• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.21-40
• /
• 2023

This study analyzed the cold air characteristics of the Nakdong Jeongmaek, which is advantageous for the formation of cold air that can flow into the city, in order to suggest the wind ventilation corridor plans, which have recently been increasing interest as a way to improve the urban thermal environment. In addition, based on the watershed analysis, specific cold-air watershed areas were established and management plans were suggested to expand the cold air function of the Nakdong Jeongmaek. As a result of the analysis of cold air in the Nakdong Jeongaek, cold air was strongly generated in the northern forest of the Jeongamek, and flowed into nearby cities along the valley topography. On average, the speed of cold air was high in cities located to the east of the Jeongmaek, while the height of cold air layer was high in cities located to the west. By synthesizing these cold air characteristics and watershed analysis results, the cold-air watershed area was classified into 8 zones, And the plans were proposed to preserve and strengthen the temperature reduction of the Jeongmaek by designating the zones as 'Conservation area of Cold-air', 'Management area of Cold-air', and 'Intensive management area of Cold-air'. In addition, in order to verify the temperature reduction of cold air, the effect of night temperature reduction effect was compared with the cold air analysis using weather observation data. As a result, the temperature reduction of cold air was confirmed because the night temperature reduction was large at the observation station with strong cold air characteristics. This study is expected to be used as basic data in establishing a systematic preservation and management plan to expand the cold air function of the Nakdong Jeongmaek.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.323-336
• /
• 2023

We investigated the nickel potential and genesis of ultramafic rocks in the Yugu area to secure nickel resources in South Korea. The Yugu ultramafic rocks, located in the southwest of the Gyeonggi Massif, are characterized by spinel peridotite and exhibit strong serpentinization along their boundaries. The serpentinization is observed as olivine transformed to antigorite and chrysotile, while pentlandite, the nickel sulfide mineral, altered into millerite and awaruite. Serpentine displays distinct foliation, aligning subparallel to the ultramafic rock boundaries and foliation of Yugu gneiss. This suggests that the uplift of ultramafic rocks resulted in hydrothermal infiltration likely sourced from the Yugu gneiss metamorphism. The Yugu ultramafic rocks are residues after 5~18% partial melting of abyssal peridotite. Enriched light rare earth elements and Eu imply secondary metasomatism. Geochemistry suggests a link between the formation of Yugu ultramafic rock and the Triassic collision of the North and South China continents. The nickel content is around 0.17~0.21%, mainly contained in olivine and serpentine. Hence, in addition to the mineral processing study on the sulfide minerals, focused studies on oxide minerals for enhanced nickel recovery within the Yugu ultramafic rock are strongly suggested.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.200-211
• /
• 1993

Somatic hybrids of Pleurotus florida ASI 2016 and Pleurotus ostreatus ASI 2018 were obtained by protoplast fusion. The 40 fusants($P1{\sim}P40$) was examined for the yield on fermented and pasteurized rice straw in a tray. The carpophore yield of them were showed as the range of $27.0{\sim}155.2$, based on parental values of 100(ASI 2018), The pilei of fusants between orange white colored P. florida and dark grey colored P. ostreatus had mixed colors in the young stage. Other breeding programmes were performed to improve new varieties with high yield and good quality. A new oyster mushroom variety, Wonhyeongneutaribeosus(P72), was developed at the Agricultural Sciences Institute, Rural Development Administration in 1990. This P.florida-ostreatus-ostreatus hybrid P72 was selected from 38 protoplast fusion products($P41{\sim}P78$) between P.florida-ostreatus recombinant P5-M 43-arg rib and P. ostreatus ASI 2-13-0 2001-19-pro orn. The yield indexes of 38 hybrids ranged $40.5{\sim}152.7$ compared with the parental values of 100(ASI 2001). Hybrid P72 was characterized by the large fruiting bundle of semispherical shape with long stipe and by the small and circular pileus, resulting in lower harvesting cost. A significant increase in carpophore production was observed in somatic hybrids of protoplasts due to heterosis. A comparision of hybrid with parents P72 was made using isozyme analysis. The esterase banding patterns could be characterized by new bands in the hybrids. Seven fusion products of four crosses between P.florida ASI 2016 and P. ostreatus ASI 2018 were analysed with respect to the distribution of progenies and segregation of gene markers by random basidiospore analysis. Segregation of alleles should yield progeny of four genotypes in a Mendelian ratio of 1 : 1 : 1 : 1 for prototrophs, auxotrophs of one parental type, auxotrophs of the other parental type, and auxotrophic recombinants, respectively. However, five fusants of them did not detect one parental, P.ostreatus, type. Basidiospores could yield progeny of 16 genotypes in the cross of one of the recombinant P5-M43-arg $rib{\times}P. ostreatus$ ASI 2-13-pro orn but the segregants of three fusants were not detected clearly. The allele ratio of loci could be expected 1 : 1 : 1 : 1 for arg, rib, pro and orn. The ratio, however, would be changed to 4 : 1 : 1 : 1 with increasing proportion of argo In almost all the fusants, prototrophic recombinants were recovered in large numbers against auxotrophic markers. Parental genotypes were recovered with the recombinant progeny amounting to $38.68{\sim}99.56%$. The analysis provides proof of heterokaryosis and strong evidence for haploidy of vegetative nuclei, a sexual cycle consisting of nuclear fusion and meiosis.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.105-118
• /
• 2000

Anchored measurements (12.5 hr) of suspended sediment concentration and other hydrodynamic parameters were carried out at two stations located at the entrance to Hampyung Bay in summer (August 1999). Tidal variations in water temperature and salinity were in the range of 26.0-27.9$^{\circ}C$ and 30.9-31.5, respectively, indicating exchange offshore and offshore water mass. Active tidal mixing processes at the entrance appear to destroy the otherwise vertical stratification in temperature and salinity in spite of strong solar heating in summer. On the contrary, suspended sediment concentrations show a marked stratification with increasing concentrations toward bottom layer. Clastic particles in suspended sediments consist mostly of very fine to fine silt (4-16 ${\mu}$m) with a poorly-sorted value of 14.7-25.9 ${\mu}$m. However, at slack time with less turbulent energy, flocs larger than 40 ${\mu}$m are formed by cohesion and inter-collision of particles, resulting in a higher settling velocity. Strong ebb-dominated and weak flood dominated tidal currents, in the southwestern and the northeastern part, respectively, result in a seaward residual flow of -10${\sim}$-20 cm $s^{-1}$ at station H1 and a bayward residual flow less than 5.0 cm $s^{-1}$ at station H2. However, mean concentration of suspended sediments at station H1 is higher at flood (95.0-144.1 mg $1^{-1}$) than in ebb (75.8-120.9 mg $1^{-1}$). On the contrary, at the station H2, the trend is reversed with higher concentration at the ebb (84.7-158.4 mg $1^{-1}$) than that at the flood (53.0-107.9 mg $1^{-1}$). As a result, seaward net suspended sediment fluxes ($f_{s}$) are calculated to be -1.7 ${\sim}$-$15.610^{3}$ kg $m^{-2}$ $s^{-1}$ through the whole water column. However, the stations H1 and H2 show definitely different values of the flux with higher ones in the former than in the latter. Alternatively, depth-integrated net suspended sediment loads ($\c{Q}_{s}$) for one tidal cycle are also toward the offshore with ranges of 0.37${\times}$$10^{3}$ kg $m^{-1}$ and 0.21${\times}$$10^{3}$ kg $m^{-1}$, at station H1 and H2, respectively. This seaward transport of suspended sediment in summer suggests that summer-time erosion in the Hampyung muddy tidal flats is a rather exceptional phenomenon compared to the general deposition reported for many other tidal flats on the west coast of Korea.

• Reproductive and Developmental Biology
• /
• v.28 no.1
• /
• pp.21-27
• /
• 2004

This study was conducted to investigate the developmental ability of caprine embryos after somatic cell interspecies nuclear transfer. Recipient bovine and porcine oocytes were obtained from slaughterhouse and were matured in vitro according to established protocols. Donor cells were obtained from an ear-skin biopsy of a caprine, digested with 0.25% trypsin-EDTA in PBS and primary fibroblast cultures were established in TCM-199 with 10% FBS. The matured oocytes were dipped in D-PBS plus 10% FBS ＋ 7.5 $\mu$ g/ml cytochalasin B and 0.05M sucrose. Enucleation were accomplished by aspirating the first polar body and partial cytoplasm which containing metaphase II chromosomes using a micropipette with an out diameter of 20∼30 $\mu$m. A Single donor cell was individually transferred into the perivitelline space of each enucleated oocyte. The reconstructed oocytes were electric fusion with 0.3M mannitol fusion medium. After the electrofusion, embryos were activated by electric stimulation. Interspecies nuclear transfer embryos with bovine cytoplasts were cultured in TCM-199 medium supplemented with 10% FBS including bovine oviduct epithelial cells for 7∼9 day. And porcine cytoplasts were cultured in NCSU-23 medium supplemented with 10% FBS for 6 ∼8 day at $39^{\circ}C, 5% CO_2 $in air. Interspecies nuclear transfer by recipient bovine oocytes were fused with electric length 1.95 kv/cm and 2.10 kv/cm. There was no significant difference between two electric length in fusion rate(47.7 and 44.6%) and in cleavage rate(41.9 and 54.5%). Using electric length 1.95 kv/cm and 2.10 kv/cm in caprine-porcine NT oocytes, there was also no significant difference between two treatments in fusion rate(51.3 and 46.1%) and in cleavage rate(75.0 and 84.9%). The caprine-bovine NT oocytes fusion rate was lower(P＜0.05) in 1 pulse for 60 $\mu$sec(19.3%), than those from 1 pulse for 30 $\mu$sec(50.8%) and 2 pulse for 30 $\mu$sec(31.0%). The cleavage rate was higher(P＜0.05) in 1 pulse for 30 $\mu$sec(53.3%) and 2 pulse for 30 $\mu$sec(50.0%), than in 1 pulse for 60 $\mu$sec(18.2%). The caprine-porcine NT oocytes fusion rate was 48.1% in 1 pulse for 30 $\mu$sec, 45.2% in 2 pulse for 30 $\mu$sec and 48.6% in 1 pulse for 60 $\mu$sec. The cleavage rate was higher(P＜0.05) in 1 pulse for 30 $\mu$sec(78.4%) and 1 pulse for 60 $\mu$sec(79.4%), than in 2 pulse for 30 $\mu$sec(53.6%). In caprine-bovine NT embryos, the developmental rate of morula and blastocyst stage embryos were 22.6% in interspecies nuclear transfer and 30.6% in parthenotes, which was no significant differed. The developmental rate of morula and blastocyst stage embryos with caprine-porcine NT embryos were lower(P＜0.05) in interspecies nuclear transfer(5.1%) than parthenotes(37.4%).

• (The)Study of the Eastern Classic
• /
• no.63
• /
• pp.9-41
• /
• 2016

This paper focuses on 'clean(cheong: 淸)' kinds of style terminologies among various style terminologies appearing in Heo Gyun's Seongsushihwa("惺?詩話") and tries to analyze the distinctive points which 'clean(cheong: 淸)' kinds of style terminologies include. In Heo Gyun's Seongsushihwa, 11 of 'clean' kinds of style terminologies, such as "cheonggyeong(淸勁), cheonghryang(淸亮), cheongryeo(淸麗), cheongseom(淸贍), cheongso(淸?), cheongweol(淸越), cheongjang(淸壯), cheongjeol(淸絶), cheongjeol(淸切), cheongchang(淸?), cheongcho(淸楚)," were used. This paper focuses and analyzes 'cheonggyeong(淸勁)', 'cheongjeol(淸切)', 'cheongcho(淸楚)', and 'cheongweol(淸越)' that he suggested through applying to real literary pieces. The result of analysis indicates that 'clean' kinds of style terminologies 'cheonggyeong', 'cheongjeol', 'cheongcho', and 'cheongweol' share the same 1st character 'clean(淸)', yet have distinctive qualities by the 2nd characters. These 4 style terminologies all share 'cheong(淸)' image which means clear and clean, yet each one has the attribute of the 2nd character that indicates each one's individual characteristic. It is apparent that 'Cheonggyeong(淸勁)' reflects the 'gyeong(勁)' image meaning upright and solid and implies poems of poets' steadfast spirit within clear boundary; 'cheongjeol(淸切)' reflects the 'jeol(切)' image meaning either desperation and imminence or pitifulness and sorrow and implies poems of poets' urgent and pitiful emotions within clear and clean boundary; 'cheongcho(淸楚)' reflects the 'cho(楚)' image meaning either delicacy and fineness or slenderness and tenderness and implies poems of poets' beautiful but not luxurious, delicate and tender emotions within clear and clean boundary; and 'cheongweol(淸越)' reflects the image of 'weol(越)' meaning unworldliness and excellency and implies poems, within clear and clean boundary, of excellent appearance and mentality surpassing mundane world. Compared with the 1st character's attributes of the style terminologies which Heo Gyun used, the 2nd characters's attributes do not appear that vivid. Especially, in the case that the 2nd characters have similar meanings, it is not easy to clarify the categories. Indeed, in order to grasp clear and distinctive qualities of style terminologies, the kinds of them need to be initially categorized by the 1st characters, and then sorted by the 2nd characters. In this case, the contents which the 2nd characters of style terminologies indicate should be considered. It is because style terminologies explain both literary pieces' aesthetic qualities and writers' personalities, and because explanations about literary pieces' aesthetic qualities includes not only the conclusive poetic or semantic boundaries which literary pieces' created but also literary pieces' creation processes and expression techniques. Through the style terminologies with Heo Gyun used in Seongsushihwa, it can be aware that he evaluated poems focussing more on the conclusive semantic boundaries that poets' spirits and poems created than expression techniques or creation methods. The overall aspects Heo Gyun's such style criticism has will be checked out in more detail through further studies by examining more materials.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.17.2-19
• /
• 1982

The sinus tympani is subject to great variability in the size, shape and posterior extent. A heavy compact bony zone, especially in the posterior portion and the narrow space between the facial nerve and posterior semicircular canal are the limitation of surgical approach. The facial recess should be opened, creating a wide connection between the mesotympanum and mastoid in the Intact canal wall tympanoplasty with mastoidectomy. The surgically created limits of the facial recess are the facial nerve medially, the chorda tympani laterally and the bone adjacent to the incus superiorly. Using adult Korean's thirty-five temporal bones, the authors measured the osteologic reslationship in the posterior tympanum, especially sinus tympani and facial recess. The result was as followed. 1. The average distance from the anterior end of the pyramidal eminence. 1) to the edge of the sinus tympani directly posterior was 2.54(1.05-5.40)mm. 2) to the maximum posterior extent was 3.22(1.25-7.45)mm. 3) to the maximum cephaled extent was 0.67 (0.40-1.75)mm. 2. The boundary of the sinus tympani was 82.9% from the lower margin oval window to the upper margin round window niche. 3. The deepest part of the sinus tympani was 62.9% in the mid portion, between the ponticulus and subiculum. 4. The oblique dimension from the fossa incudis above to the hypotympanum below was 8.13(7.90-9.55)mm. 5. The transverse dimensions midway between the oval window above and round window below was 3.00(2.85-3.45)mm. 6. The transverse dimension at the level of the fossa incudis was 1.81(1.40-2.15)mm. 7. The facial nerve dehiscence was 14.3%. 8. Anterior-posterior diameter of the footplate was 2.98(2.85-3.05) mm. 9. The average distance from the footplate. 1) to the cochleariform process was 1.42(1.35-1.55) mm. 2) to the round window niche was 1.85(1.45-2.10) mm.