• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.126-133
• /
• 2004

MRE-1 Dual Thruster Module(DTM), which will be used in KOMPSAT(Korea Multi-Purpose Satellite), can provide reliable and cost-effective means for attitude and maneuvering control system. Thruster heat shield, one of the main components of DTM, is designed to prevent the critical radiative heat exchange between thruster and satellite during firing. To overcome the manufacturing difficulties, a electroforming process is preferred to classical welding process. In this case, an inner diameter of a new shield will be decreased a little due to the change of manufacturing process. Therefore, the interference problem between thruster nozzle and heat shield is investigated through structural analysis and their results are described in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.27-30
• /
• 2005

Hanwha Corporation succeeded in domestic development of thruster heat shield for KOMPSAT-2 propulsion subsystem partly. Thruster heat shield, one of the main components of DTM, is designed to prevent the critical radiative heat exchange between thruster and satellite during firing. To overcome the manufacturing difficulties, an electro-forming process is preferred to classical welding process. In this case, an inner diameter of a new shield will be decreased a little due to the change of manufacturing process. The interference problem between thruster nozzle and heat shield was investigated through structural analysis by KARI. Hanwha manufactured heat shield based on the analysis results. In this paper, full development process is described for design, analysis, manufacturing of heat shield.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.92-98
• /
• 2006

An 1 lbf of NASA standard monopropellant thruster, MRE-1, is used for KOMPSAT (Korea Multi-Purpose Satellite) which is launched in 2006 and provides reliable and cost-effective means for attitude and maneuvering control system. The monopropellant thruster obtains required thrust by thermal decomposition process of propellant through catalyst bed. During firing, the decomposition plays a role of a heat source that may occur an excessive radiation heat transfer to peripheral structures and electronics in relatively low temperature condition.Therefore, the radiation heat shield is needed to prevent the critical radiative heat exchange between thruster and satellite during firing. This paper summarizes an overall development process of radiation heat shield from the design engineering up to the manufacturing.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.468-472
• /
• 2003

MRE-1 dual thruster module(DTM) which will be installed to the present under development KOMPSAT(Korea Multi-Purpose Satellite) can provide reliable and cost-effective means of propulsive control for attitude and maneuvering control system. Thruster heat shield, one of the main components of DTM, is designed to intercept the radiative heat exchange between thruster and satellite during firing. The inside diameter of the current configuration will be decreased a little compared with that of the previous one due to manufacturing method change. Therefore, the possibility of interference between thruster and heat shield due to configuration change is investigated through structural analysis and their results are described in this paper.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.119-120
• /
• 2000

The thermal shield for the TF coils and PF coils has been located between the coils and vacuum vessel. The thermal shielding cryopanel is cooled under 80K by a fored flow of helium gas using cooing pipes on the cryopanel. Design of the KSTAR thermal shield of vacuum vessel is described.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2000.02a
• /
• pp.121-122
• /
• 2000

KSTAR coils use super-conducting magnet systems. These coils operate around 4.5K and therefore require a thermal shield to reduce the heat load from outer cryostat. 80K thermal shields must be cooled by a forced flow of He gas at 20 bars without the pressure drop of 0.45 bar. Designed thermal shield shows that the pressure drop is lower than that of 0.5 bar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.193.2-193.2
• /
• 2014

열차폐 코팅(Thermal Barrier Coating)은 주로 항공기 엔진이나 화력발전용 터빈 등의 $1300^{\circ}C$ 이상의 고온에서 사용되는 부품에 적용되어 모재(내열합금)의 손상 방지 및 에너지 효율 향상을 위해 사용되고 있다. 열차폐 코팅의 경우 Plasma Spray 공법과 EB-PVD(전자빔 물리 증착법) 공법이 가장 많이 사용되고 있다. Plasma Spray에 의한 열차폐 코팅 공정은 생산 비용이 저렴하고 수평형 적층 구조를 통한 높은 열전도율을 가지는 장점이 있으며, EB-PVD 공정은 수직형 구조의 열차폐막을 통해 내열 충격성과 내열 사이클성이 양호하다는 장점이 있다. 본 연구에서는 열 사이클의 내구성이 뛰어난EB-PVD를 이용하여 열차폐 코팅 공정연구를 진행하였다. 본 연구소에서 사용하고 있는 EB-PVD 는 종래의 장치와는 달리 70 kW급 전자총 5기가 장착 되어 있으며, 각각 시편 가열용 전자총 2기 및 피코팅용 가열 전자총 3기로 구성되어 있다. 이런 구성을 통해 다양한 종류의 열차폐 박막과 높은 결정성과 치밀도를 가지는 박막 형성할 수 있을 것이다. 본 발표에서는 EB-PVD 공정 연구결과 및 향후 실용화를 위한 개발 연구 방향에 대해서 기술하였다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.45-47
• /
• 2001

The function of the thermal shield(TS) is to eliminate the thermal radiation from the room temperature side to the coil temperature(4.5K) region so as to reduce the thermal load on the He refrigerator. The TS is composed of multilayer insulation(MLI) which is coated very thin aluminum on the insulating material, cryopanel which is cooled by cold gaseous He, and supports which stand the cryopanel and MLI on the room temperature part. The thermal shield for the TF coils and PF coils has been located between the coils and vacuum vessel. The thermal shielding cryopanel is cooled under 80 K by a forced flow of helium gas using cooling pipes on the cryopanel.