• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.541-548
• /
• 2014

The pickling brine generated from the salting process of kimchi production is difficult to treat biologically due to very high content of salt. When pickling brine is treated and discharged, it cannot satisfy the criteria for effluent water quality in clean areas, while resources such as the salt to be recycled and the industrial water are wasted. However, sterilization by ozone, UV and photocatalyst is expensive installation costs and operating costs when considering the small kimchi manufacturers. Therefore there is a need to develop economical process. The study was conducted on the sterilization efficiency of the pickling brine using electrochemical processing. The electrochemical treatment of organic matters has advantages over conventional methods such as active carbon absorption process, chemical oxidation, and biological treatment because the response speed is faster and it does not require expensive, harmful oxidizing agents. This study were performed to examine the possibility of electrochemical treatment for the efficient processing of pickling brine and evaluated the performance of residual chlorine for the microbial sterilization.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.278-285
• /
• 2019

The experiment was implemented to gain basic data for stable proso millet (Panicum miliaceum L.) production through germination viability and establishment uniformity based on seed refining under seed selection with specific gravity of proso millet seed. Seeds of three proso millet cultivars were carefully selected by adjusting NaCl into 9 levels (1.000, 1.005, 1.010, 1.015, 1.020, 1.025, 1.030, 1.035, 1.04 g·L^-1), and their standard germination rate, seeding quality and field emergence rate were investigated. Proso millets showed heavier thousand seed weight as specific gravity high. In standard germination, all of the 3 cultivars of selected seeding showed at least 91% germination rate. With respect to the 1.040 g·L^-1 selection by specific gravity, 'Hwanggeum' had 98.9%, 'Ibaekchal', 99.4%, and 'Hwangsilchal', 98.9%, recording the highest. Seeding quality was investigated and it was found that, compared with the non-selected seeds, selected seeds had longer plant heights and averaged 2.0, 2.2 and 1.9 cm, respectably. In terms of leaf length, only 'Hwanggeum' and 'Ibaekchal' showed distinctive differences. No significance was found in stem diameter and SPAD. The seeds selected using specific gravity all had longer or heavier average root length, root weight and stem weight. Compared with non-selected seeds, the specific gravity of 1.040 g·L^-1 had longer root lengths of 2.9, 3.0 and 2.9 cm. 1.040 g·L^-1 was also found to have the heaviest root weight, and stem weight. The field emergence viability investigation found significance solely in the mean emergence time (MET) by the cultivar. High significance was found in percent emergence (PE) and emergence rate index (ERI) in the specific gravity for the selection of seeds. All of the three cultivars showed higher PE and ERI as specific gravity selection high. The 1.040 g·L^-1 specific gravity selection had the highest PE of 90.7, 85.3 and 92.8%. For productivity increase based on improved proso millet germination rate and enhanced establishment uniformity, it seems favorable to employ 1.040 g·L^-1 specific gravity selection using salt solution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.668-672
• /
• 2009

상대오염도가 높은 초기유출수에 대한 1차 처리의 화학적인 효율성 증대에 대한 연구는 많이 진행되어온 반면 동수역학적 분석에 관한 연구는 미흡한 실정이다. 본 연구에서는 수처리 시설에 대해서 수리모형 및 수치모의의 결과를 비교 분석하였다. 연구에 사용된 수처리 시설은 내부 격벽(baffle)의 배열에 변화를 주어 흐름제어를 유도하여 초기유출수의 처리 효율에 변화를 줄 수 있도록 시설을 고안하였다. 수리모형 및 수치모의 실험을 통해 구조물 내에 복잡한 난류흐름을 관찰하였고, 주입된 염수의 농도분포 양상을 시간변화에 따라 분석하였다. 수치모의를 위해서 3차원 수치모형 프로그램인 FLOW-3D를 사용하였으며 LES 난류모형과 질량생성(mass source)모형을 적용하여 수처리 시설 내에서의 동수역학적 거동분석 및 오염원(source)의 농도분포를 모의하였다. 실험 결과 수처리 시설의 3차원 난류흐름을 통해 오염원이 지체 및 확산되고 이에 따라 배출되는 농도가 현격하게 차이 냄을 확인하였다. 또한 추후 본 연구에서 제시된 바와 같이 다양한 내부구조에 대한 수치모의 결과를 분석하게 되면 초기 유출수 처리 효율을 증가시킬 수 있는 수처리 시설모형의 최적화 방안을 고려할 수 있을 것이다.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.722-727
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.56mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.5-12
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.5mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.105-106
• /
• 2009

AZ31 (3% Al, 1% Zn) Mg 판재의 내식성 향상을 위해 Ti/Zr/Polymer 복합계의 Cr-free 화성처리 방법을 이용하였다. 염수분무시험을 통해 최고 72시간 ($5{\sim}10%$ 발청) 내식성이 나타남을 확인하였다. 화성피막의 내식성은 그 피막이 가진 성분, 균일도, 치밀도, 형상 및 두께에 의해 좌우되는 만큼 TEM, SEM을 통해 화성피막 구조가 내식성과 어떠한 관련이 있는지 조사하였다. 또한, 화성처리 전 단계 공정인 탈지와 산세 및 중화 공정의 변수 조절을 통해 전처리 공정이 최종 화성피막의 물성에 어떠한 영향을 미치는지 조사하였다. 탈지조건을 $35{\sim}40^{\circ}C$, 5분에서 $50{\sim}80^{\circ}C$, $10{\sim}20$분으로 변경 시 좀 더 균일한 외관을 얻을 수 있었고, 적절한 중화제 선택을 통해 화성피막을 균일하게 형성시킬 수 있었다. 투과전자현미경 결과로 미루어 화성피막의 두께보다 균일도와 치밀도가 내식성에 결정적인 영향을 미치는 것을 확인할 수 있었다.

• Membrane Journal
• /
• v.33 no.3
• /
• pp.87-93
• /
• 2023

Electrodialysis (ED) is essential in separating ions through an ion exchange membrane. The disposal of brine generated from seawater desalination is a primary environmental concern, and its recycling through membrane separation technology is highly efficient. Alkali is produced by several chemical industries such as leather, electroplating, dyeing, and smelting, etc. A high concentration of alkali in the waste needs treatment before releasing into the environment as it is highly corrosive and has a chemical oxygen demand (COD) value. The concentration of calcium and magnesium is almost double in brine and is the perfect candidate for carbon dioxide adsorption, a major environmental pollutant. Sodium hydroxide is essential for the metal carbonation process which, is easily produced by the bipolar membrane electrodialysis process. Various strategies are available for its recovery, like reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF), and ED. This review discusses the ED process by ion exchange membrane for alkali recovery are discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.603-612
• /
• 2006

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a way for artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion. To do this, we assessed hydraulic and geochemical properties depending upon various extraction and recharging conditions. While solely being recharged, the intrusion could be significantly retarded than those of recharge and extraction implied together. At 0.5 to 2 for the ratio of the extraction over the recharge rate, the fresh water was exploited from the tank, where the void regime was simultaneously saturated with the recharged water. In the meantime, the saline water zone was diluted and back-tracked by the recharged water due to forming a hydraulic geochemical barrier around the injection well. However, if the ratio was being increased to greater than 4, saltwater more deeply intruded to the freshwater zone because the artificial recharge was not sufficiently supplied to timely back-fill the void space. When the aquifer water was intermittently extracted at the ratio of $0.5{\sim}2$ over the recharge rate, the value of S.M.I. decreased, but increasing it to more than 4 unlikely escalated the value of S.M.I as much as $3{\sim}47%$ indicating that the salt water intruded. It finally revealed that the proper ratio of extraction/recharge or intermittent extraction would efficiently retracted seawater intrusion while the freshwater sources could be conservatively utilized.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2012

Recently, stratigraphic reservoirs are getting more attention than structural reservoirs which have mostly developed. However, recognizing stratigraphic thin gas reservoirs in a stacked section is usually difficult because of tuning effects. Moreover, if the reflections from the brine-saturated region of a thin layer have the same polarity with those from the gas-saturated region, we could not easily identify the gas reservoir with conventional data processing technique. In this study, we introduced a way to delineate the gas-saturated region in a thin layer reservoir using a spectral decomposition method. First of all, amplitude spectrum with the variation of the frequency and the incident angle was investigated for the medium which represents property of Class 3, Class 1 or Class 4 AVO response. The results show that the maximum difference in the amplitude spectra between brine and gas-saturated thin layers occurs around the peak frequency independent of the incident angle and the type of AVO responses. In addition, the amplitude spectra of the gas-saturated zone are greater than those of brine-saturated one in Class 3 and Class 4 at the peak frequency while those of phenomenon occur oppositely in Class 1. Based on the results, we applied spectral decomposition method to the stacked section in order to distinguish the gas-saturated zone from the brine-saturated zone in a thin layer reservoir. To verify our new method, we constructed a thin-layer velocity model which contains both gas and brine-saturated zones which have the same reflection polarities. As a result, in the spectral decomposed sections near the peak frequency obtained by Wigner-Ville Distribution (WVD), we could identify the difference between reflections from gas- and brinesaturated region in the thin layer reservoir, which was hardly distinguishable in the stacked section.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.308-308
• /
• 2014

본 연구에서 PVD법중 하나인 스퍼터링(sputtering)법에 의해 제작된 Al-Mg 코팅막은 SEM, GDS, XRD를 통해 표면 및 단면의 조성분포를 분석하였으며, 내식성을 평가하기 위하여 함량별, 열처리 조건별 Al-Mg 막을 각각 5% NaCl 염수분무 환경 및 3% NaCl 자연침지 환경에 노출시켰다. 막의 내식 특성에 영향을 미치는 열처리의 영향을 알아보기 위하여 열처리-비열처리간 재료 특성 및 내식성평가 결과의 연관성을 비교-분석하였다. 열처리 결과 Al-Mg계 금속간 화합물 $Al_3Mg_2$와 $Al_{12}Mg_{17}$이 관찰되었으며 내식성 평가 결과, 열처리 Al-Mg 막은 비열처리 Al-Mg 막과 비교하여 양호한 내식성을 나타냈었다. 열처리를 통해 마그네슘(Mg) 성분이 대부분 금속간 화합물상으로 존재함에 따라 균일하게 분포하여 치밀한 부식생성물을 형성하게 되고, 이에 따라 Al-Mg 막 내식성에 기여한 것으로 사료된다.