• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.343-351
• /
• 2011

We prepared polyurethane foam/cloisite30B/phosphates composites and characterized their rise time, density, cell morphology, and thermal properties. The composites were synthesized with polyadipatediol-cloisite30B composite (f=2.0), polyether-polyol (f=4.6), polymeric 4,4-diphenyl methane diisocyanate (f=2.5), and D-580 (phenyl polyoxyalkenyl phosphate). As a blowing agent, cyclopentane and distilled water were used at various concentrations of D-580 from 0 to 2.81 wt%. The rise times of PUF/Closite30B/Phosphate composites blown with distilled water were faster than those blown with cyclopentane by 30%. The composites blown with cyclopentane had spherical-shape cells and the cell diameter was decreased with increasing D-580 wt%. While $T_g$ of the composites blown with cyclopentane linearly decreased with increasing the D-580 content, the $T_g$ of the composites blown with distilled water increased with the D-580 content. All PUF/Closite30B/Phosphate composites began to decompose from $250^{\circ}C$. The composites blown with cyclopentane showed the second thermal decomposition at temperatures higher than $500^{\circ}C$. The thermal stability of all composites increased with the D-580 content. The effect of D-580 on the thermal stability of the composites was measured higher at the composites blown with distilled water.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.259-271
• /
• 2019

We evaluated mineralogical, physical property and accelerated weather resistance of cinnabar, realgar and orpiment used as cultural heritages and traditional paintings. JB and JS are sample names of cinnabar and JH and UH are sample names of orpiment and Realgar, respectively. As a result of mineralogical property evaluation, Jinsa was identified cinnabar (HgS) and there was no difference in chemical composition according to the grade. UH and JH were confirmed realgar (AsS) and orpiment (As₂S₃), respectively. The polarization characteristics such as shape and color indicate that pigments using our test were natural mineral pigment observed by polarization microscope. Especially, in the case of cinnabar, it is not easy to distinguish between natural mineral pigment and synthetic pigment. But the results of polarization microscope said that cinnabar is natural occurring mineral which have authentic mineral particle and unevenly fracture. As a result of thermal analysis, JH has a higher glass transition temperature and heat stability than UH. After accelerated weather test, cinnabar, realgar and orpiment were striking result in color change because of light degradation. Red color of cinnabar turn into black and the color of realgar and orpiment became brighter than before. JB (meta-cinnabar) is more photosensitivity and faster becoming dark than JB (cinnabar). Finally light transforms realgar (red, As₄S₄) in arsenolite (As₂O₃).

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.81-86
• /
• 1996

The physical properties of epoxy molding compound (EMC) according to the change of softening point of epoxy resin have been investigated in order to study the relationship between the properties of o-cresol novolac epoxy resin, which is main component of EMC for semiconductor encapsulation, and EMC. The softening points of used epoxy resin are 65.1 $^{\circ}C$, 72.2 $^{\circ}C$, and 83.0 $^{\circ}C$, respectively. The flexural strength and flexural modulus as mechanical properties were measured, and thermal expansion coefficient, thermal conductivity and glass transition temperature (Tg) as thermal properties, and spiral flow as moldability have been investigated to see the change of physical properties of EMC. The flexural modulus, thermal expansion coefficients in the glass state (${\alpha}_1$), and thermal conductivity of EMC were found to be keep constant value irrespective of the change of softening point, but Tg increased with softening point of epoxy resin, and the spiral flow decreased with that. It can be considered that these phenomena are due to the increase of crosslinking density of EMC according to the increase of softening point. The transition points were found out in the thermal expansion coefficient data in the rubbery state (${\alpha}_2$) and the flexural strength data. These can show the decrease of filler dispersion according to increase of epoxy resin viscosity.

• Journal of the Korean Geographical Society
• /
• v.48 no.4
• /
• pp.509-532
• /
• 2013

Minimum Housing Standard is an instrument to cope with the problems of public health and community hygiene, deterioration of working class housing conditions appeared commonly in the process of capitalist industrialization and rapid rural-to-urban migration. This paper aims to examine the institutionalization of histories of minimum housing standard in the advanced countries, and analyze the spatio-temporal changes and characteristics of households failing to meet the New Minimum Housing Standard in Seoul Metropolitan since 1995. The analysis of this paper is based on the census data on population and housing. The results are as follows; Households failing to meet the New Minimum Housing Standard in Seoul are 501,000 households(1.368 million person, 14.4%). This means Seoul has overtaken the national average 11.8% for the first time and there are structurally marginal band of households who can not improve the housing conditions by themselves. In addition, the fact that the rate of Seoul households living in the marginal shelter including the basement and rooftop room is the highest in Korea means the housing quality issues of Seoul is serious. Spatial distribution of households failing to meet the standard is divided into the northeast area and the southwest area in Seoul. Main features of the households are female-headed families, middle and old-aged people, divorce families, lower educated people, under and graduate students, non-apartments, dweller in 15~20 year old houses.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.174-174
• /
• 2008

초음파를 이용하여 액체 연료를 분사하면 균일한 입경과 미립화가 우수하며 에너지 절약과 공해방지등을 할 수 있다. 또한 유속과 유량에 관계없이 이용할 수 있어 반도체 분야의 웨이퍼와 평판 표시기상에 사진 석판용 화학물질의 균일도포 컴퓨터 하드 디스크의 광택제 도포등에 사용할 수 있다. 이처럼 초저의 유출 용량을 요구하는 모든 공정 및 액체연료의 분사가 요구되는 모든 산업에 적용할 수 있는 장점을 가지고 있다. 하지만 현제까지 주로 사용되고 있는 초음파노즐의 액츄에이터는 단판액츄에이터형로 높은 교류전압을 인가해주어야 하는 단점을 가지고 있다. 이 단점을 해결하기 위해 적층액츄에이터형을 사용하여 초음파 노즐 구동하면 낮은 교류 입력전압에서도 단판액츄에이터형 초음파 노즐과 같은 특성을 가질 수 있다. 또한 초음파 노즐의 구동시 기계적인 진동을 이용하므로 많은 열을 발생시켜 노즐의 온도가 상승하여 세라믹 액츄에이터에도 그 영향을 미치게 되어 열적 열화 현상이 일어날 수 있기에 높은 큐리온도를 가지는 액츄에이터가 필요하다. 본 실험에서는 $Pb(Mn_{1/3}Nb_{2/3})_{0.02}(Ni_{1/3}Nb_{2/3})_{0.12}(Zr_{0.50}Ti_{0.50})_{0.86}O_3$ 조성을 사용하여 $900^{\circ}C$의 저온에서 액상 소결하여 적층혈액츄에이터를 제작하였으며 압전 및 유전 특성을 조사하였다. 제작된 초음파노즐을 구동하기 위해서는 약 36kHz의 30V이상의 교류입력전압 할 수 있는 구동회로가 필요로 한다. 압전액츄에이터의 구동을 위해서는 정확한 정현파 입력이 필요 없다. 압전액츄에이터의 특성상 유사 정현파 입력 만으로도 임피던스 매칭이 이루어지기 때문에 설계가 쉽고 간편한 Push-Pull 방식을 이용한 PWM인버터를 사용하였고 인버터의 출력 주파수를 34~38kHz까지 가변 할 수 있게 설계하였다. 제작된 적층액츄에이터형 초음파 노즐을 PWM인버터로 실제 액체 연료인 경유를 분사하였을 때의 액츄에이터의 온도 변화에 따른 공진주파수와 온도 의존성, 전기적 특성을 조사하고 미립화 분사되는 경유의 미립자 크기 및 최대 분사량을 조사 하였다.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.290-296
• /
• 2008

This study examined the physicochemical properties of chemically and enzymatically cross-modified waxy rice starches. The waxy rice starch was cross-linked using phosphorous oxychloride, and then partially hydrolyzed with four commercial ${\alpha}$-amylases (Fungamyl, Termamyl, Liquozyme, Kleistase). Swelling power and the moisture sorption isotherm did not change with cross-modification. Two cross-modified waxy rice starches (hydrolyzed with Termamyl and Liquozyme) showed higher solubilities than native starch and the two other cross-modified starches (hydrolyzed with Fungamyl and Kleistase). In terms of RVA characteristics, the two cross-modified waxy rice starches hydrolyzed with Termamyl and Liquozyme, respectively, had lower peak viscosity, holding strength, and final viscosity than the native starch. However, the two starches hydrolyzed with Fungamyl and Kleistase, respectively, revealed higher peak viscosity, holding strength, and final viscosity than the native starch. No differences were displayed in the X-ray diffraction patterns and DSC thermal characteristics of the cross-modified waxy rice starch as compared to both the native and cross-linked starches, indicating that cross-linking and enzymatic hydrolysis occurred in the amorphous region and did not alter the crystalline region.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.40-44
• /
• 2015

National and international standards for curtain wall glass are focused on wind pressure and insulation performance, but disasters such as fires and earthquakes are not considered. Failure of curtain wall glass during a fire in a skyscraper increases the loss of lives and property due to the spread of fire. Therefore, the fire resistance of curtain wall glass should be investigated, and technology to prevent glass failure should be developed to prevent fire damage due to spreading fire. It is important to predict the starting point of cracks and the cause of glass failure to prevent it effectively using the limited water in a skyscraper. In this study, double glazed glass was exposed to a radiator in an experiment performed to analyze the thermal characteristics. The results show that glass that was not directly exposed to high temperature and pressure was broken. To identify this failure case, numerical analysis was performed. Three glass specimens were installed in an ISO 9705 room and exposed to radiation using a radiator, and a thermocouple was used to measure the temperature on the surface of the glass. Widely used double glazed glass was analyzed for weakness to fire.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.137-147
• /
• 1999

Fluidized-bed thermal desorber coupled with a heat pipe was investigated for the remediation of soil contaminated with diesel oils. Thermal gravimetric analysis by Cahn-balance indicated that the desorption of diesel oils from the soil particles was mainly governed by the internal diffusion at low concentration of less than 0.5 wt. % of oils in the soil particles. In fluidized-bed experiments. increase of fluidizing gas velocity reduced the residual oils of the contaminated soils, the increase of soil feed rate decreased efficiency of fluidized-bed desorber. A mathematical model was developed by incorporating Fickian diffusion kinetics into the Kunii-Levenspiel model Simulation results showed reasonable agreement for the performance of fluidized-bed thermal desorber.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2001

This study was carried out to investigate the effects of storage temperature(5$\^{C}$ and 25$\^{C}$) and time(1, 24, 48 and 72hours) on the retrogradation characteristics of mungbean starch gels by using differential scanning calorimeter, rapid visco-analyzer, $\beta$-amylase method, X-ray diffractometer and scanning electron microscope. Endothermic peaks of gels stored at 5$\^{C}$ were shifted to the lower temperature than those stored at 25$\^{C}$ and endothermic enthalpy of gels stored at 5$\^{C}$ was greater than that stored at 25$\^{C}$. DSC thermograms showed that the retrogradation rate of gels stored at 5$\^{C}$ was higher than that shored at 25$\^{C}$. The pasting properties of the gels such as peak viscosity and final viscosity increased with increasing storage time except the gels stored at 25$\^{C}$ for 72 hours and this trend was more apparent at the storage temperature of 5$\^{C}$. The digestibility measured by $\beta$-amylase method decreased with increasing storage time and this trend was more apparent at the storage temperature of 5$\^{C}$. X-ray diffraction patterns of the gels stored at 5$\^{C}$ showed more distinct peak than those stored at 25$\^{C}$, but no difference was detected by the storage time. The microstucture of all the gels showed a well developed three dimensional network The network structure of the gels stored at 25$\^{C}$ formed a thick matrix after 72 hours and those stored at 5$\^{C}$ from the early stage of storage.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.2
• /
• pp.61-67
• /
• 2018

Welding preheating means that the surface of the base material to which the metal is welded before the main welding is heated to a constant temperature. It prevents the cracks of the adjacent influences such as reduction of material hardening degree by controlling the cooling rate, suppression of segregation of impurities, prevention of thermal deformation, and moisture removal. For this reason, it is a necessary operation for high quality welding. Induction heating is an efficient heating method that converts electric energy into heat energy by applying electromagnetic induction phenomenon. Compared with combustion heat generated by gas and liquid, it is clean, stable, and economical as well as rapid heating. It can be heated regardless of the shape, depth and material of the heating body by modifying the shape of the frequency and the coil with a simple structure. In this paper, we implemented a low frequency welding preheating system using induction heating technique and observed the temperature changes of coil resistance, inductance and automotive transmission parts according to the height of each transmission in winding coil for three kinds of automotive transmission parts. We confirmed that the change of current is a very important factor in the low frequency heating.