• Title/Summary/Keyword: 열시차 분석

Search Result 224, Processing Time 0.057 seconds

Analysis of Groundwater Recharge Characteristics Using Relationship between Rainfall and Groundwater Level (강우량과 지하 수위를 이용한 지하수 함양특성 분석)

  • Lee, Dong-Ryul;Gu, Ho-Bon
    • Journal of Korea Water Resources Association
    • /
    • v.33 no.1
    • /
    • pp.51-59
    • /
    • 2000
  • A dynamic model, which combined time series model with distributed-lag model, is applied to understand the relationship between rainfall and groundwater level. In the model, rainfall with distribution lags and past groundwater level as a dependent variables were used to estimate present groundwater level. The distribution of the lagged rainfall effects for groundwater levels was modeled by Almon polynomials. The model was applied to Banglim and Tanbu groundwater stations in Pyungchang river and Bocheong stream watershed which are representative basins for International Hydrological Program (IHP). The dynamic model represents observed groundwater levels very well and can be used to predict the levels. The model parameters reflect hydraulic characteristics of aquifer. In addition, from the parameters it appears that the increase in groundwater level due to rainfall takes place significantly within first two days of the rainfall event. The rainfall of the order of 18mm/day and 30mm/day at Banglim and Tanbu, respectively, had no significant effect on the groundwater levels.

  • PDF

An Experimental Study on Measurement of the Reaction Order of a Liquid Fuel with Various Components (혼합 액체연료의 화학반응차수 계측에 관한 실험적 연구)

  • Choi, Hyo-Hyun;Lim, Jun-Seok;Kim, Chul-Jin;Sohn, Chae-Hoon
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.04a
    • /
    • pp.421-424
    • /
    • 2011
  • Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.

  • PDF

Differential Thermal Analysis and Quantum Chemical Consideration for Catalytic Stability of Ion Exchanged Faujasite Type Zeolite 1. Ni2+-Faujasite계 (이온교환된 Faujasite형 제올라이트의 촉매적 안정성에 대한 시차열분석 및 양자화학적 고찰; 1. Ni2+-Faujasite계)

  • Kim, Myung-Chul;Kim, Jong-Taik
    • Applied Chemistry for Engineering
    • /
    • v.4 no.1
    • /
    • pp.75-81
    • /
    • 1993
  • The thermochemical stability of $Ni^{2+}-faujasite$ was studied by differential thermal analysis(DTA), thermal gravitational analysis(TGA), X-ray diffraction analysis(XRD) and quantum chemical calculations. Dehydration of $Ni^{2+}-faujasite$ was observed at 373-773K. A CNDO/2 calculations have been applied on cluster models for the representative T sites in faujasite to get total energy and wiberg bond orders. It has proved that the decrease of zeolitic crystallinity is directly related to the weakening of Al-O bonds in framework.

  • PDF

Thermoanalytical Measurements of Shocked Alumina Powder (폭발 충격을 받은 Alumina 분말의 열분석)

  • 김종희
    • Journal of the Korean Ceramic Society
    • /
    • v.14 no.3
    • /
    • pp.178-181
    • /
    • 1977
  • 급격하게 충격을 받은 Linde A alumina분말에 대해서 동적시차열량 계법(dynamic differential calorimetry)으로 잔류응력 energy를 촉정 조사하고 투과전자현미경으로 결함구조를 조사하였다. 충격을 받지않은 alumina분말과 비교해 보면 충격을 받은 분말을 대개 80$0^{\circ}C$ 내지 120$0^{\circ}C$범위에서 energy 방출을 보여 주었으며, 충격을 받은 대다수의 $\alpha$-alumina결정들은 변형으로 인한 결함구조를 보여 주었다.

  • PDF

A Study on the Mechanochemical Effects of Dickite (Dickite의 메카노케미칼 효과에 관한 연구)

  • Ryu, Ho-Jin
    • Korean Journal of Materials Research
    • /
    • v.7 no.2
    • /
    • pp.152-156
    • /
    • 1997
  • In this paper, I meritioned ,I study on thc rnechanochernic;~l effec ts of grountl iljckite To investigate the mechanochemical effects of ground tlickite 1,y planet,~r\- mill. a structul-ill i~nalvsis of dickite prepared with different grinding time has been made 11y X-ray diffraction and ilifierenti,~l tl~i.~-ni;~i analysis. 'l'he $SiO_{4}$ hecira was unchanged bl- milling and remained ;is the local ordering unit s t t - ~ c ~ u ~ - c ~ s in the ground dickitc samples I ) v analyzing the radial distribution function. On the other hand, with an increi~se of the grinding time a decrease of coordination number and atomic distance bet\vccn aluminum and oxygen hi1c.r l~een octurreil, and Li~~antitativcl\. coniirrned them This result corresponded to the local c,hange around aliimi~iuni I>V tliftercntii~l t1ii:rm;il ani~lysis. Therefore, the mechanochemical phenomina of ground tiickite werc3 h e to the local c~l~mge around aluminum \IT. the prolonged grinding.

  • PDF

Measurement of carbonation depth of concrete in old buildings and experimental evaluation of carbonation degree and CO2 absorption using differential thermal gravimetric analysis (노후 건축물의 콘크리트 탄산화 깊이 측정과 시차열 중량분석을 통한 탄산화도 및 CO2 흡수량 실험적 평가)

  • Lee, Sang-Hyun;Ki, Jun-Do;Cho, Hong-Bum;Park, Chang-Gun;Kim, Young-Sun;Moon, Hyung-Jae
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2022.11a
    • /
    • pp.197-198
    • /
    • 2022
  • Based on the carbonation depth measurement by the indicator for concrete collected from old structures and the quantitative analysis of Ca(OH)2 and CO2 in the carbonation section before and after the carbonation depth and in the non-carbonation section, the absorbable CO2 amount and carbonation degree measurement result is as follows 1) The carbonation depth of the 40-year-old reinforced concrete structure was measured to be about 22 mm. (basement interior wall, marble finish, strength 30MPa) 2) The amount of CO2 absorbed by the concrete was about 4.3% of the sample weight, and the carbonation degree was estimated to be about 53%.

  • PDF

Microstructure Observation of Pd-Cu-Ga system Dental Alloy in Clinical Heat Treatment (치과용 Pd-Cu-Ga 계 함금의 임상조건에 따른 미세조직 관찰)

  • 김기주;이진형
    • Journal of Biomedical Engineering Research
    • /
    • v.20 no.4
    • /
    • pp.443-449
    • /
    • 1999
  • 현재 시판되고 있는 치과용 76.5%Pd-11.6%Cu-7.2^%GarP 합금의 주조상태 및 임상열처리에 따른 미세조직의 변화를 X-선 회절기, 광학현미경, 시차열분석기를 이용하여 관찰하였다. 주조상태, 탈개스 및 세리믹소성처리 후 미세조직은 Pd고용체와 금속간화합물 Pd2Ga으로 구성되어 나타났고, 이들 상들은 열처리에 따라 상당한 변화를 보였다. 또한 Pd은 아르곤 분위기 내의 산소와 반응하여 산화물 형성 및 분해로 인해 질량변화곡선(TG)이 변하였고, 시차열분석(DTA)에서는 약 815$^{\circ}C$ 정도에서 Pd2Ga에 기인하는 흡열피크를 확인하였다. 이러한 실험의 결과들은 Cu가 이원계 Pd-Ga 합금의 Ga의 고용량을 낮추어 공정반응이 저 Ga 쪽으로 이동하기 때문인 것으로 설명하였다. 그러나 앞으로 보다 명확한 상변태 규명을 위해서 TEM등의 분석장비를 사용하여 체계적인 연구가 요구된다.

  • PDF

주가시계열에 대한 확률미분방정식(確率微分方程式)의 모수(母數) 추정(推定)과 자본시장의 운동법칙(運動法則)

  • Lee, Il-Gyun
    • The Korean Journal of Financial Management
    • /
    • v.15 no.2
    • /
    • pp.279-337
    • /
    • 1998
  • 이 논문에서는 주가가 확률과정, 즉 확률미분방정식에 의하여 생성되는가를 검정하고 주가의 운동법칙을 규명한다. 일별종합주가지수가 양수의 완전시계열상관을 갖고 있으며, 더욱이 3년 정도의 시차까지 의미있는 시계열상관을 갖고 있음이 발견되었다. 수익률과 가격변화의 시계열상관도 존재하고 시계열은 정상성(定常性)을 갖고 있다. 마팅게일에 의하여 주가가 생성되고있지 않음이 밝혀졌다. 한국증권거래소에서 계산하고 있는 일별 종합주가지수를 포함한 41개 산업별 지수를 사용하여 자본시장의 운동법칙을 규명하기 위하여 가장 많이 이용하고 있는 세개의 확률미분방정식을 검정하였다. 각 주가지수들이 온스타인 울렌벡 브라운 운동과정과 평균회귀과정을 따르지 않고 있다는 것이 발견되었다. 그러나 주가가 편류를 갖는 일반 기하 브라운 운동과정에 의하여 생성되고 있음이 검정을 통하여 확인되었다. 평균회귀과정에 의하여 주가가 생성되지 않는다는 발견은 의외라 할 수 있다. 주가가 온스타인 울렌벡 과정을 따르지 않는다는 것은 주가가 제 1계 정상적 자기회귀과정이 아니라는 것을 의미한다. 일별종합주가지수는 제 4계 자기회귀과정에 의하여 생성된다. 가격변화와 수익률의 생성함수는 제 4계 자기회귀과정이다. 종합주가지수의 제 1계 시계열상관계수는 1이다. 상당히 큰 시차를 갖을 때까지 시계열상관이 대략적으로 1을 유지하고 있다. 따라서 지수가 마팅게일을 따르고 있지 않다. 이 점은 가격변화와 수익률에 있어서도 유사하다. 가격변화, 수익률, 대수수익률의 제 1계 시계열상관이 0.1로 유의적이다. 따라서 수익도 마팅게일 과정을 따르고 있지 않다. 증권가격은 세 번에 걸쳐 구조의 번화가 발생하였다. 구조의 변화가 발생할 때마다 평균가격이 상승하였다. 이와 같은 현상은 장기적 기대가격이 미지일 가능성이 배제되지 않는다. 단기적 기대 주가가 알려진 반면 장기적 기대 주가가 미지라면 평균회귀과정은 장기적 기대주가로 회귀하고 있는 과정이므로 장기기대 주가의 미지성이 평균회귀 과정의 기각을 유도하게 된다. 우리나라의 투자자들은 무위험자산과 위험을 동시에 고려하여 투자활동을 전개하고 있음이 발견되었다. 선형의 효용함수를 갖는 위험중립적 태도의 투자자가 아니다. 위험기피형 효용함수 아래에서 투자활동을 수행하고 있는 합리적 투자자들이라 할 수 있다. 뿐 만 아니라 자신의 평생에 걸친 소비를 소비가 이루어지는 각 기마다 가급적 일정하게 하는 소비행동을 목표로 삼고 소비와 투자에 대한 의사결정을 내리고 있음이 실증분석을 통하여 밝혀졌다. 투자자들은 무위험 자산과 위험성 자산을 동시에 고려하여 포트폴리오를 구성하는 투자활동을 행동에 옮기고 있다.

  • PDF

Thermal Characteristics for Cross-Linking Polyethylene (가교 폴리 에틸렌 수지의 열적 특성 분석)

  • Song, Woo-Chang;Park, Ha-Yong;Shim, Jae-Sun;Bae, In-Su;Song, Jin-Ho;Park, Young-Jik;Kweon, Myeong-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1130-1131
    • /
    • 2015
  • 팰릿 형태의 XLPE (Cross-Linking Polyethylene)를 Hot Press로 시험편을 제작하여 열분석 데이터 처리장치를 이용하여 시차 주사 열량법 (differential scanning calorimetry, DSC)과 열 중량 분석 (Thermo gravimetric analysis, TGA) 등으로 열적 특성을 분석하였다. 분석 결과, XLPE의 전이온도 피크는 $61^{\circ}C$, 용융온도에 해당하는 피크는 $102^{\circ}C$에서 나타났으며 XLPE의 TG 분석 결과 $470^{\circ}C$ 근처에서 한 번의 급격한 열중량 감소를 보였으며 $800^{\circ}C$까지 측정 후 잔류물은 완전 분해되어 거의 존재하지 않았음을 알 수 있었다.

  • PDF

Studies on the Fusibility of Fly Ash-Flux Mixtures (융제 첨가 비산회의 융융성 연구)

  • Yang, Hyun S.;Lee, Kyu C.;Park, Chu S.
    • Applied Chemistry for Engineering
    • /
    • v.8 no.6
    • /
    • pp.985-993
    • /
    • 1997
  • The effects of CaO and MgO fluxes on the fusibility of fly-ashes were investigated for two different fly-ashes. A fusion temperature of mixtures of selected fly-ashes and fluxes were measured by the ASTM test method(D1857) and the differential thermal analysis. IDT of these samples added CaO and MgO as a fluxing agent dropped in the range of 114 to $294^{\circ}C$ and 80 to $224^{\circ}C$, respectively. Compared with ash fusion temperature to Base/Acid ratio, the lowest ash fusion temperature were measured in the range of 0.7 to 0.8 for CaO-fly ash mixtures and 0.3 to 0.4 for MgO-fly ash mixtures. As a result, MgO in small addition acted as a more effective flux than CaO. A conventional Base/Acid ratio and liquidus point of ternary diagram did not show a good correlation with ash fusion temperature for these samples. In pure fusion temperature of fly ash-mixtures, DTA was better method than ASTM test method.

  • PDF