• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4763-4768
• /
• 2014

Recently, aluminum pipes have been used instead of steel pipes for open and shut machines in vinyl housing because of its corrosion-resistance and light weight. In particular, the light weight is very useful for fitting and removal by human resources. On the other hand, an aluminum pipe is weak in winter because aluminum has a larger thermal expansion coefficient than steel. This study examined the freezing and bursting of aluminum pipes by numerical analysis. The mechanical-thermal deformation characteristics were analyzed under the condition of ice volumetric expansion in aluminum pipes reaching 50%. From numerical analysis, large stresses above the yield stress occurred in aluminum pipe after ice expanded in the net diameter immediately. In addition, the freezing and bursting of aluminum pipes was predicted around an ice volumetric expansion of 6 - 7% because the thickness of the aluminum pipe reached an aluminum elongation ratio of 17%. Therefore, it is recommended that aluminum pipes be sealed perfectly to prevent water flow in the pipe. These results suggest that it is very difficult to prevent freezing and bursting of aluminum pipes by water freezing in the pipe.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.113-121
• /
• 2015

Remote sensing technology using a multi-spectral satellite imagery can be utilized for the analysis of urban heat island effect in large area. However, weather condition of Korea mostly has a lot of clouds and it makes periodical observation using time-series of satellite images difficult. For this reason, we proposed the analysis of urban heat island effect using time-series of Landsat TM images and ATC model. To analyze vegetation condition and urbanization, NDVI and NDBI were calculated from Landsat images. In addition, land surface temperature was calculated from thermal infrared images to estimate the parameters of ATC model. Furthermore, the parameters of ATC model were compared based on the land cover map created by Korean Ministry of Environment to analyze urban heat island effect relating to the pattern of land use and land cover. As a result of a correlation analysis between calculated spectral indices and parameters of ATC model, MAST had high correlation with NDVI and NDBI (-0.76 and 0.69, respectively) and YAST also had correlation with NDVI and NDBI (-0.53 and 0.42, respectively). By comparing the parameters of ATC model based on land cover map, urban area had higher MAST and YAST than agricultural land and grassland. In particular, residential areas, industrial areas, commercial areas and transportation facilities showed higher MAST than cultural facilities and public facilities. Moreover, residential areas, industrial areas and commercial areas had higher YAST than the other urban areas.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.373-378
• /
• 1991

The skin and fleshy substance on the net fiber of sponge-gourd fruit pressed mechanically was removed with 0.2% NaOH solution in $3{\sim}5$ hours. The treatment of 0.2% NaOH with 0.02% Monopol(non-ionogenic polyoxethylen derivative) as surfactnat and with 0.1% $Ca(OCl)_2$ as bleaching agent enhanced the effect to remove the fleshy substance and improve the quality of net fiber. Also, the wet hardness and tensile strength of net fiber were controlled by the crosslinkage of the fiber with glu tardialdehyde, glyoxal, and formalin, respectively. The net fiber was stable on the acid and alkaline solutions. Also the range of temperature to degradate the fiber was $338{\sim}385^{\circ}C$. These values indicated a fair stability. The improved net fiber can be used for raw material of bath, dish washing, oil and gas filter, and many kinds of decorations.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.71-85
• /
• 2014

To study biogeochemical characteristics and origin organic matter, sediment samples were taken from Site of 1249C and Stie 1251B of ODP Leg 204. Data of Rock-Eval, isotope, and element analysis generally indicate dominance of marine organic matter in sediments deposited under marine sedimentary environment. Only Rock-Eval data are somewhat different from those of others owing to under-maturation of organic matter. Samples of Site 1249C show high content of gas hydrate, whereas Site 1251B low content of gas hydrate in some intervals of the core. This result may be accounted to different location of two cores and presence of transportation passage (Horizon A, BSR 2) of thermogenic gas in the core, 1249 C. However, Site 1251B Located in the basin of low accumulation of gas hydrate is presumed to be limited in the gas hydrate production. Because not only transportation passage is limited to move thermogenic gas from the core, but also gas supply was not enough. Therefore, the biogenic gas that resulted from diagenesis of there sediment is superior.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.623-633
• /
• 2007

Stable isotope and biomarker analyses were carried out for the organic sediments from the exploratory wells in the Jeju Basin in order to understand the characteristics of organic matter. Organic matter in Geobuk-1, Okdom-1, JDZ VII-1 and VII-2 well is predominantly originated from land plants rather than marine algae according to carbon $({\delta}^{13}C_{org})$ and nitrogen $({\delta}^{15}N_{org})$ isotopic compositions. In the Geobuk-1, geochemical characteristics such as carbon $({\delta}^{13}C_{org})$, nitrogen ($({\delta}^{15}N_{org})$ and TOC contents are obviously changed by the depth 2,400 m, which is likely due to the change of origin of organic matter, sedimentary process or sedimentary environments. Analysis of the saturated fraction of the bitumen suggests the contribution of migrated oil to the indigenous bitumen from the samples 2,509, 2,833 and 3,163 m of the JDZ YII-1 and 3,253 m of the Geobuk-1 well. However, this characteristics can be derived from the contribution of the original organic matter. Based on the biomarker analysis, the samples from the Okdom-1 and Geobuk-1 appear to represent sedimentary organic matter of similar composition, that is rotatively immature, and which was probably deposited in the fluvio-deltaic setting with minor offshore marine influence. The samples from JDZ VII-1 appear to have been deposited in a more terrestrially dominated setting.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.105-121
• /
• 2013

This study introduces integrated approach on detection of a leakage in a sea wall based on remote sensing, electric resistivity survey, electromagnetic survey, and borehole survey for the Seosan A-Region sea wall. The satellite temperature distribution from Landsat ETM+ data identifies water leakage distribution and period by analyzing temperature mixing patterns between sea water and fresh water. Electric resistivity survey provides both horizontal and vertical anomaly distributions over the sea wall showing below average electric resistivity. Electromagnetic survey(electrical conductivity survey) reveals the potential possible leakage areas with minimal background impact by comparing electrical conductivity values between high and low tides. Borehole image processing system confirmed the locations of anomalies identified from the other survey methods and distributions of vertical fracture zones. The integrated approach identified 41.7% of the sea wall being the most probable area vulnerable to water leakage and effectively approximated both horizontal and vertical distribution of water leakage. The integrated analysis of remote sensing, electric resistivity survey, electromagnetic survey and borehole survey is considered to be an optimal method in identifying water leakage distribution, period, and extent of fractures knowledged from the boreholes.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.102-110
• /
• 2002

The chemical and mechanical characteristics of a new surface modifier, dichlorodimethysilane (DDMS, $(CH_3)_3SiCl_2$), for stiction-free polysilicon surfaces are reported. The main strategy is to replace the conventional monoalkyltrichlorosilane(MTS, $RSiCl_3$) such as octadecyltrichlorosilane (ODTS) or 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS) with dialkyldichlorosilane (DDS, $R_2SiCl_2$) with twit short chains, especially DDMS. DDMS, with shorter chains in aprotic media, rapidly deposits on the chemically oxidized polysilicon surface at room temperature and successfully prevents long cantilevers of 3 mm in length from in-use as well as release stiction. DDMS-modified polysilicon surfaces exhibit satisfactory hydrophobicity, long term stability and thermal stability, which are comparable to those of FDTS. DDMS as an alternative to FDTS and ODTS provides a few valuable advantages; ease in handling and long-term storage in solution, low temperature-dependence and low cost. In addition to the new modifier molecule, the simplified process of direct release right after washing the modified surface with isooctane was proposed to cut the processing time.

• Journal of Science Education
• /
• v.39 no.1
• /
• pp.15-27
• /
• 2015

This study investigated whether there was a difference of the change in perspective of the nature of science depending on subjects of the history of science, after designing for two kinds of topics of role play programs based on the history of science to be transformed into a modern perspective. Before the history of science-role plays, the degree of the modern perspective was statistically no difference between group I(the atomic model transition-role play) and group II(the Mendeleev's periodic table-role play). However after treatment of the history of science-role plays for the each group, the degree of group I was higher than the degree of group II in the modern perspective. The results of this study indicate that the degree of changes into modern perspective of the nature of science by performing a history of science-role play may be depend on the subject of the history of science combined with the role play, and suggest the possibility that may be more effective to change the nature of science into the modern perspective, in case of performing of role play based on the history of science that includes the scientific knowledge established by a number of scientists with time series.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.527-531
• /
• 2006

We have prepared organophilic inorganic particles and polyimide (PI) nanocomposite having excellent thermal stability and high dielectric constant that can be used for electronic application such as capacitor. We have chosen barium titanate (BT), a high dielectric constantmaterial and its surface was coated with nylon 6 to improve the affinity with PI. The FT-IR and TEM studies showed that the organophilic inorganic particle (BTN) has a polymer shell with thickness of 5 nm. We have suggested that it is possible to control the thickness of coating surface and also indicated the relationship between the ratio of inside and outside radius of BTN and the weight fraction of BT. The PI nanocomposite films based on poly(amic acid) and BTN were prepared by cyclodehydration reaction. The homogeneous dispersion of BTN in PI matrix was identified by using SEM. We have investigated the effect of BTN content on the coefficient of thermal stability, integral procedural decomposition temperature (IPDT), and dielectric constant of PI nanocomposite films.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.490-495
• /
• 1996

Low molecular weight linear chlorine terminated siloxanes (yields;71.2~86.5%) were prepared by reactions of cyclotri-, cyclotetra- and cyclopentasiloxane with dimethyldichlorosilane in the presence of pyridine N-oxide catalyst. The amine terminated siloxane oligomers were obtained in good yields(76.2~85.3%) by the reaction of linear chlorine terminated siloxanes with dimethylamine at $0^{\circ}C$. In this investigation, we have studied on the syntheses and properties of copolymers (yields;58.0~71.0%) obtained from the reaction of amine terminated siloxane oligomers with 1,4-bis(dimethylhydroxysilyl)benzene. The structures and properties of the copolymers were examined by FT-IR, $^1H$-NMR, TGA and DSC. Initial degradation temperatures($T_D{^i}$) of the polymer I and IV were confirmed as 476 and $485^{\circ}C$, respectively. The thermal stabilities of the polymers were found to be increased with increasing n of $(R_2SiO)_n$. The glass transition temperatures(Tg) of the polymers were increased with decreasing n of $(R_2SiO)_n$, and the lowest Tg revealed $-76^{\circ}C$ when n=5.