• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.123-132
• /
• 1997

In the system $MgO-SiO_2-H_2O$, Talc[$Mg_3Si_4O_{10}(OH)_2$] has been synthesized hydrothermally at 200 MPa, $600^{\circ}C$ from the oxide mixture of the bulk composition of talc. The oxide mixture of the bulk composition of anthophyllite$[Mg_7Si_8O_{22}(OH)2]$ converted to talc, enstatite $(MgSiO_3)$, quartz at 200 MPa, $750^{\circ}C$ with excess of $H_2O$. In low to medium pressure metramorphism, enstatite-talc assemblage is metastable relative to anthophyllite with the reaction talc + 4 enstatite=anthophyllite (Greenwood, 1963). The high temperature stability of talc is bounded with the dehydration reaction to anthophyllite rather than that to enstatite(Greenwood, 1963; Chernosky et al., 1985). Therefore our experiment result assemblage, enstatite-talc-quatz at 200 MPa, $750^{\circ}C$ from oxide mixture of bulk compostion of anthophyllite is metastable assemblage. The hydrothermal experiment performed at 41 to 243 MPa, 680 to $760^{\circ}C$ with the starting material composed of synthetic talc, enstatite and quartz. Talc or enstatite grows during the runs and no extra phases including anthophyllite nucleated. Based on the increase or decrease of the each phase from run products, one of the possible reactions is talc=3 enstatite+quartz+H_2O$. The reversal bracket of the reaction is 699 to $700^{\circ}C$ at 100 MPa. Talc is stable up to $740^{\circ}C$ at 200 MPa and enstatite grow at $680^{\circ}C$, 40 MPa and at $760^{\circ}C$, 250 MPa. Though the high temperature limit of talc around 200 MPa is bounded thermodynamically by the reaction, 7 talc=3 anthophyllite+4 quartz+4 H_2O$, talc persisted throughout the previous reaction up to the reaction, talc=3 enstatite+quartz+$H_2O$.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.689-699
• /
• 2022

The Ssangjeon tungsten deposit is located within the Yeongnam Massif. Within the area a number of hydrothermal quartz veins were formed by narrow open-space filling of parallel and subparallel fractures in the metasedimentary rocks as Wonnam formation, Buncheon granite gneiss, amphibolite and/or pegmatite. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz vein; stage II, barren quartz vein) by major tectonic fracturing. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of arsenopyrite with pyrite; middle, characterized by introduction of wolframite and scheelite with Ti-Fe-bearing oxides and base-metal sulfides; late, marked by Bi-sulfides. Fluid inclusion data show that stage I ore mineralization was deposited between initial high temperatures (≥370℃) and later lower temperatures (≈170℃) from H₂O-CO₂-NaCl fluids with salinities between 18.5 to 0.2 equiv. wt. % NaCl of Ssangjeon hydrothermal system. The relationship between salinity and homogenization temperature indicates a complex history of boiling, fluid unmixing (CO₂ effervescence), cooling and dilution via influx of cooler, more dilute meteoric waters over the temperature range ≥370℃ to ≈170℃. Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur by evolution of the Ssangjeon hydrothermal system with increasing paragenetic time.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.147-156
• /
• 2021

We report fluid inclusion study results of copper-bearing quartz veins in Zogdor area, which is located within the Gurvansayhan island arc terrane of Southern Mongolia. At the Zogdor area, structurecontrolled copper mineralization is hosted in granodiorite-porphyry, which emplaced in the late Cretaceous formation. Within this granodiorite porphyry, copper-bearing quartz veins are associated with the hydrothermal alteration that includes quartz-epidote-magnetite, and quartz-magnetite in the propylitic zones. The veins are classified into two types, according to their mineral composition, which occur mainly as chalcopyrite, rare amounts of bornite, magnetite, and pyrite. Fluid inclusions in the quartz veins from the quartz-magnetite±chalcopyrite and quartz-epidote-magnetite veins are two-phase aqueous inclusions having bubble sizes of 5-30 vol.%, evident salinities of 2.0-22.6 wt.% NaCl, and homogenization temperatures of 107-270℃. Based on mineral assemblages of the observed veins, along with the geochemical properties and alteration faces of the host rock, fluid inclusion data show that the study area corresponds to propylitic alteration zone in the porphyry Cu related mineralization.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.95-103
• /
• 1993

The geology of the talc ore deposits in the Chungju area consists of the Kyemyeongsan Formation, the Munjuri Formation, the Daehyangsan Quartzite, the Hyangsanni Dolomite, and the basic rocks of the Ogcheon belt. The talc ore occurs in the Hyangsanni Dolomite near the Daehyangsan Quartzite The mineral assemblages in the Hyangsanni Dolomite are \circled1calcite-tremolite-talc-quartz, \circled2calcite-talc-quartz, \circled3tremolite-calcite-dolomite, and \circled4calcite-dolomite-phlogopite-chlorite. Talc has almost the ideal composition($X_{Mg}$=Mg/(Fe+Mg)=0.98). Talc was formed in siliceous dolomite by the medium-pressure type regional metamorphism. The evidences for contact metamorphism and/or hydrothermal reaction are not clear. The metamorphic grade of the Hyangsanni Dolomite and its adjacent pelitic or basic rocks near the deposits corresponds to epidote-amphibolite facies or greenschist facies based on the, mineral assemblages of \circled1hornblendebiotite-muscovite-epidote-quartz \circled2biotite-chlorite-quartz, and \circled3hornblende-actinolite-plagioclasequartz. The formation of the talc deposits were caused by the following reactions due to greenschist facies metamorphism of siliceous-dolomitic rocks in the Hyansanni Dolomite. (I) 3 dolomite+4 quartz+$H_2O$= talc+ 3 calcite +3 $CO_2$; (11) 3 tremolite+ 2 $H_2O$+ 6 $CO_2$= 5 talc+ 6 calcite + 4 quartz. The minimum temperature of the talc-tremolite-quartz assemblage is about $434^{\circ}C$ from calcite thermometry and the carbon dioxide mole fraction in metamorphic fulid($X_{$CO_2$}$) is about 0.1 at assumed pressure, 3 kbar.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.1
• /
• pp.27-37
• /
• 1993

The clay minerals such as sericite, pyrophyllite, chlorite and smectite abundantly occur in the Bobae pottery stone mine in Pusan. In this study, the processes which are responsible for the formation of these minerals were studied by examing their occurrence and mineralogical properties. The so-called pottery stone of this mine is characterized by the predominance of sericite and quartz. The sericite of the pottery stone is mostly $2M-{1}$ type. And many of quartz particles are smaller than a few micron in diameter. The pottery stone also contained a small amount of pyrophyllite and muscovite. The pottery stone deposit occurs within the Cretaceous rhyodacite and is particularly well developed near the contact with the quartz porphyry which intrudes the rhyodacite. The fact implies that the pottery stone is the product of hydrothermal alteration of the rhyodacite by the intrusion of quartz porphyry. The pottery stone was formed by the alteration that accompanies the dissociation of feldspar and chlorite in parent rocks and subsequent formation of sericte and quartz. Smectite, laumontite and kaolinite occur locally within the altered rocks. These minerals were formed after formation of pottery stone. It is noteworthy that beidellite occurs as a pink-colored clay from the altered rocks in the mine.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.239-257
• /
• 2023

Sangdong deposit, a W-Mo skarn deposit, is located in Taebaeksan mineralized district, hosting vertically developed scheelite-quartz veins that formed at the late ore-forming stage. In this study, we tried to examine the geochemical signatures of ore-forming fluids and vein-forming mechanisms by analyzing the micro-texture of quartz veins and trace element concentrations of quartz. As a result of texture analyses, quartz veins in the hanging wall orebody and the foot wall orebody commonly exhibit the blocky and the elongate blocky texture, respectively, whereas quartz veins in the main orebody show both textures. These textural differences indicate that quartz veins from the hanging wall orebody were precipitated by the primary hydrofracturing due to H₂O saturation in the igneous body with relatively high temperature and pressure at a vein-skarn stage, and after that, repeated hydrofracturing caused the formation of quartz veins from the main orebody and foot wall orebody. The results of trace element concentrations show that Li⁺+Al³⁺↔Si⁴⁺ is a main substitution mechanism. However, those of the foot wall orebody were clearly divided into a Li⁺-dominated substitution and a Na⁺-, K⁺-dominated substitution. Considering that quartz veins from the foot wall orebody commonly show the elongate blocky texture, such a distinction means that it is a result of repeated injections of fluid with the different composition. Ti concentrations of quartz from the hanging wall, main, and the foot wall orebody are 28.6, 8.2, and 15.7 ppm in average, respectively. Given a proportional relationship between the precipitation temperature and Ti concentrations, it seems that quartz veins from the hanging wall orebody were precipitated at the highest temperature. Al concentrations of the hanging wall, main, and the foot wall orebody having an inverse relationship with fluid pH are 162.3, 114.2, and 182.5 ppm in average, respectively. These results show that Al concentrations in vein-forming fluids were not changed dramatically. Moreover, these concentrations are extremely low in comparison with the other hydrothermal deposits. This indicates that quartz in overall ore veins at Sangdong deposit was precipitated from the constant condition with slightly acidic to near neutral pH.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.117-128
• /
• 2017

Occurrence characteristics and existing forms of U-Th containing minerals in KURT (KAERI Underground Research Tunnel) granite are investigated to understand long-term behavior of radionuclides in granite considered as a candidate rock for the geological disposal of high-level radioactive waste. KURT granite primarily consists of quartz, feldspar and mica. zircon, REE(Rare Earth Element)-containing monazite and bastnaesite are also identified. Besides, secondary minerals such as sericite, microcline and chlorite including quartz vein and calcite vein are observed. These minerals are presumed to be accompanied by a post-hydrothermal process. U-Th containing minerals are mainly observed at the boundaries of quartz, feldspar and mica, mostly less than $30{\mu}m$ in size. Quantitative analysis results using EPMA (Electron Probe Micro-Analyzer) show that 74.2 ~ 96.5% of the U-Th containing minerals consist of $UO_2$ (3.39 ~ 33.19 wt.%), $ThO_2$ (41.61 ~ 50.24 wt.%) and $SiO_2$ (15.43 ~ 18.60 wt.%). Chemical structure of the minerals calculated using EPMA quantitative analysis shows that the U-Th minerals are silicate minerals determined as thorite and uranothorite. The U-Th containing silicate minerals are formed by a magmatic and hydrothermal process. Therefore, KURT granite formed by a magmatic differentiation is accompanied by an alteration and replacement owing to a hydrothermal process. U-Th containing silicate minerals in KURT granite are estimated to be recrystallized by geochemical factors and parameters such as temperature, pressure and pH owing to the hydrothermal process. By repeated dissolution/precipitation during the recrystallization process, U-Th containing silicate minerals such as thorite and uranothorite are formed according to the variation in the concentrated amount of U and Th.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.2
• /
• pp.180-184
• /
• 2013

Study on extraction and concentration of mulberry leaf were performed to increase utilization as new source of food additives. We analyzed extraction method in EtOH, sugar and hot water solution. The desirable method was 70% alcoholic extraction. Color of concentrate was comparatively stable in 70% alcoholic extraction solution and sugar solution. But hot water extraction was showed color change with brown. By filtering of concentrate in 70% alcoholic extraction and sugar extraction, we removed a deposits. Also, we investigated characteristics of the concentrate from mulberry leaf.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.571-577
• /
• 1995

Several acid-sulfate clay deposits associated with silicic magmas occur in the Haenam area of the southwestern part of Korea. Geology of the studied area consists of tuffs, granitic rocks, quartz porphyry, rhyolite, andesite and sedimentary rocks. The granitic rocks and quartz porphyry intruded tuffs and sedimentary rocks. The rhyolite and tuffs around the mines have undergone hydrothermally weak or strong alteration. Gold contents with major and trace elements have been determined for a total of sixty-seven specimens of fresh igneous rocks, wall rocks and minerals such as dickite and alunite by graphite furnace atomic absorption spectrometer and inductively coupled plasma. Gold is enriched in the alunite vein and the silicified zone, but is depleted in dickites and hydrothermally altered rocks with dickite of the Seongsan deposit. Gold is especially concentrated near the faults or conjunction area of two faults. High content of gold is shown in the mineral assemblages of alunitequartz- pyrite in the alunite vein and silicic zone of the Seongsan deposit compared with that of minerals and rocks from another deposits distributed in the studied area. Gold content in tuffs and dickites with pyrite is generally low. Gold content in silicified tuff tends to show positive correlations with content of As, Hg and Sb. Variation trends of Cd, Hg and Sb are similar to those of gold content. From the result of gold content variations, gold may be transported and concentrated by mineralizing solutions ascending along the cracks like fault. Therefore, it is important to survey alunite vein and silicified zone at the conjunction of faults, and to analyze pathfinder elements such as As, Hg and Sb for geological and geochemical exploration of gold in the studied deposits.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.337-346
• /
• 2006

The Jinwon Pb-Zn deposit is located within the Precambrian Youngnam Massif. Ore mineralization at the Jinwon deposit occurred in quartz veins that filled fractures in the Hongjesa granite. Mineral paragenesis can be divided into two stages(stage I and II). Stage I, at which the precipitation of major ore minerals occurred, is further divided into two substages with paragenetic time based on minor fractures and discernible mineral assemblages: substage la is characterized by pyrite, arsenopyrite ($28.4{\sim}30.3$ atomic % As), pyrrhotite, magnetite, chalcopyrite, sphalerite ($13.1{\sim}16.0$ mole % FeS) assemblages; substage $I_a$ is represented by main precipitation of Zn, Pb minerals and is characterized by sphalerite ($15.1{\sim}19.0$ mole % FeS), galena, miargyrite, argentile assemblages. Stage II is economically barren quartz veins. Thermodynamics study is used to estimate changes in chemical conditions of the hydrothermal fluids during stage I mineralization, the main ore deposition period at the Jinwon hydrothermal system. The range of estimated sulfur fugacity ($fs_2$) was from $10^{-7}\;to\;10^{-16}$ atm and oxygen fugacity ($fo_2$) was in the range of $10^{-32.8}{\sim}10^{-38.5} atm$. Carbon dioxide fugacity ($fco_2$) was $<10^{-0.6} atm$.