• Journal of Industrial Technology
• /
• v.9
• /
• pp.119-125
• /
• 1989

Lennard-Jones 유체 혹은 거의 구형에 가까운 분자들의 혼합물의 열역학적 성질을 예측하기 위한 용액이론이 유도되었다. 이 이론에는 에너지와 분자직경에 대한 두 개의 변수가 존재하며, 강구(hard sphere)를 중심으로 하여 동경함수(pair distribution function)를 확장시키는 교반이론(perturbation theory)에서 1/kT에 대한 일차와 이차계수의 관계로부터 얻어지는 혼합법칙을 이용하는 HSE이론과 달리 Orstein-Zernike결과와 일치되는 분자직경 변수를 먼저 구한 다음, 일차계수와 함께 얻어진 혼합법칙이 유도되었다. 이 방법으로 위 유체들의 혼합물에 적용시켰을 때, 원래의 HSE나 vdW-1의 방법보다 좋은 결과의 열역학적 성질을 예측할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.252-255
• /
• 2005

The operation of a gas-turbine engine gradually deteriorates the performance of its main components and often generates the defects of its components. The GPA method has been usually used for the diagnosis of the deterioration. In this study, the diagnostic code of the engine performance using the thermodynamic sensitivity between the sensed parameters and the health parameters has been developed without an application of the commercial program. The single performance deterioration of the turbo-shaft engine for SUAV has been estimated with this code.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.100-109
• /
• 2017

이번 연구에서 우리는 궤적 앙상블을 이용해 1 차원 Ising 모형의 동역학적 상전이를 관측했다. s 앙상블이라고도 불리는 궤적 앙상블은 활성도의 켤레 변수를 도입해 활성도에 편중을 두어 궤적을 추출한 앙상블이다. 평형상태에 있는 1 차원 Ising 모델에서는 외부 자기장이 존재하지 않을 때 상전이가 나타나지 않는다. 하지만 s 앙상블을 통해서 우리는 1 차원 Ising 모형에서 동역학적 상전이가 존재한다는 사실을 발견할 수 있었다. 이동역학적 상전이는 유한 크기 조정 법칙이 잘 적용되며 2 차원 Ising 모형과 같은 보편성 등급을 가진 것을 통해 두 상전이가 서로 연관되어 있다는 것을 알 수 있었다. 또한 열역학적 함수인 에너지와 동역학적 함수인 활성도 사이에 선형관계가 존재하는 점을 통해 동역학적 함수와 열역학적 함수 사이의 관계가 존재하는 것을 확인했다. 마지막으로 또 다른 열역학적인 함수인 자화도에 편중을 두었을 때 동역학적 상전이가 일어나는 임계점이 이동하는 것을 통해 에너지 외의 다른 열역학적 함수도 동역학적 함수와 연관된다는 것을 알아냈다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.289-292
• /
• 2005

Because of accumulation of operation time, the performance of main components(compressor, combustor, turbine, etc.) come to be deteriorated in gas-turbine engine. So, high reliability and minimun of expense are important problem for engine manufacturer and user in operation of gas-turbine engine. In this study, the diagnostic code of the engine performance using the thermodynamic sensitivity between the sensed parameters and the health parameters has been developed without an application of the commercial program. The single performance deterioration of the turbo-shaft engine has been estimated with this code.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.203-214
• /
• 2002

The statistical model was introduced to satisfy various experimental condition on the sorption of heavy metals (Pb, Cu, Cd, and Zn) by bentonite. The Box-Behnken model designed statistically was applied to determine relative impact among three variables such as pH, HCO$_3$ contents and heavy metal concentrations on the sorption. The SAS program was used to obtain the statistical solution. The statistical surface response analysis indicates that initial concentration of heavy metals and pH have an important effect on the sorption, and bicarbonate is not a serious variable. The sorption capability about heavy metals of bentonite is in the order of Pb>Cu>Zn>Cd. The precipitation as hydroxyl and carbonate complexes of heavy metals was thermodynamically analyzed as major mechanism of sorption under alkaline pHs and high bicarbonate solution. It was found that there is a little difference between the model prediction on the precipitation of heavy metals and the results of batch sorption experiment. The thermodynamic data of the programs have to revise to obtain the best fit condition between the model prediction and the experimental results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.80-83
• /
• 1999

Processing of thin films by chemical vapor deposition(CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit of the substrate temperature for a diamond deposition is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD porcess variables.

• Nuclear Engineering and Technology
• /
• v.22 no.1
• /
• pp.29-35
• /
• 1990

Uranium solubilities have been calculated for a range of conditions expected in a nuclear waste disposal repository. Variables taken into consideration include the pH and Eh range expected for deep groundeaters, the effect of the composition of groundwater. The model used in these calculations is based on the assumption of chemical equilibrium. Calculations show that the major variables influencing uranium solubility under the repository conditions are pH and Eh. The results of this study can be applied to an assessment of the nuclear waste disposal.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.101-109
• /
• 2002

A complex chemical equilibrium analysis was performed to study the hot-wall CVD process of the SiC/C functionally gradient materials (FGM). Thermochemical calculations of the Si-C-H-Cl system were carried out, and the effects of process variables(deposition temperature, reactor pressure, C/[Si+C] and H/[Si+C] ratios in the source gas) on the composition of deposited layers and the deposition yield were investigated. The CVD phase diagrams of the SiC/C FGM deposition were obtained, and the optimum process windows were estimated from the results.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.179-192
• /
• 1992

An elasto-plastic-damage constitutive model for ductile materials was derived under the framework of thermodynamic approach of contimuum damage mechanics(CDM) in which internal irreversible thermodynamic change of micro-structure of materials such as plastic deformation and damage evolution were considered as thermodynamic state variables. New constitutive model can predict not only the elasto-plastic behaviors but also the sequential degradation process of ductile materials more rationally.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.75-80
• /
• 2014

The past several years have seen a substantial growth in mathematical modeling activities whose interests are to describe the performance, efficiency and emissions characteristics of various types of internal combustion engines. The key element in these simulations of various aspects of engine operation is the model of the engine combustion process. Combustion models are then classified into three categories: zero-dimensional, quasi-dimensional and multidimensional models. zero-dimensional models are built around the first law of thermodynamics, and time is the only independent variable. This paper presents a introduction to the combustion characteristics of a spark ignition combustion modeling by zero-dimensional model.