• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.531-537
• /
• 1995

본 논문에서는 증기폭발의 전파과정을 해석하기 위한 수학적 모델을 제시하였다. 이 모델은 용융물, 용융파편, 그리고 냉각재 기상과 액상 둥 4상 유체의 2차원적인 천이거동을 지배방정식 및 관련상관식의 수치적 해를 구함으로써 증기폭발의 전파속도 및 폭발압력 등을 예측할 수 있다. 모델에 사용된 주요 상관식은 용융물 분쇄, 냉각재 상변화, 에너지 교환, 그리고 운동량 교환함으로 구성되어 있다. 냉각재의 상태를 결정하는데 있어서 냉각재의 기상과 액상 사이의 열역학적인 비평형을 허용할 수 있도록 냉각재의 상태방정식을 구성하였다. 주석/물의 증기폭발에 대한 예제계산을 수행한 결과 폭발의 전파속도 및 압력 등에 있어서 합당한 것으로 밝혀졌다. 또한 중요한 초기변수(중기 분율, 용융물 분율) 및 관련상관식에 대한 민감도 분석을 수행함으로써 모델개선을 위한 중요인자를 제시하였다.

• Journal of Wetlands Research
• /
• v.14 no.1
• /
• pp.75-87
• /
• 2012

Hyporheic zone is a region beneath and alongside a stream, river, or lake bed, where there is mixing of shallow groundwater and surfacewater. Hyporheic exchange controls a variety of physical, biogeochemical and thermal processes, and provides unique ecotones in a aquatic ecosystem. Field and experimental observations, and modeling studies indicate that hyporheic exchange is mainly in response to pressure gradients driven by the geomorphological features of stream beds. In the reach scale of a stream, pool-riffle structures dominate the exchange patterns. Flow over a pool-riffle sequence develops recirculation zones and stagnation points, and this flow structures make irregular pressure gradient which is driving force of the hyporheic exchange. In this study, 3 D hydro-dynamic model solves the Reynolds-averaged Navier-Stokes equations for the surface water and Darcy's Law and the continuity equation for ground water. The two sets of equations are coupled via the pressure distribution along the interface. Simulation results show that recirculation zones and stagnation points in the pool-riffle structures dominantly control the upwelling and downwelling patterns. With decrease of recirculation zones, length of donwelling zone formed in front of riffles is reduced and position of maximum downwelling point moves downward. The numerical simulation could successfully predict the behavior of hyporheic exchange and contribute the field study, river management and restoration.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.358-366
• /
• 2004

The bridged disulphato complex $[Cr_2(NH_2)_2(H_2O)_2(SO_4)_2]{\cdot}2H_2O$, terminal triisocyanato $[Cr(NCO)_3(H_2O)]{\cdot}3H_2O$ complex and limonite, $[FeO(OH)]{\cdot}0.2H_2O$ compound were prepared by the reaction of $Cr_2(SO_4)_3{\cdot}xH_2O, Cr(CH_3COO)_3$ and $Fe_2(SO_4)_3$, respectively, with urea in aqueous media at $80^{\circ}C$. The infrared spectra of the products indicate that the absence of the bands of urea, but shows the characteristic bands of coordinated amide, water, bridged sulphato and isocyanato groups. Thermogravimetric (TG) and differential thermal analysis (DTA) measurements on the complexes are also recorded. The data obtained agree quite well with the expected structures. A general mechanisms describing the formation and its thermal decomposition of the complexes are suggested.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.235-242
• /
• 2015

A commercially available copper mesh was investigated as an iodine off-gas capturing medium for pyroprocessing, with an aim to replace costly silver based adsorbents. Theoretical calculation results suggested that the reaction between metallic copper and gaseous iodine will occur spontaneously to produce copper iodide in the temperature range of 100 ~ 500℃. The effect of the reaction temperature on iodine capturing efficiency was investigated by experimentation, and it was found that 5 and 6 wt% of iodine (initial mass 2.0 g) was captured by a single copper mesh (0.26 g) at 300 and 400℃, respectively. The repeated experimental results also suggested that copper utilization can be increased with the help of the spontaneous detachment of the reaction product (CuI) from a copper mesh. The formation of the CuI phase was confirmed using the X-ray diffraction technique, and the surface morphology of the reaction product was observed using scanning electron microscopy.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1996

The binary phase equilibrium experiments of carbon dioxide/1,2,3,4 ${\alpha}$-tetrahydro-1-naphthol(${\alpha}$-tetralol) system were conducted to get phase equilibrium and mixture density data at 313.2K, 343.2K and 373.2K and within pressure ranges of 6.0 MPa to 35.0MPa. The phase equilibrium apparatus was type that circulated the vapor and liquid phase, the expended volume measuring system was adopted to microsampling technique for the analysis. The phase equilibrium and mixture density data were obtained for carbon dioxide/${\alpha}$-tetralol system from liquid and vapor phase. The mole fraction of carbon dioxide in liquid phase decreases and the mole fraction of ${\alpha}$-tetralol in vapor phase increases at constant pressure according to increment of temperature, and both the densities of the vapor and liquid phase approach to the mixture critical density as the pressure increases at any temperature. For she thermodynamic analysis, the experimental data were correlated with Peng-Robinson equation in cubic equation of state and compared to theoretical values of carbon dioxide/${\alpha}$-tetralol system. The AAD result was in the range of 1.08%~8.93% in the case of K(1), and was in the range of 45.71%~72.34% in the case of K(2).

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.645-661
• /
• 2013

The synoptic, thermodynamic, and dynamic characteristics of a heavy snowfall event that occurred in Seoul metropolitan area on 27 to 28 December 2010 was investigated. During this period there was a distinctive case that was identified as a polar low. We analyzed surface and upper level weather charts, snowfall amount, sea surface temperature, satellite imagery, sounding, and the National Center for Environmental Prediction global $1^{\circ}{\times}1^{\circ}$ reanalysis data. The polar low developed in an area where there was strong baroclinicity in the lower level aided by strong conditional instability due to 925 hPa warm air advection and 700 hPa cold air advection. The development mechanism of polar low is due, in part, to the tropopause folding, which advected stratospheric air increasing potential vorticity in mid-level and inducing cyclonic vorticity and convergence in low-level. Eventually clouds developed and there were snowfall total of 10 cm in Seoul metropolitan area and as much as 20 cm in southern parts of Korea. During the snowfall development, there was a $-45^{\circ}C$ cold core at 500 hPa and shortwave maintained $3-5^{\circ}$ separation with surface trough, which favored the development of polar low located in the warm sector and cyclonic advection area. The height of the dynamical tropopause lowered to 700 hPa during the peak development and increase in potential vorticity allowed strong vertical motion to occur. Overall, there was a close relationship between the development of snowfall and tropopause undulation. The heaviest snowfall occurred east of the tropopause folding where strong cyclonic vorticity, vertical motion, and moisture advection all coincided while the polar low was passing through the Korean peninsula.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.581-588
• /
• 2018

In this article, electrochemical investigation of the transfer reaction of ionizable cefotiam (CTM), an antibiotic molecule across a polarized water/1,2-dichloroethane (water/1,2-DCE) interface was studied. Ion partition diagram providing the preferred charged form of CTM in either water or 1,2-DCE phase was established via the voltammetric evaluation of the transfer process of differently charged CTM species depending upon the pH variation of aqueous solutions. Thermodynamic information including the formal transfer potential and formal Gibbs transfer energy values in addition to important pharmacokinetics including partition coefficients of ionizable CTM were also evaluated. In particular, the current associated with the transfer of CTM present at pH 3.0 aqueous solution proportionally increased with respect to the CTM concentration which was further used for developing CTM sensitive ion sensor. In order to improve the portability and convenient usage, a single microhole interface fabricated in a supportive polyethylene terephthalate film was used of which hole was filled with a polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel replacing 1,2-DCE, a toxic organic solvent. A dynamic range of $1-10{\mu}M$ CTM was obtained.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.65-72
• /
• 2016

ORC system was designed and constructed for utilizing the heat of the exhaust gas and coolant released from the gas engine which was modified to use natural gas as a fuel. In this paper the components of the ORC system were designed and manufactured based on measured data of the gas engine. The components are composed of two plate heat exchanger, the 5kW-class expander and multi stage centrifugal pump. The thermodynamic performance of the ORC system was analyzed by using the electric heater. Also, the developed ORC system was implemented to modified natural gas engine. Two gas engines were used to supply heat to the ORC system. As a result of test bench, when the heat source temperature is $110^{\circ}C$ expander shaft power, the pressure ratio and cycle efficiency is 5.22kW, 7.41, 9.09%. As a result of field test, when the heat source temperature is $86^{\circ}C$ expander shaft power, the pressure ratio and cycle efficiency is 2kW, 3.75, 6.45%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.73-77
• /
• 2024

The spinel-type oxide (Ni_x, Mn_y, Co_3-x-y)O₄ (NMC) is widely utilized as a material for temperature sensors with a negative temperature coefficient (NTC), finding applications across various industries including electric vehicle battery management systems. Typically, NMC is manufactured using solid-state reaction methods employing powders of Ni, Mn, and Co compounds, with the densification process through sintering recognized as a crucial factor determining the electrical properties of the temperature sensor material. In this study, NMC pellets were synthesized via solid-state reaction and their crystallographic and microstructural characteristics were investigated. Also, the activation energy for densification behavior during the sintering process was determined. According to the analysis results, the room temperature resistance of the NMC pellets was measured at 10.03 Kohm, with the sensitivity parameter, B-value, recorded at 3601.8 K, indicating their potential applicability as temperature sensors across various industrial fields. Furthermore, the activation energy for densification was found to be 273.3 ± 0.4 kJ/mol, providing valuable insights into the thermodynamic aspects of the sintering process of the NMC.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.2
• /
• pp.96-114
• /
• 2000

춘천 연옥은 색깔에 따라 세가지 유형 (연녹색, 암녹색, 및 회색 연옥)으로 구분되고 이들은 각기 서로 다른 조직과 조성을 나타낸다. 연녹색 연옥이 이중에서 가장 일반적인 유형이다. 연옥은 주로 극미립의 연옥질 투각섬석으로 구성되고 여기에 미량의 휘석, Mg-녹니석 및 방해석이 불순물로서 수반된다. 연옥질 투각섬석 결정들은 그 폭이 5$\mu\textrm{m}$ 이하의 극미립질 침상 결정형을 이루며 서로 치밀하게 얽혀있는 연옥 특유의 조직을 나타낸다. 주사전자현미경 하에서 (110)의 벽개면의 발달이 현저하고, 주사탐침현미경 하에서는 벽개면을 가로지르는 방향으로 특징적인 조선이 나타나는 것이 특징이다. 연옥질 투각섬석은 투과전자현미경 하에서 흔히 단쇄형과 복쇄형이 결합한 3중쇄형 격자가 복쇄형의 투각섬석 구조 내에서 불규칙적으로 협재되는 혼성격자 구조가 발달하는 것이 특징이다. 드물지만 5중쇄형 격자와 4중쇄형 격자도 관찰되는데, 이 같은 불규칙한 격자 혼재상은 회색 연옥에서 보다 현저한 경향을 보인다. 이와 같은 혼성격자 구조형의 존재는 춘천 연옥이 열역학적으로 비평형 상태에서 형성되었음을 시사하는 것으로 여겨진다. 리트벨트법에 의한 구조검증을 통해서 구해진 연옥질 투각섬석들의 격자상수 값들은 X-선회절의 경우, a=9.837(1)~9.9804(4)$\AA$, b=18.046(2)~18.062(1)$\AA$. c=5.2765(7)~5.2803(3)$\AA$, $\beta$=104.717(9)~104.786(3)$^{\circ}$로 계산되었다. 이에 비해서 중성자 회절법에 의해서 측정되 격자 상수 값은 a=9.8841(6)~9.8933(7)$\AA$, b=18.1429(7)~18.161(2)$\AA$, c=5.3024(3)~5.3060(7)$\AA$, $\beta$=104.698(7)~104.771(4)$^{\circ}$로서 X-선회절에 의한 값들과 약간의 차이를 보인다. 연옥질 투각섬석은 Ca에 대한 Mg의 치환에 의해 M(4) 자라의 크기가 작아지면서 b축의 단위포도 함께 줄어드는 결정화학적 특징을 나타낸다. 이는 중성자 회절분석에 의해서 구해진 M(4)의 자리점유율과 M(4)-O의 원자간 거리에 의해서도 확인된다. 그러나 연옥질 투각섬석에 대한 리트벨트법에 구조검증 결과는 연옥의 유형별 미시적 광물상과 혼성격자 구조형의 특징에 별다른 연계성이 없는 것으로 나타났다.