• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.229-229
• /
• 1994

선택성이 높고 뛰어난 약효를 지닌 항 바이러스제의 개발은 신약개발의 중요한 영역중에 하나이다. 현재 AIDS 치료제로 사용되고 AZT를 비롯하여 항virus 효과를 나타내는 약물의 대부분은 구조적으로 nucleoside계에 속하는 화합물로서 수 많은 약리학적 연구 및 합성 화학적 연구가 이루어져 왔다. 특히 합성 화학적 측면에서 이들 화합물의 합성은 크게 두가지로 나누어지는데 그것은 sugar 부위의 변형을 통한 방법과 염기 부위의 변형을 통한 방법에 의해 새로운 항 바이러스제를 개발하는 것이다. 최근의 연구 동향에 있어서 주목할 만한 변화의 하나는 sugar 부위의 구조적 변형을 시도하는데 있어서 종래의 5원환 형태에서 환이 개열된 형태의 acyclic nucleoside에 대한 연구가 이루어져 좋은 효과를 거두고 인다는 사실이다. Acyclovir, Ganciclovir등 의 개발이 그것이다. 본 연구에서는 종래의 acyclic nucleoside가 ribose sugar의 2'번 및 3'번 탄소를 제거한 acyclic ether 형태로 되어있는 것과는 다르게 ether 부위의 산소를 탄소 치환한 carbo-acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside의 side chain의 conformation이 항 바이러스 작용을 나타내는데 필수 불가결한 점을 감안할때, carbo-acyclic nucleoside계 화합물은 보다 다양하게 변형될 수 있는 장점을 가지고 있다. 이러한 관점에서 side chain의 2'번 및 3'번 탄소는 side chain의 conformation을 좌우하는 결정적 요인으로 작용할 것으로 판단된다. 따라서 본 연구에서는 이들 탄소를 중심으로한 분자수식을 시도하기로 하고 bioisosterism을 이용하여 3'위치의 수소를 fluoride로 치환한 화합물을 설계하여 합성을 시도하였다.silyl group-5'-무치환 화합물을 tosyl, azido화 한다음 desilylation하여 얻었다. 목적하는(1) 화합물의 diasteromer 인 2',3'-dihydroxy-5'-무치환 유도체(3)는 (4)화합물 합성시 얻은 hemiactal을 key intermediate로 하여 TsNHNH$_2$, NaB(CN)H$_3$ 및 NaOAc로 처리하므로서 얻을수 있었다. 이들 화합물들의 각종 DNA 및 RNA virus에 대한 항 바이러스작용을 검토한 결과 현저한 항 바이러스 작용을 나타내지 않았다.분화유도 활성을 나타내어 항종양제로의 개발에 많은 흥미가 기대된다.기대된다.oxylic acid (compound 10)를 합성하였다.10^{－7}$ M)에 의한 단백인산화에 대하여는 더 미약한 억제-효과를 나타내었다. 이상의 결과는 PDE-1과 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같은 중금속이온의 흡착실험은 특히 해수중의 금속이온의 회수연구에도

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1995.04a
• /
• pp.130-130
• /
• 1995

AM, SM 및 ASA는 수용액중에서 겉보기 1차반응에 따라 분해되었으며 보존온도가 높을수록 분해가 촉진되는 온도 의존성을 나타내었다. AM의 분해경로는 pH 1.22 및 pH 7.0 이상에서는 AM$\longrightarrow$ SM $\longrightarrow$ SA의 경로로 주로 분해되었으며 pH 2.01 - 6.08의 범위에서는 AM $\longrightarrow$ASA$\longrightarrow$SA의 경로로 분해되는 양상을 보였다. 또 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 AM, SM 및 ASA의 최대안정 pH는 각각 4.0, 3.0, 2.0 부근이 있고 이 조건에서의 분해 반감기는 114, 168, 113 hr로 나타났다. 전체적으로 보면 pH 2.0 이하에서는 ASA가 AM 보다 약간 안정한 편이나 pH 2.0-8.0 사이에서는 AM의 분해속도가 ASA보다 현저히 낮았다. 또 AM은 pH 7.0 이상에서, SM은 pH 6.0 이상에서, ASA는 9.0 이상에서 특수염기촉매반응에 따라 분해가 이루어지는 것을 알 수 있었다. 이온강도($\mu$)의 영향으로는 pH 7.0에서 이온강도가 0.115에서 1.0으로 증가할수록 $\mu$$^{1}$2/에 대해 AM의 분해속도정수가 직선적으로 완만하게 감소되었다. 또 완충수용액 중 AM의 가수분해 억제효과를 검토하기 위해 시클로덱스트린류를 첨가하였을 때, $\beta$-시클로덱스트린과 히드록시프로필기-$\beta$-시클로덱스트린은 AM의 분해를 각각 1.6배 및 1.1배 촉진시켜 촉매적으로 작용하였으며 디메칠-$\beta$-시클로덱스트린은 약 3.2배 분해속도를 억제시켜 안정화제로 작용하였다.Zn^{2+}$, soybean trypsin inhibtor에 의해 25～50% 정도, serine proteinase inhibitor인 phenylmethylsulfonyl floride에 의해 80%정도 활성이 억제되는 특성이 있음을 규명하였다.면역환성 (immunoreactivity)이 나타났고 pyramidal cell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.25-39
• /
• 2003

This study proposed a new electrolytic reduction technology that is based on the integration of simultaneous uranium oxide metallization and Li$_2$O electrowinning. In this electrolytic reduction reaction, electrolytically reduced Li deposits on cathode and simultaneously reacts with uranium oxides to produce uranium metal showing more than 99% conversion. For the verification of process feasibility, the experiments to obtain basic data on the metallization of uranium oxide, investigation of reaction mechanism, the characteristics of closed recycle of Li$_2$O and mass transfer were carried out. This evolutionary electrolytic reduction technology would give benefits over the conventional Li-reduction process improving economic viability such as: avoidance of handling of chemically active Li-LiCl molten salt increase of metallization yield, and simplification of process.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.211-214
• /
• 2005

Recently, Deterioration of the concrete sewer concrete structures by biochemical corrosion has been issued and a development of the inhibition system of corrosion that has been demanded. The sulfuric acid may react with the hardened cement paste and originate expansive products which can induce swelling and breakless of concrete. Also, a sulphuric acid reacts with calcium hydroxide to from $CaSO_4\;\cdot\;2H_2O$. This reaction accounts for consumption of the calcium hydroxide present in hardened cement paste. In this study, To present from biochemical corrosion of the sewer repair mortar that was spread with liquefied antibiotic and then its experimental properties were experimentally investigated and to estimate the effect of absorbed condition of restorative mortar, the number of coating times and coating contents with antibiotic on the durability properties of restorative mortar spread with antibiotics. Also, testing items such as carbonation depth, choloride ion penetration depth and chemical resistance was tested to estimate the durability properties in third study. In results, the novellus bacillus inhabiting in sewer concrete structures was restrained by antibiotics developed in this study. And carbonation depth, choloride ion penetration depth and chemical resistance of restorative mortar spread with antibiotics was superior to that of plain mortar.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.28-32
• /
• 2019

In nuclear power plant operation and spent fuel canisters, it is necessary to provide a sound technical basis for the safety and security of long-term operation and storage respectively. Recently, the peening technology is being discussed and the technology will be adopted to ASME Section III, Division 1, Subsection NX (2019 Edition). The peening is prohibited in current edition, but it will be approved in 2019 Edition and adopted. However, Surface stress improvement techniques such as the peening is used to mitigate SCC susceptible in operating nuclear plants. Although the peening will be approved to ASME CODE, there are no performance criteria listed in the 2019 edition. The Korean International Working Group (KIWG) formed a new Task Group named "Advanced Surface Stress Improved Technology". The task group will develop a CODE CASE to address PWSCC(Primary Water Stress Corrosion Cracking) and CISCC(Chloride Induced Stress Corrosion Cracking) for new ASME Section III components. TG-ASSIT was started to make peening performance criteria for ASME Section III (new fabrication) applications. The objective of TG-ASSIT is to gain consensus among the relevant Code groups that requirements/mitigation have been met.

• Journal of the Korean Chemical Society
• /
• v.41 no.4
• /
• pp.180-185
• /
• 1997

Zinc, cadmium, lead and copper were simultaneously determined by depositing metals at - 1.200 V vs. a Ag/AgCl(sat. KCl) reference electrode for 150 seconds on a hanging mercury drop electrode(HMDE) or a thin mercury film electrode(TMFE), followed by scanning towards anodic direction using differential pulse voltammetric(DPASV) and square wave voltammetric(SWASV) techniques. The linear calibration curves were obtained for four metal ions simultaneously determined by DPASV with a HMDE in the concentration range between 20 and 100 ppb. However, the linear calibration plots were obtained only for $Cd^{2+}$ and $Pb^{2+}$ in the simultaneous determinations with a TMFE in the concentration range up to 100 ppb using DPASV and up to 10 ppb using SWASV. DPASV with a TMFE was about 15 times more sensitive than DPASV with a HMDE for simultaneous determinations of $Cd^{2+}$ and $Pb^{2+}$. SWASV was about 5 times more sensitive than DPASV at a TMFE. Concentrations of zinc in seven different sediment samples determined by DPASV with a HMDE and inductively coupled plasma-mass spectrometry were compared, resulting with an excellent correlation coefficient of 0.9993 and with no significant difference between two methods after t-test.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.461-470
• /
• 1994

Sorption experiments of $^{60}$ Co, $^{85}$ Sr. and $^{137}$ Cs onto sandstone particles in a batch were carried out to investigate the migration mobility. Sorption kinetics and reversibility as well as sorption mechanisms were examined. Sorption reaction occurred mostly within 10 hours on the outer surface of the sandstone particle but diffusion into the inner surface of the mineral has still occurred after that time. In order to distinguish sorption types of radionuclides, a sequential chemical extraction was introduced. The sorbed radionuclides were then extracted by applying different solutions of synthetic groundwater, CaCl$_2$, KCl and KOX-HA Especially KCl is adopted to extract the ion-exchanged cesium. Sorption types considered are reversible sorption under groundwater condition, ion exchange, association with ferro-manganese oxides or oxyhydroxides, and irreversible fixation. Strontium sorbs onto the sandstone surface mainly by fast and reversible ion exchange reaction. However, cobalt and cesium do not sorb by simple process. The main sorptive binding of cobalt was the association with ferro-manganese oxides and the secondary one was irreversible fixation. Diffusion into the lattice of minerals controlled the sorption rate of cobalt The main sorptin type of cesium was irreversible fixation, while ion exchange reaction was the secondary importance. Hence the oreder of migration mobility for the three radionuclides was Sr$^{2＋}$ ＞ Co$^{2＋}$ ＞ Cs$^{＋}$ in the sandstones.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2006

The effects of electrolytes were investigated on the removal efficiency when several different electrolytes were used to change the electrode reaction in an electrokinetic (EK)-Fenton process to remediate phenanthrene-contaminated soil. Electrical potential gradient decreased initially due to the ion entrance into soil and then increased due to the ion extraction from soil under the electric field. Accumulated electroosmotic flow was $NaCl>KH_2PO_4>MgSO_4$ at the same concentration because the ionic strength of $MgSO_4$ was the highest and $Mg(OH)_2$ formed near the cathode reservoir plugged up soil pore to inhibit water flow. When hydrogen peroxide was contained in electrolyte solution, removal efficiency increased by Fenton reaction. When NaCl was used as an electrolyte compound, chlorine ($Cl_2$) was generated at the anode and dissolved to form hypochlorous acid (HClO), which increased phenanthrene removal. Therefore, the electrode reaction of electrolyte in the anode reservoir as well as its transport into soil should be considered to improve removal efficiency of EK-Fenton process.

• 한국해양학회지
• /
• v.10 no.1
• /
• pp.33-40
• /
• 1975

The ion exchange sorption and elution behavior of toxic heavy metal ions, such as Hg(II) and Zn(II), have been studied in aqueous and methanolic media of MCl (M: K, Na and NH$\_$4/). The ion exchange resins studied are Dowex 1-X8, Cl$\^$-/ (50-100 or 200-400 mesh) and Dowex 50W-X8, M$\^$+/ form (M: K, Na, NH$\_$4/ and H). the sorption and elution of metal ion on the resin is largely due to the formation of the anionic chlororocomplex of metal ion. The addition of methanol in the medium contributes markedly to the distribution data. In order to apply this work for the treatment of polluted sea water with toxic heavy metal ions, removal experiment of the metal ions from the synthetic sample solution was investigated.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1996

A rapid analytical method based on capillary electrophoresis is described for the determination of trace anions in high-purity chemicals which is used to prevent corrosion demage in nuclear power plants. Separations are carried out at 20kV using trimethylsilane-coated fused-silica capillary ($70cm{\times}50$ or $75{\mu}m$ i.d.) with the electrolyte of 5mM Chromate(pH=8). Detection was achieved using on-column indirect photometry at 254nm. The simultaneous analysis of inorganic anions, chloride, nitrate, sulfate, azide and phosphate was performed using methods of hydrodynamic(>1ppm) and / or electrokinetic(<1ppm) injection. The results of studies on the coexisting anions on analyte ions shows that peak responses of analyte in hydrodynamic injection is constant without effect of coexisting anions, but those of analysis in electrokinetic injection is strongly dependant upon the kind of coexisting anions and its ionic mobility. The analyte enrichment rate, hence peak response, is positive relationship with the resistance of the sample solution. Thus, appropriate measures, such as standard addition or internal standard technique, must be used to account for differences in conductance of standard and sample solutions.