• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.831-837
• /
• 2015

Many persons and electronic devices are exposed to electromagnetic (EM) waves generated from magnetic resonance imaging (MRI) equipment, EM pulses (EMPs), and many other kinds of EM wave devices. Finger strips are used to provide shielding from these EM waves. Because of the high thermal conductivity of finger strips, they are used in the design of specialized doors that are installed in shielded rooms. In this study, we perform an accelerated life test using the load acceleration stress, which affects the main failure mode of finger strips. We predict the life of the finger strip under normal usage conditions based on the results of the accelerated life test. We compare the results with those predicted from the life test under normal usage conditions to evaluate the validity of accelerated life testing.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.86-91
• /
• 2008

The rubber was compounded with carbon black and silica series-filler to examine the effects of the various rubber fillers on a gasket material's suitability and fuel cell stack conclusion. The evaluation of a long term heat resistance and oil resistance of the mixed rubber material was performed considering at the drive environment of PEMFC. Test results of compression set for the most influencing property of gasket showed that it was about less than 15% at long term of up to 1000 h. In this experiment, FEM analysis is carried out about the rubber material's properties depending on each filler and the stress which is produced when a gasket is contracted by using various filler. Sealing force was expected to maximum 2.5 MPa from minimum 0.2 MPa by using FEM (finite element method) at stacking gasket to gasket.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.86-101
• /
• 2019

Remote sensing technology has been continuously developed both quantitatively and qualitatively, including platform development, exploration area, and exploration functions. Recently, the use cases and related researches in the agricultural field are increasing. Also, since it is possible to detect and quantify the condition of cropland and establish management plans and policy support for cropland and agricultural environment, it is being studied in various fields such as crop growth abnormality determination and crop estimation based on time series information. The purpose of this study was to analyze the vegetation index for agricultural land reclamation area using a UAV equipped with a multi-spectral sensor. In addition, field surveys were conducted to evaluate the accuracy of vegetation indices calculated from multispectral image data obtained using UAV. The most appropriate vegetation index was derived by evaluating the correlation between vegetation index calculated by field survey and vegetation index calculated from UAV multispectral image, and was used to analyze vegetation index of the entire area.

• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.448-454
• /
• 2004

In order to evaluate the water quality (N, P and C) and the biological mass balance of semi-enclosed brackish Lake Obuchi, Japan, an ecosystem model was developed and applied to the lake, using the flow field calculated by a hydrodynamic model. The time series data of the observed tide level, river discharge and meteorological parameters from January 2001 to December 2002 were incorporated as the parameters of the hydrodynamic model. Water quality and biomass balance were estimated by the ecosystem model, and simulated fluctuations In water quality agreed with our observations. The carbon contents of POC, phytoplankton and zooplankton in the lake were calculated by the model at an average 7200, 1500 and 22 kg, respectively, which somewhat agreed with our observations of POC (5900 kg), phytoplankton (3800kg), and zooplankton (150kg).

• Fire Science and Engineering
• /
• v.12 no.2
• /
• pp.3-15
• /
• 1998

The consequence analysis for jet and flash fire accidents by the continuous release of butane vapor was performed and effects of process variables on consequences were analyzed in standard conditions. For the continuous release (87.8 kg/s) of butane vapor at 8m elevated height in the debutanizing process of the naphtha cracking plant operating at 877 kPa, 346.75 K, we found that for the jet fire accident, shape and size of the flame could be predicted and thermal radiation estimated by API model at 200m distance from release point was 1.5kW/$m^2$, and that for the flash fire accident, effect range was 11.2~120.2m. Also, simulation results showed that effects of operating pressures on consequences were larger than those of operating temperatures and results of accidents were increased with increasing operating pressures. At this time, effects of operating pressures on XUFL were smaller(about 1/10) than those on XLFL for the flash fire accident.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.109-110
• /
• 2009

"드럼 코아시편 채취장치" 는 침출/내수성 시험, 압축강도 측정시험, 열 순환 시험등 의 파괴적 물성시험을 수행하기 위해서 경질(시멘트 고화체) 및 연질(파라핀왁스) 등의 방사성폐기물드럼으로부터 코아 시료를 채취하는 장비이다, 시편채취의 최대길이는 860 mm 이며 코아 시편의 직경은 50~200 mm 이며 일반적으로 "방사성폐기물 고화체의 물성시험"에 사용되는 시편은 실험실적으로 제조한 소규모 모의 고화체 시편과 고화공정에서 직접 채취한 소규모 시편, 200L 드럼으로부터 코아시편을 채취 가공하여 만든 시편과 같이 3종류가 있다. 고화공정에서 발생되는 고화체는 일반적으로 200 L 드럼에 주입되며, 고화체의 균일성 정도는 고화공정의 특성, 폐기물/고화매질 혼합비, 200 L 고화체 드럼의 냉각방식에 따라 다르다. 따라서, 실험실에서 제조한 시편과 공정에서 채취한 소규모시편은 실제 고화공정을 대표할 없으며 또한 실제 발생된 고화체의 조성과도 동일하다고 볼 수 없다. 따라서 200 L 드럼으로부터 코아시편을 채취하여 만든 시편이 고화공정과 고화체를 대표할 수 있는 시편으로 볼 수 있다 그러므로 고화체 및 고화공정을 대표할 수 있는 코아시편을 채취할 수 있는 장치를 제작하여 다양한 코아시편을 200 L 고화체 드럼으로부터 수직 코아시편을 채취할 필요가 있으며 실험에서 코아시편 채취속도와 연관된 Z-AXIS 의 Rpm은 운전범위는 0-2000 Rpm 이나 이때 너무 빠른 속도는 기계에 치명적인 손상을 초래 할 수 있으므로 위험한 것으로 나타났으며 500-1000 Rpm 의 속도가 적합한 것으로 시험되었으며 시편을 절삭하는 Spindle의 Rpm은 운전범위는 0-1500Rpm 이나 무리한 운전을 피해 가장 적절한 Speed로 운전해야하며 시험결과 500-800Rpm 이 최적운전범위로 나타났다 또한 시멘트고화체에서의 코아 채취시험에서는 Spindle의 속도는 500 Rpm, Z -AXIS 의 Rpm은 900 Rpm이 가장 적합한 것으로 나타났으며 성능평가시험을 통하여 비트부의 절삭속도와 Z축의 이동속도에 관한 그라프를 획득하였으며 시편의 크기에 따라서 Spindle의 속도를 증감하여야함을 확인할 수 있었다.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.72-77
• /
• 2010

Honeycomb core structure with its excellent stiffness and strength is being utilized in many fields such as interior building material. Because it is inexpensive and renewable, honeycomb paper production is economically and environmentally helpful. However, the paper needs to be fireproofed because it is vulnerable to fire. In this study, we have undergone the performance evaluation process of the honeycomb paper which is widely used as interior material of a fire door and packing material. Four kinds of honeycomb (a honeycomb made of flame-resistant paper; a honeycomb attached with conventional flame-resistant film made in the laboratory; honeycomb impregnated with flame retardant; a honeycomb attached with flame-resistant film after impregnating fire retardant) were used in the study to compare the fire retardant performance. As a result, the honeycomb with impregnated flame retardant showed the highest performance. The flame-resistant film was effective in delaying the igniting time but had a negative effect on the rate of heat and smoke production.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.1-8
• /
• 2019

Reaction-to-fire performance of pipe insulation materials should be approved in accordance with KS standards prior to installing water-based suppression systems because several fire accidents are initiated from insulation materials around ceilings or concealed space. A small room test to evaluate the reaction-to-fire performance of the polyethylene foam and elastomeric pipe insulation materials was conducted according to ISO 20632. Different fire growth rate and heat release rate are observed depending on the materials and construction methods. In order to improve a fire safety, the reaction-to-fire performance of pipe insulation material needs to be subdivided with regard to the heat release rate and smoke generation. Furthermore, the characteristics of the applying space are also required to be considered. Subsidiary materials for installation process such as tape and adhesive are found to provide an adverse effect to maintain a fire safety.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.808-812
• /
• 2008

Recently, the buildings have been likely to shape Super Tall trend. Therefore, the exterior parts of the buildings come to be changed. Instead of early heavy wall structure, it is changed to light wall concept of curtain wall system. However, the curtain wall system causes lots of loads due to the external surrounding factors of building. In particular, due to the densely built-up condition in Korea, the generation of dew condensation is getting severer Since there has been no standardized process that reviews this generation of dew condensation, it is very urgent for us to prepare the reviewing process for the dew condensation for construction business managers. The purpose of this study is to assess dew condensation function of the curtain wall and provide the basic data for the provision of the future dew condensation review process by comparing and analyzing the range of generation of dew condensation as well as temperature distribution according to the change of relative humidity at the identical temperature by selecting the Unitized system and Stick system which are the representative types of curtain wall system.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.210-215
• /
• 2019

Concrete members with wide surface area are vulnerable to cracking due to material behavior such as hydration heat and drying shrinkage. Recently many researches have been performed on improvement of strength and cracking resistance through fiber reinforcement, which are mainly focused on enhancement of tensile strength against cracking due to material behavior. In this paper, CFs(Cellulous Fibers) are manufactured for slurry type, and the engineering properties in cement mortar incorporated with CFs are evaluated for flow-ability, compressive, and flexural strength. Through SEM analysis, a pull-off characteristics of CF in matrix are analyzed. With CF addition of $0.5kg/m^3{\sim}1.0kg/m^3$, flexural strength is much improved and enough toughness of pull-off is also observed unlike plastic fiber containing smooth surface.