• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.103-108
• /
• 2020

This paper related with the performance evaluation of mDSE-MMA adaptive equalization algorithm which is possible to reduce the distortion that occurs in nonlinear communication channel like as additive noise, intersymbol interference and fading when transmitting the QAM signal. The DSE-MMA algorithm is possible to reduce the computational load compared to the presently MMA algorithm, it has the degraded equalization performance by this. In order to improve the performance degradation of DSE-MMA, the mDSE-MMA controls the step size according to the existence of arbitrary radius circle of equalizer output is centered at transmitted symbol point. The performance of proposed mDSE-MMA algorithm were compared to present DSE-MMA using the same channel and noise environment by computer simulation. For this, the recoverd signal constellation which is the output of equalizer, residual isi and MD, MSE learning curve which is represents the convergence performance and SER were applied as performance index. As a result of simulation, the mDSE-MMA has more superior to the DSE-MMA in every performance index.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2183-2190
• /
• 2000

A thermal aging is observed in a primary reactor cooling system(RCS) made of a casting stainless steel when the RCS is exposed for long period at the reactor operating temperature, 290~3300C An investigation of effects of thermal aging on a low cycle fatigue characteristics included a stress variations caused by a reactor operation and trip, is required. The purpose of the present investigation is to find an effect of a thermal aging of the CF8M on a low cycle fatigue life. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 300 and 1800hr at 4300C respectively. The low cycle fatigue tests for the virgin and two aged specimens are performed at the room temperature for various strain amplitudes($\varepsilon$ta), 0.3, 0.5, 0.8, 1.0, 1.2 and 1.5% strain. Through the experiment, it is found that the fatigue life is rapidly reduced with an creasing of the aging time. The experimental fatigue life estimation formulas between the virgin and two aged specimen are obtained and are proposed to a analysis purpose.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.540-544
• /
• 2013

During start up and shut down of a proton exchange membrane fuel cells (PEMFC), the performance and lifetime of PEMFC were reduced. In this study, effect of startup and shutdown were investigated in dead-end type PEMFC using oxygen as a cathode gas with polarization curve, impedance spectroscopy (EIS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Dummy load which eliminates residual hydrogen and oxygen during startup and shutdown operation should be applied to mitigated the degradation of PEMFC performance. At 50% relative humidity (RH) under the repetitive on/off cycling, the cell performance decayed faster than at 100% RH because of corrosion of the cathode carbon support. Water suppling into cell reduced the degradation rate of dead-end type PEMFC during start up and shut down cycling at 50% RH.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.28-35
• /
• 2014

Surveillance cameras in national border and coastline area often occur the video distortion because of rapidly changing weather and light environments. It is positively necessary to enhance the distorted video quality for keeping surveillance. In this paper, we propose an adaptive video enhancement algorithm in the various environment changes. To solve an unstable performance problem of the existing method, the proposed method is based on Retinex algorithm and uses enhanced curves which is adapted in foggy and low-light conditions. In addition, we mixture the weighted HSV color model to keep color constancy and reduce noise to obtain clear images. As a results, the proposed algorithm improves the performance of well-balanced contrast enhancement and effective color restoration without any quality loss compared with the existing algorithm. We expect that this method will be used in surveillance camera systems and offer help of national defence with reliability.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.126-131
• /
• 2010

The purpose of this study is to assess the condition of composites used in aircraft under varying temperature environment with ultrasound guided wave technique. Investigation of crucial influential factor on the composite health monitoring related to aircraft operational environments such as the number of thermal cycles and temperature deviation between ground level and flight altitude has been of a great concern for aircraft safety issue. In this study, ultrasonic guided wave health monitoring scheme is proposed to evaluate composite specimens damaged with the thermal fatigue simulating aircraft operational condition. Guided wave dispersion curves are used to select right modes which show a promising sensitivity to each different thermal fatigue damage level. The present approach can be also implemented as one of on-lines health monitoring tools for aircraft.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.92-98
• /
• 2008

A combination of the instrumented indentation and 3D morphology measurement has been tried in order to perform a real-time property measurement of degraded materials in gas pipelines; three-dimensional indent morphologies were recorded using a reflective laser scanner after a series of insturmented indentations on three metallic specimens. Dimensions of the permanent deformation zone and contact boundary were analyzed from the cross-sectional profile over an remnant indent and used for estimating yield strength and hardness, respectively. Estimated yield strength was comparable with that from uniaxial tensile test and actual hardness implying material pile-up effects was lower than the calculated value from indentation curve by $20{\sim}30%$. It means that this 3D image analysis can explain the material pile-up effects on the contact properties. Additionally, a combined system of indentation and laser sensor was newly designed by modifying a shape of the indentation loading fixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.503-508
• /
• 1991

The salted and dried mullet(Mugil Japonicus) roe had about 42% of protein and 41% of lipid content as major compoments. Therefore the lipid oxidation and the deterioration of protein occurred during drying and storage periods. In order to keep the good quality of the dried roe, acid, peroxide, thiobarbituric acid value and the contitutional amino acid were studied in the different drying air velocities at the conditions of 60% R.H. and $20^{\circ}C$ of drying air temperature. The optimum air velocity showed 2m/sec, which was excellently superior to the lipid and protein quality than those of other air velocities on the dried mullet roe. The drying period shortened from 20 days in the conventional processing method to 7 days in the modified processing method that had 2m/sec of drying air velocity. The drying rate curve had only a falling-rate drying period and not to have a constant-rate drying period.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2008

Coloriztion algorithms, which hide color information into gray images and find them to recover color images, have been developed recently. In these methods, it is important to minimize the loss of original information while the color components are embedded and extracted. In this paper, we propose a colorization method using a wavelet packet transform in order to embed color components with minimum loss of original information. In addition, the compensation processing of color saturation in the recovered color images is achieved. In the color-to-gray process, an input RGB image is converted into Y, Cb, and Cr images, and a wavelet packet transform is applied to the Y image. After analyzing the amounts of total energy for each sub-band, color components are embedded into two sub-bands including minimum amount of energy on the Y image. This makes it possible not only to hide color components in the Y image, but to recover the Y image with minimum loss of original information. In the gray-to-color process, the color saturation of the recovered color images is decreased by printing and scanning process. To increase color saturation, the characteristic curve between printer and scanner, which can estimate the change of pixel values before and after printing and scanning process, is used to compensate the pixel values of printed and scanned gray images. In addition, the scaling method of the Cb and Cr components is applied to the gray-to-color process. Through the experiments, it is shown that the proposed method improves both boundary details and color saturation in the recovered color images.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.311-320
• /
• 1998

The cryogenic fracture behaviors of austenitic stainless steel HN2 developed for nuclear fusion reactor were evaluated quantitatively by using the small punch(SP) test. The electrochemical polarization test was applied to study thermal aging degradation of HN2 steel. The X-ray diffraction(XRD) analysis was conducted to detect carbides and nitrides precipitated on the grain boundary of the heat treated HN2 steel. The mechanical properties of the HN2 steel significantly decreased with increasing time and temperature of heat treatment or with decreasing testing temperature. The integrated charge(Q) obtained from electrochemical polarization test showed a good correlation with the SP energy(ESP) obtained by means of SP tests. From the results observed in the x-ray diffraction and anodic polarization curve, it was known that the material the grain boundary. Combining SP test and electrochemical polarization test, it could be useful tools to non-destructively evaluate the cryogenic fracture behaviors and the aging degradation for cryogenic structural material.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.961-964
• /
• 2008

Fire safety is one of the important factors to be examined when applying ECC to actual concrete structures. The purpose of this study is to confirm whether the fire resistance of ECC satisfies the fire resistant requirements in order to use the fire protection material in concrete structures. Employed temperature curve are HC and RABT criterion, which are severe in various criterion of fire temperature in concrete structures. The test results show that ECC did not undergo any deterioration of fire resistance nor cause explosive spalling, which had been anticipated due to the presence of organic fibers. With comparison of current concrete and fire-resistance materials, the experimental results of ECC shows the better fire resistance performance than the other.