열교환기의 전열관군은 전열관군 외부로 흐르는 유동에 의해 유동 유발 진동이 일어나며 이것으로 말미암아 전열관군에서 파손을 야기할 수 있어서 열교환기의 구조적 안정성을 위해 열교환기의 전열관군에서 유동 유발 진동 특성을 규명할 필요가 있다. 일반적인 열교환기 전열관군에서 유동 유발 진동에 관한 실험적 연구는 기존에 많이 진행되어 오고 있으며 유동 유발 진동에 대한 무차원 PSD(Power Spectral Density) 함수를 무차원 주파수인 Strouhal 수, fU/U의 함수로 도출된 실험적 결과들이 도출되어 있다. 본 연구는 열교환기 단일 원관에서 유동 유발 진동에 관한 기존의 연구들의 결과를 전산유체해석을 통해 검증하고 배열회수 보일러의 전열관군의 유동 유발 진동 특성에 적용하기 위한 기반을 마련하는 것을 목적으로 한다. 이러한 것을 위해 단일 원관에서 비정상 상태 유동해석을 수행하여 주기적인 와동 발생 특성과 원관에서의 양력과 항력의 변화 특성을 살펴보았다. 또한 원관에서 양력과 항력의 변동 특성으로부터 유동 유발 진동에 따른 PSD 특성 결과를 도출하여 기존의 연구들과 비교를 통해 원관 주위의 PSD 특성을 살펴보았으며 양력과 항력의 진폭과 주파수의 특성을 규명하였다.
경상남도 일광지역의 각력파이프형 구리(Cu)광상은 화강암질암 성분의 암주내에 배태되어 있으며, 모암인 화강암질암은 변질되어 있다. 암흑색의 전기석은 각력파이프를 중심으로 교대 후광을 형성하면서, 석영, 황동석, 유비철석, 자류철석, 방연석, 반동석등과 함께 각력파이프내의 모암인 화강암질암 각력들사이의 기질부를 충전하면서 광맥을 형성하거나, 모암인 장석, 흑운모를 치환교대하면서 산출된다. 각력내(광맥)에서 형성된 전기석은 조립에서 세립질의 자형으로, 침상 내지 깃털 모양으로 산출되며, 다색성 체계는 대체로 짙은 청색과 녹색을 나타낸다. 변질된 모암에서 산출되는 전기석은 타형이며, 등립질의 이차 (secondary) 석영과 함께 방사상의 연정을 이루는 것이 특징적으로 관찰된다. 전기석은 Fe성분이 풍부한, 흑색의 스코올(schorl)(80mol% schorl relative)이며, 비교적 단순한 화학조성을 갖는다. 전기석의 누대구조에 따른 조성 변화는 전기석결정 후기단계에 Fe와 Ca 성분이 증가했음을 나타낸다. 이러한 화학성분의 변화는 Ca에 의한 Na치환, Fe$^{3+}$ 에 의해 Al이 치환되어진 우바이트(uvite)치환(Ca(Fe,Mg)NaAl$_{-1}$)과 페리스코올(ferrischorl)치환 (Fe$^{3+}$ Al$_{-1}$)에 의한 것으로 해석된다. 페리스코올치환이 있었다는 것은 전기석을 침전시킨 열수의 산화상태(oxidation state)가 높아진 것을 반영한다. 이러한 높아진 산화환경은 열수의 비등에 의해 H$_2$ 성분이 열수에서 제거되어져 형성되어졌다. 또한 열수의 비등에 의한 산성(acidic) 휘발성성분 제거는 열수의 pH를 높여 경제성 있는 황화광물의 형성을 용이하게 했다 일광전기석의 산출상태와 지구화학적 특성은 이곳의 전기석은 마그마에서 용리되어진 열수가 각력파이프를 통해 대규모로 이동되어 형성된 생산물이며, 마그마에서 산성성분의 유체가 용리되어 산성열수체계를 형성하고 난 후, 전기석의 침전이 시작되었음을 보여준다 광화대와 변질대를 형성한 일광의 열수체계는 마그마(orthomagmatic), 심부(hypogene) 기원의 열수에 의해 형성되어졌음을 나타낸다.
본 연구에서는 단면설계 및 열 교환 장치 위치 변경을 통해 온실의 구조 변경을 진행하였으며, 선행연구를 통해 개발된 모델을 근간으로 하여 개선 여부에 따른 온실 내부 환경을 예측하였다. 단면형상과 열 교환 장치의 개선 후 유속 변화에 따른 시뮬레이션 분석을 진행하였으며, 이 때 온도와 균일도는 각각 평균 0.65℃, 0.75%p 상승함을 확인하였다. 해석대상 온실과 같은 소규모 온실의 경우 방열관의 난방성능 개선보다 FCU에 의해 형성되는 공기 유동이 균일한 환경 조성에 더 큰 영향을 미치는 것으로 판단된다. 개선 전·후 온실에 환기시스템 적용 시 공기 유동 특성 분석을 위해 시뮬레이션 분석을 진행하였다. 공기 유동과 공기령은 유사한 분포를 보였으며, 개선 후 온실의 공기령이 개선 전 온실 대비 18초낮게 나타났다. 개선 전·후 온실 시뮬레이션 분석 결과 전체적으로 개선된 온실에서의 평균온도 및 온도 균일도 상승, 최대편차 감소 등 내부 환경의 균일성이 향상됨을 확인하였다. 선행연구로 개발된 모델은 형상 변경, 열 교환 장치 위치 변경 등에 따라 변화하는 온실 내부 환경을 예측할 수 있음을 확인하였으며, 온실 설계, 온실 내 난방시스템 설계 등의 분야에 적용 가능할 것으로 판단된다.
겨울철 벤로형 유리온실(W59×L68×H5.9m) 보온스크린 높이의 차이에 따른 실내온도 변화를 파악하기 위하여 00시부터 04시까지 30분 간격으로 열유동해석을 하였다. 초기에는 상대적으로 난방 외부접촉면적이 큰 보온스크린 설치높이 5.9m에서 보온스크린 설치높이 4.1m에 비해 온도감소가 빨라 낮은 온도를 나타냈으나 해석 2시간 이후부터는 상대적으로 온도감소가 느렸고 04시에는 0.6℃ 높았다. 그러나 해석시작1시간 후 실내온도가 약13℃까지 내려가고, 그 이전에 난방기가 작동해야 된다고 볼 때, 해석 2시간 동안 온도감소가 상대적으로 느렸던 보온스크린 설치높이 4.1m에서 5.1m에 비해 난방에너지 절감에 유리할 것으로 판단되었다. 토마토가 자라는 지면 2m 높이에서의 유동은 보온스크린 설치높이 5.9m에서 4.1m에 비해 상대적으로 넓고 빨랐으며 유동해석 1시간 후인 01시의 평균차이는 0.034m·s-1였다. 여름철 차광스크린 설치높이를 5.7m와 3.9m로 달리하되70%닫힘 조건에서 12시부터 13시까지는 온실하부덕트 외부공기유입량 0.67㎥·s-1 상태 그 후부터는 외부 유입공기를 3배로 증가하여 냉방효과를 비교하였다. 초기 12시부터 13시까지는 차광스크린 70%닫힘 상태에서 무차광에 비해 오히려 평균 약0.9℃ 높았지만 외부공기유입량이 증가하는 13시 이후 부터는 차광스크린 70%닫힘 조건에서 온도가 감소하였고 14시 30분에는 무차광에 비해 0.5℃ 낮았다. 차광스크린 70% 닫힘 조건에서 바닥면의 온도분포는 스크린 설치높이와 개방 정도에 비례하여 낮았으며 무차광에 비해 8℃이상 낮았다. 온실 내 상대습도는 차광스크린을 30% 개방하는 조건에서는 차광스크린의 높이나 개방정도에 따른 차이가 미미하였다.
제주도 현무암에 포획된 첨정석 레졸라이트 포획암은 비교적 뚜렷하게 구별되는 세 종류의 조직으로 산출된다. 즉, 조립질의 프로토그라뉼라 조직, 쌍봉의 입자분포를 보이는 포피로클라스틱 조직, 그리고 세립질의 입자들이 신장되어 엽리를 보이는 마일로니틱 조직의 포획암으로 구별된다. 이들 조직은 프로토그라뉼라에서 포피로클라스틱, 마일로니틱 조직으로 가면서 입자크기는 점점 감소하고, 입자의 경계는 더욱 직선화되며, 삼중점이 더 빈번하게 산출되는 경향을 보인다. 특히 포피로클라스틱 및 마일로니틱 조직의 포획암은 킹크밴드를 가지는 거정의 반상쇄정(2-3 mm) 사이에 변형의 흔적이 없는 세립질의 입자($200-300\;{\mu}m$)로 구성되어 있으며, 반상쇄정 내 용리엽리가 구부러져 있는 조직적 특징을 보인다. 또한 프로토그라뉼라 조직에서 첨정석은 사방휘석과 항상 같이 접촉되어 산출되지만 마일로니틱 조직에서는 사방휘석과 관계없이 단독으로 뿌려져 산출되는 특성을 보인다. 이러한 조직적 특성은 포획암이 특정한 편압 하에서 동력재결정작용과 열에 의한 정적재결정작용을 경험하였음을 반영하고 있다. 첨정석 레졸라이트 포획암을 구성하고 있는 감람석, 사방휘석, 단사휘석의 mg#[$=100{\times}Mg/(Mg+Fe_t)$]는 입자의 크기나 조직적 차이와는 상관없이 거의 일정하다(Ol: 88-91, Opx: 89-92, Cpx: 90-92). mg#의 값, 감람석의 NiO (0.3~0.4 wt%)와 MnO (0.1~0.2 wt%)의 조성은 세계 다른 곳의 맨틀 레졸라이트 포획암내 감람석의 값과 유사하며, 20~25%의 부분용융을 경험한 잔류맨틀임을 나타내고 있다. 미량원소 및 희토류원소 조성은 주성분원소 조성에 비해 프로토그라뉼라, 포피로클라스틱, 마일로니틱 조직 사이에 좀 더 뚜렷한 차이를 보여주면서 미량원소 조성과 조직적 특성사이에 밀접한 관련성이 있음을 나타내고 있다. 첨정석 레졸라이트 포획암의 단사휘석과 사방휘석의 미량원소 및 희토류원소함량은 프로토그라뉼라에서 마일로니틱 조직으로 갈수록 증가하고 있으며, 특히 LREE와 불호정성이 큰 미량 원소일수록 현저하게 증가하는 경향을 나타낸다. 이는 첨정석 레졸라이트 포획암이 부분용융을 경험한 이후 LREE가 부화된 멜트 또는 유체에 의한 교대작용을 받았으며, 변형사건과 교대작용사이에 밀접한 관련성이 있음을 의미한다. 노두에서 관찰되는 조직의 상대적 산출비율이 이들 포획암이 기원된 상부맨틀에서의 상대적 산출비율이라고 가정한다면, 포피로클라스틱 및 마일로니틱 조직을 발달시킨 변형사건은 비교적 좁은 전단대 지역에 한정되었을 것으로 제시된다. 이러한 전단대는 제주도 아래 암석권질 상부맨틀에서 LREE가 부화된 멜트 또는 유체가 침투하기에 용이한 환경을 형성하였을 것이다. 마일로니틱 조직에서 더욱 현저하게 나타나는 미량원소부화특성은 입자의 크기가 작아지고 변형의 강도가 높을수록 멜트 또는 유체의 침투가 더욱 용이했기 때문일 것으로 해석된다.
A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.
A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.
본 연구는 바람통로의 세밀도와 편이성을 향상시켜 도시 녹지계획 활용도를 높이는 것을 목적으로 한다. 이를 위해 유체역학적 거칠기 특성을 나타내는 거칠기길이($z_0$)로부터 바람통로 네트워크 추출기법을 제안하였다. 지적필지 단위로 산출된 $z_0$에 IDW, Spline, Kriging 내삽기법을 적용해 표면이 연속적인 수치거칠기길이모델(DZoM)을 생성한 후 수계망 추출 기법을 적용해 바람통로 네트워크를 산출하였다. 내삽기법 적용 결과들을 비교하여 가장 적합한 내삽 기법을 정하고 산출된 바람통로와 토지피복 및 지표온도의 공간적 관계를 분석하였다. 연구결과 DZoM 산출기법 중 Kriging 기법의 적용성이 IDW 및 Spline 기법보다 우수한 것으로 나타났다. Kriging 기법을 이용하여 선형 추출한 바람통로 네트워크(Type B)와 Landsat-7 ETM+에서 산출한 여름철과 겨울철 야간 지표온도 분포를 비교한 결과는 공간적 일치도가 높았다. 주목할 부분으로 산출된 바람통로의 흐름이 도시의 야간 열 부하들을 완화하는 것으로 보인다. 추출된 바람통로 네트워크 사상들(features)에 대한 엄밀한 평가와 개선이 수행된다면 녹지계획 실무에 효과적으로 활용될 수 있을 것이다. 이를 위해서는 (1) 거칠기길이 개선, (2) 녹지계획 목적에 맞는 바람통로의 해석 및 편집, (3) 분절된 바람통로 네트워크 연결, (4) 관련 자료의 상세한 구축 및 무결성 확보 등이 선행되어야 할 것이다. 제안된 바람통로 네트워크의 녹지계획 적용을 위해 향후 연구범위를 수도권으로 확장할 계획이다.
자동차 엔진이나 소각로 등의 연소기기에서 질소산화물을 저감하기 위한 여러 가지 방법 중에 배기가스 재순환 방법이 널리 쓰이고 있다. 본 연구에서는 고온의 배기가스를 재순환 유입하기 위해 벤튜리 튜브를 사용할 경우에 상온의 공기 노즐 출구 위치를 변화하여 고온의 배기가스를 재순환 유입하는 최적 위치를 도출하기 위해 전산 열유체해석을 통해 살펴보았다. 또한 상온의 공기 노즐 출구에 원뿔을 설치한 경우에 대한 배기가스 재순환 유입량 특성을 고찰하였다. 공기 노즐 출구 위치를 배기가스 재순환 유입 출구의 시작위치(z=0)에서 끝 위치(z=0.6m)로 변화하였을 때 유선과 온도 분포 변화를 관찰하였으며 배기가스 재순환 유입량비와 혼합가스 출구의 평균온도로 정량적으로 비교하였다. 본 연구를 통하여 상온의 공기 노즐 출구 위치는 z=0.15m(1/4L)에서 재순환 유입량과 출구에서의 평균온도가 가장 최대가 되는 것을 알 수 있었다. 또한 공기 노즐 출구에 원뿔을 설치하면 공기 노즐 출구의 속도가 증가하여 배기가스 재순환 유입량이 약 2배 증가하고 혼합가스 출구 온도도 $116^{\circ}C$ 증가하는 것을 알 수 있었다.
함암모늄 2:1 점토광물 내 암모늄 거동과 질소동위원소 특성을 살펴보기 위해 일본 남서부 해저 와카미코 화구(Wakamiko crater) 내 열수가 분출하는 두 지점에서 퇴적물 코어를 채취하여 스멕타이트로 대표되는 점토입자를 추출하였다. 점토입자 내 무기탄소 제거 후 순차적인 유기물 분해과정에서 감소하는 탄소-질소 비에 근거하여 무기질소 함량을 추정한 결과, 전질소에 대한 무기질소 비율은 SES 지점(Core#1093MG: av. 11.5%)에 비해 SWS 지점 (Core#1094MR: av. 18.2%)에서 높은 경향을 보였다. 후자에서 높은 광물 결정도를 보인 점은 상대적으로 진전된 광물화와 함께 교환성 암모늄이 비교환성 암모늄으로 전환된 결과로 해석된다. 단계적인 점토입자 내 교환성 암모늄의 제거과정에서 나타난 질소동위원소 조성 변화(SES 지점: Core#1093MG: -4.4 ~ +0.2 ‰, av. -2.4 ‰; SWS 지점: Core#1094MR: -0.7 ~ +3.0 ‰, av. +1.5 ‰)로부터 심부 마그마에서 비롯된 열류 및 열수에 의한 국부적인 온도변화는 함암모늄 2:1 점토광물의 형성에 관여한 유체 내 용존 암모늄과 암모니아 사이에서 질소동위원소 분별을 야기했을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.