish (4 species) from the estuary near the Yongho wharf in Busan were determined to assess their presence and their potential health risk to the local population through fish consumption was also assessed. Levels of ${\Sigma}PCBs$ and ${\Sigma}DDTs$ in marine sediment were 3.22~197.65 and 1.77~20.27 ng/g dw, respectively. HCHs and endosulfan sulfate concentrations in bottom sediment were 1.42~6.08, 0.56~13.89 ng/g dw, respectively. The bottom sediment in the offshore of the Yongho wharf may be characterized as semi-polluted status with potential adverse marine biological effects in terms of sediment quality guidelines of US NOAA. The mean concentrations of ${\Sigma}PCBs$ in the tissues of olive flounder (Paralichthys olivaceus), Korean rockfish (Sebastes schlegelii), file fish (Stephanolepis cirrhifer) and abbysal searobin (Lepidotrigla abyssalis) were 67.37, 10.20, 48.26, 22.81 ng/g lw, respectively. DDTs and HCHs were also detected in all fish samples. Lifetime cancer risk and target hazard quotient to local residents due to those fish consumption were found to pose negligible cancer and non-cancer risk.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.3
• /
• pp.139-148
• /
• 2012

The short-term variation of salinity and temperature in a dyked estuarine environment is mainly controlled by the freshwater discharge from the dyke. We examined the distribution of salinity and temperature by the freshwater discharge in the Yeongsan River estuary using the CTD data obtained from 8 stations through three surveys in June (weak discharge) and August (intensive discharge), 2010. During the weak discharge in June, the surface salinity showed 30-32.5 psu and its horizontal gradient was relatively high around Goha-do (0.25~0.32 psu/km). On the other hand, the salinity of the bottom layer was almost constant in the range of 33 psu. Water temperature ranged $19{\sim}21^{\circ}C$ and displayed higher gradient in north-south direction than the gradient of east-west direction. During the intensive freshwater discharge on August 12, the salinity dropped to 9~26 psu. The maximum horizontal gradient of surface salinity reached 3.8 psu/km in the north of Goha-do where the strong salinity front was formed, and the horizontal salinity gradient of bottom layer was 0.28 psu/km. The horizontal gradient of water temperature was $-0.45^{\circ}C/km$ in the surface and $-0.12^{\circ}C/km$ in the bottom with high surface temperature near the dyke and decreasing gradually to the river mouth. After 3 days of the intensive discharge ($3^{rd}$ survey), the surface salinity increased to 22~26 psu. However, there still existed relatively high horizontal gradient around Goha-do. In the mean time, the bottom salinity decreased to 26.5~27.5 psu, but its gradient was not big as much as the surface gradient. According to time series of CTD profile near the dyke, the discharged fresh water jetted down temporarily and then recovered gradually with the recovering speed of 0.4 m/hour for the discharge case of $13{\times}10^6$ ton. Due to the combined effects of freshwater discharge and surface heating during the summer of 2010, the Yeongsan estuary, in general, underwent intensified vertical stratification, which in turn caused the inhibition of vertical mixing, especially inside area of estuary. Based on the spatial distribution of salinity and temperature, the Yeongsan estuary can be divided into three regions: the Goha-do area with strong horizontal gradient of salinity and temperature, inner estuary from Goha-do to the dyke with low salinity, and outer estuary from Goha-do to the coasts with relatively high salinity.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.250-259
• /
• 1982

The Larch was known unsuitable species for the wood cement board owing to its some inhibitory substances. Therefore this research was carried out to evaluate the effect of pretreatments and chemical additives on the properties of woodflake cement board from Japanese larch (Larix leptolepis) grown in Korea. In order to improve the board qualities, the woodflakes were treated by cold water or dilute NaOH solutions(0.1, 0.5, and 2.0%), and also some chemicals($CaCl_2$, $Al_2Cl_3$ and $Na_2SiO_4$) added to the wood cement mixture. The results obtained are summarized as follow; 1. The wood cement boards from the woodflake treated with 0.1% NaOH showed remarkable higher bending strengths and internal bonding strengths than those from the flake pretreated with cold water. 2. The bending strengths showed over $60kg/cm^2$, i.e. the standard strength of JIS A-5417, with pretreatments of NaOH over 0.1% and additive of $CaCl_2$ 3.0%. The maximum strengths showed at about 0.5 of every additives. 3. Addition of $CaCl_2$ and $Al_2Cl_3$, in the case of pretreated wood with NaOH above 0.1%, had effects on increasing the internal bonding strengths of sample boards. 4. The thickness swellings became decreasing along with the increasing NaOH pretreatment concentntration. 5. The equilibrium conditions of the sample boards pretreated with NaOH over 0.1% and added with $Al_2Cl_3$ and $CaCl_2$ were maintained at 9.0~10.5% moisture contents. 6. The specific gravity of the samples showed close relationships with strength properties.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.447-456
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.4
• /
• pp.326-335
• /
• 1988

In order to increase the availability of filefish scrap, the ordinary and low salt sauce were prepared, and identified their taste compounds in their products. To process the filefish scrap sauce, chopped filefish scrap was mixed with koji, 25% brine, slat and glucose (25.0 : 65.0 : 12.5 : 7.0, w/w) and fermented at $25{\pm}4^{\circ}C$ for 120 days. The same process was also carried out to process the low salt sauce adding sorbitol, lactic acid and ethyl alcohol (7.0 : 0.7 : 9.0. w/w) instead of salt. While amino nitrogen and volatile basic nitrogen(VBN) of products were decreased, pH and reducing sugar were increased all alone the fermentation period. The major free amino acids of products at final stage of fermentation were glutamic acid, alanine, leucine, lysine and aspartic acid. And the contents of total amino acid in the ordinary and low salt sauce were 4126.6(mg/100m1 sauce), 4519.5(mg/100m1 sauce) after fermentation. Hypoxanthine was revealed as the major constituent among nucleotides and their related compounds through fermentation. Free amino acid-N in the filefish scrap sauces were from 56.3%(ordinary) to 60.7%(low salted) of extractive nitrogen. From the sensory evaluation, the quality of products from filefish scrap sauce were almost equal to sold soy sauce on the market.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1344-1349
• /
• 2005

The aim of this study was to evaluate the effects of Welsh onion administration on $CCl_4$-induced hepatic injury in rats. The increasing rate of the body and organ weight was not significantly different by the ad-ministration of the Welsh onion. Welsh onion (2, 4, $10\%$ w/w) was given for 4 weeks with the injections of $CCl_4$. Total serum lipid was significantly decreased in all treatment groups compared to $CCl_4$ only treatment group (p<0.05). The Welsh onion from winter season was more protective effect by lowering the serum levels of transminase (SGOT and SGPT) compared with others, the levels of transminase - phosphatase (ALP) in serum. The Welsh onion from winter at a dose of $4\%,\;10\%$ (w/w) showed significantly hepatoprotective activity which was comparable to that $CCl_4$-induced hepatic damage. Histological evaluation showed that Welsh onion partially prevented $CCl_4$-induced inflammation, necrosis and vacuolation. Pretreatment of Welsh onion reduced extent of the necrosis found 24 hr after the intraperitoneal administration of $CCl_4$. The present study shows the liver protective action of the Welsh onion against experimentally induced liver damage in rats. This suggests that the Welsh onion may be used as an effective hepatoprotective agent.