• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.577-604
• /
• 1998

chitosan은 골치유증진 및 골세포의 분화를 촉진하는 것으로 알려진 천연의 생분해성 고분자이다. 이연구에서는 chitosan 및 chitosan/tricalcium phosphate(TCP) 다공성 기질을 제조하여 골이식재 및 조직공학적 골형성을 위한 3차원적 세포배양 지지체로서의 가능성을 평가하고자 하였다. chitosan 용액 및 TCP가 포함된 chitosan 용액을 동결건조함으로써 소공의 크기가 $100-200{\mu}m$인 스폰지형태의 chitosan 및 chitosan/TCP 다공성 기질을 제작하였다. 골이식재로서의 효과를 평가하기 위하여 백서의 두개골 결손부에 제작된 chiosan 및 chitosan/TCP 다공성 기질을 각각 이식하고 2주 및 4주 후에 동물을 희생하여 조직학적으로 치유양상을 관찰하였다. 조직공학적 골형성을 위한 세포배양 지지체로서의 가능성을 평가하기 위하여 백서 태자의 두개골에서 분리된 골아세포를 chitosan 및 chitosan/TCP 다공성 기질에 각각 접종하고 56일간 배양하면서 각 기간 별로 세포수, 염기성 인산효소 활성, 축적된 calcium의 양을 측정하였고 배양된 세포-기질 혼합체를 광학현미경 및 주사전자현 미경하에서 조직학적 관찰을 시행하였다. 백서 두개골결손부에 이식된 chitosan 및 chiosan/TCP 다공성 기질은 별다른 이물반응 없이 자연 분해되면서 신생골조직 내에 매립되었으며 이식하지 않은 대조군에 비해 유의하게 높은 신생골형성 효과를 나타내어 우수한 골전도성이 있음이 확인되었다. 신생골형성 양상이나 형성된 양에 있어서 두 가지 기질간의 유의한 차이는 없었다. 골아세포-기질 혼합체의 배양결과, 접종후 배양 28일 경과 시까지 골아세포수는 지속적으로 증가하다가 이후에는 5 8일까지 성장정도가 둔화되었다. 염기성 인산효소의 활성 및 calcium 축적량은 접종후 배양시간경과에 따라 56일까지 지속적으로 증가하였다. 세포수 및 염기성 인산효소의 활성에서 두 기질간의 유의한 차이는 없었고, calcium 축적량에 있어서는 chitosan/TCP 기질에서 유의하게 높았고 증가속도도 컸다. 배양된 골아세포가 접종된 다공성 기질의 조직학적 관찰결과, 골아세포는 다공성 기질에 잘 부착하여 중층의 형태로 성장하면서 광화된 골기질을 형성함이 관찰되었다. 배양 14일부터 작은 골편형태의 골형성이 기질 표면에 부착되어 관찰되었고, 배양기간이 길어짐에 따라 성장하여 배양 56일째에는 상당한 양의 광화된 골질이 형성됨이 관찰되었다. 배양 56일 경과후의 광화된 골질의 양은 chitosan/TCP 기질에서 더 많았다. 이 연구의 결과, chitosan 및 chitosan/TCP 다공성 기질이 골이식재로서 뿐만 아니라, 조직공학적 골형성에 적용되는 골아세포의 배양을 위한 3차원구조의 세포지지체로 이용되어 골재생술식에 유용한 생체재료로 활용될 수 있음이 확인되었다.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.92-100
• /
• 1993

1.8 기능성 색소 1.8.1 pH 지시약 수용액 중의 수소 이온 농도 [H$\^$+/]([]는 농도를 의미한다)를 간단하게 조사하기 위해 pH지시약을 이용하고 있다. 지시약은 일반적으로 유기약산이라든지 약염기로 용액의 pH에 의존하여 수소 이온(프로톤)이나 수산화물 이온이 부가된다든지 탈리 한다든지하여 색이 변화한다. [H$\^$+/]의 값은 작기 때문에 pH = -log[H$\^$+/]의 값으로 표시하며, pH 지시약에 담근 시험지나 pH meter로 측정한다. 예를 들면 페놀프탈레인은 무색의 약산으로 [HIn]으로 표시된다. 그 수용액은 조금만 전리하며, 그 공역 염기 [In$\^$-/]은 적색을 띈다.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.121-128
• /
• 1985

The electrochemical reduction of uranyl ion in aqueous basic media has been examined by d. c. polarography, differential pulsed polarography and cyclic voltammetry. From voltammograms obtained in uranyl solutions containing 0.1M sodium bicarbonate, either with or without the same amounts of sodium tripolyphosphate it is concluded that the first wave corresponds to the reduction of $UO_2^{2+}$ to $UO_2^+$. It is assumed that the uranyl ion undergoes appreciable hydrolysis in these media. The hydrolysis product $UO_2OH^+$ from $UO_2^{2+}$ is not reduced at the first wave, but is reduced at the second wave together with $UO_2^+$. The diffusion current was found proportional to the uranyl concentration in a range between $7.5 {\times} 10^{-4}$ and $3.75 {\times}10^{-3}$M.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.492-500
• /
• 2002

Oxidized-polyacrylonitrile (oxy-PAN) was prepared by oxidation of PAN fiber at $240^{\circ}C$, followed by base catalyzed hydrolysis reaction. The chemical structure of PAN fiber in various pH conditions was characterized by $^{13}C-NMR$ spectroscopy. The characteristic contraction and expansion behavior of oxy -PAN fiber was observed in acidic and basic medium, respectively. In basic condition, water molecules might be absorbed into the fiber with the movement of charge balancing $Na^+$ ion, on the other hand, the water molecules seemed to be expelled in acidic condition to result in contraction. It was also observed that the facile chemical modification occurred due to free diffusion of aqueous reagent into the hydrophilic PAN fiber, and the morphology was affected by pH condition.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.426-431
• /
• 2013

Nanosized $TiO_2$ particles were prepared from titanium (IV) sulfate solution using base solutions at low reaction temperature ($95^{\circ}C$) and atmospheric pressure by hydrothermal precipitation method without calcination. The effects of preparation conditions, such as kind of base solutions (NaOH, $NH_4OH$, Monoethanolamine, Diethanolamine, Triethanolamine) and surfactants (CTAB, Span 20, SDBS), concentration of surfactants, temperature and pH, on the physical properties of $TiO_2$ particles have been investigated by XRD, SEM and Zeta-potential meter. Absorption area was also investigated by DRS in order to confirm the photocatalytic activity of the nanosized $TiO_2$ particles. It was turned out that, among base solutions, NaOH provides the smallest $TiO_2$ particles with excellent crystallinity. And cationic surfactant (CTAB) prepared smaller $TiO_2$ particles than any other surfactants. When CTAB is added in the concentration ratio of $Ti(SO_4)_2$:CTAB=10:1, $TiO_2$ particles with particle diameter of 5.8 nm were prepared. This is approximately 1/10 of that prepared without CTAB.

• Journal of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.31-39
• /
• 1974

Solutions of $Mn^{++}, Co^{++} and Zn^{++}$ were mixed with various dibasic organic acids in the presence of cation exchange resin at room temperature. The distribution ratios of the metal ions between resin and solution were measured, using radioactive metal ions as tracer. From the observed variation of the distribution ratios with acid anion concentrations, it was concluded that $Mn^{++}, Co^{++}$ and $Zn^{++}$ formed one-to-one complexes with succinate, malonate, o-phthalate and tartrate ions in aqueous, 20 % ethanol-water and 20 % acetone-water solutions. The results of the present investigation indicated that the relative stabilities of the complexes increased in the order: $Mn^{++} < Co^{++} < Zn^{++} complexes, Succinate < malonate < o-phthalate < tartrate complexes, Aqueous < mixed solvent systems.$

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.442-447
• /
• 2007

In order to improve the surface hardness of transparent plastic films, organic-inorganic hybrid coating solutions were synthesized by the sol-gel method. The coating solutions were prepared by adding GPTMS (glycidoxypropyl trimethoxysilane) to a colloidal silica (12 nm) suspension. PC(polycarbonate) substrates were dipped into the coating solutions and dried at room temperature for 10 min before being cured at $80^{\circ}C$ for 30 min. The effect of the solution pH and GPTMS content was investigated on the properties of coating films. The pencil hardness and adhesion to substrates of the coating films, prepared at acidic condition (pH 4), showed better properties than those at neutral or basic conditions. Also, the pencil hardness and adhesion to substrates of the coating films increased with increasing GPTMS content.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.60-65
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using activated carbon fiber(ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at lower potential, ACF felt was chemically modified in acidic, basic and neutral solution. Pore structure and functional groups of chemically modified ACF were examined, and the effect of treatment conditions was studied for the adsorption of U(VI). Specific surface area of all ACFs decreases by this treatment. The amount of acidic functional groups decreases with basic and neutral salt treatment, while the amount increases a lot with acidic treatment. The electrosorption capacity of U(VI) decreases on using the acid treated electrode due to the shielding effect of acidic functional groups. Base treated electrode enhances the capacity due to the reduction of acidic functional groups. The electrosorption amount of U(VI) on the base treated electrode at -0.3 V corresponds to that of ACF electrode at -0.9 V. Such a good adsorption capacity was not only due to the reduction of shielding effect but also the increase of $OH^-$ in the electric double layer on ACF surface by the application of negative potential.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.122-131
• /
• 2000

In this work, the effect of chemical surface treatments on morphology of carbon blacks was investigated in terms of cure behavior and tearing energy ($G_T$) of carbon blacks/rubber composites. As experimental results, the polar or nonpolar chemical treatment led to a significant physical change of carbon black morphology. The cure activation energies (Ea) and frequency factor (A) obtained from Kissinger equation decreased with improving the dispersion of carbon flacks, resulting in high reactivity. However, a significant advantage of carbon black/rubber composites is gained by carbon blacks treated in basic (BCB) or nonpolar (NCB) chemical solution, resulting in increasing the tearing energy. These results could be explained by changes of dispersion, agglomerate, surface functional group, void volume, and cross-linking density of carbon black/rubber composites.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2012

As one of the methods for recycling the FRP from the waste ships, separation of roving layer from the mat has some merits in a sense of the eco-friendly and economical recycling process. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using boiling concentrated sulfuric acid, methanol and isopropanol solution saturated with KOH, or hydrogen fluoride (HF) solution. Furthermore efficiently coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The layer differentiation and the automatic layer distraction move up the date of simple and automatic separation process for the waste FRP.