• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.83-83
• /
• 2021

수리구조물로 인한 유황변화와 함께 기후변화로 기인하는 강우변동성 및 온도 증가는 수생태 전반에 악영향을 미치는 주요 인자로 작용하고 있다. 특히, 최근 가뭄으로 인한 유황감소 및 폭염 등으로 여름철 녹조의 발생 빈도 및 강도 증가가 지속적으로 증가하고 있다. 본 연구에서는 하천에서 계측되고 있는 Cyanobacteria 개체수를 기반으로 녹조발생 여부를 전망할 수 있는 모형을 개발하고자 한다. Cyanobacteria 개체수를 기준으로 녹조발생 여부를 판단할 수 있도록 기준값(threshold)을 설정하고 binary 형태로 시계열을 구성하였다. 이를 Bernoulli 모형에 적합하여 녹조 발생 여부를 판단할 수 있도록 모형을 개발하였다. 하천을 따라 나타나는 녹조는 시공간적으로 유사한 특성을 가지며, 이러한 점을 고려하여 여러 관측지점을 동시에 모델링하는 것이 모형의 효율성과 예측성 측면에서 유리하다. 본 연구에서는 낙동강을 따라 여러 녹조관측지점을 대상으로 동시에 모델링이 가능하도록 다변량 Bernoulli 모형 기반의 녹조 예측 모형을 제시하고 과거 자료를 대상으로 모형의 적합성을 평가하였다. 다양한 지표를 기준으로 교차검증을 수행하였으며, 기존 물리적 모델에 비해 모형의 예측성능 및 효율성 측면에서 우수성을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1010-1015
• /
• 2012

DME(Dimethyl ether) is the one of the massive energy sources synthesized from natural gas. KOGAS has already developed the commercial-scale production plant of DME and has been doing to obtain overseas resources to meet the domestic needs. This paper presents the DME storage tank design criteria by stress and strain analysis, and the experimental study on the evaporation phenomena of DME by thermal intake and physical rolling movement of DME FPSO or cargo vessel, because the various moving motions along with heat intake cause the evaporation of low temperature liquid. The experimental result shows that the evaporation rate was increased with larger rolling degree and higher liquid level. The rolling motion leads to evaporate about 20% increase with 15 degree rolling based on the evaporation quantity without rolling.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.45-53
• /
• 2008

The burning behaviors of board for flooring materials were investigated using cone calorimetry at an incident heat flux of $50kWm^{-2}$. Seven domestic flooring materials were used to observe the burning behavior of maximum heat release rate, total heat release and average heat release rate. The experimental data indicated that the medium density fiberboard (MDF) flooring had higher release rate than the other flooring materials. Also, the mass loss of MDF flooring was higher than the other floors. When measuring the smoke production from burning, PE fiberboard flooring and PVC Plastic Resin Sheet showed higher carbon monoxide and carbon dioxide yield than the others. The average smoke release of both carbon dioxide and carbon monoxide through specific extinction area was similar. Toxic smoke measurement from flooring materials were determined by the mouse stop motion, and the results indicated that MDF flooring contains more toxic material than the other flooring materials.

• Water for future
• /
• v.9 no.2
• /
• pp.87-100
• /
• 1976

These studies are aimed at the analysis of systematic variation pattern of water resources in Korean river catchments and the development of their simulation models from the stochastic analysis of monthly and annual hydrologic data as main elements of water resources, i.e. rainfall and streamflow. In the analysis, monthly & annual rainfall records in Soul, Taegu, Pusan and Kwangju and streamflow records at the main gauging stations in Han, Nakdong and Geum river were used. Firstly, the systematic variation pattern of annual streamflow was found by the exponential function relationship between their standard deviations and mean values of log-annual runoff. Secondly, stochastic characteristics of annual rainfall & streamflow series were studied by the correlogram Monte Carlo method and a single season model of 1st-order Markov type were applied and compared in the simulation of annual hydrologic series. In the simulation, single season model of Markov type showed better results than LN-model and the simulated data were fit well with historical data. But it was noticed that LN-model gave quite better results in the simulation of annual rainfall. Thirdly, stochastic characteristics of monthly rainfall & streamflow series were also studied by the correlogram and spectrum analysis, and then the Model-C, which was developed and applied for the synthesis of monthly perennial streamflow by lst author and is a Markov type model with transformed skewed random number, was used in the simulation of monthly hydrologic series. In the simulation, it was proved that Model-C was fit well for extended area in Korea and also applicable for menthly rainfall as well as monthly streamflow.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.442-453
• /
• 2013

A large-scale high-temperature thermal energy storage(TES) was numerically modeled and the heat loss through storage tank walls was analyzed using a commercial code, FLAC3D. The operations of rock cavern type and above-ground type thermal energy storages with identical operating condition were simulated for a period of five consecutive years, in which it was assumed that the dominant heat transfer mechanism would be conduction in massive rock for the former and convection in the atmosphere for the latter. The variation of storage temperature resulting from periodic charging and discharging of thermal energy was considered in each simulation, and the effect of insulation thickness on the characteristics of heat loss was also examined. A comparison of the simulation results of different storage models presented that the heat loss rate of above-ground type TES was maintained constant over the operation period, while that of rock cavern type TES decreased rapidly in the early operation stage and tended to converge towards a certain value. The decrease in heat loss rate of rock cavern type TES can be attributed to the reduction in heat flux through storage tank walls followed by increase in surrounding rock mass temperature. The amount of cumulative heat loss from rock cavern type TES over a period of five-year operation was 72.7% of that from above-ground type TES. The heat loss rate of rock cavern type obtained in long-period operation showed less sensitive variations to insulation thickness than that of above-ground type TES.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.75-84
• /
• 2016

Thermal performance of wooden houses used by building materials effectively contributing to building energy saving has been improved. However, the performance was decreased to the condensation and mould growth from exterior wall because the moisture control was difficult to high insulation and airtightness. Therefore, the hygrothermal performance of exterior wall, that selected 5 types of wooden houses, evaluated using the hygrothermal simulation program: heat and moisture behavior, condensation and mould growth risk. Wooden houses were selected Rural houses standard plans '10 and '14, $2^{{\prime}{\prime}}{\times}6^{{\prime}{\prime}}$ type, EIFS and wood-based passive house. And the wall A, B, C, D and E were determined by layer component of each wall. The U-value of exterior wall are 0.171, 0.172, 0.221, 0.150, $0.079W/m^2K$. The OSB absolute water content of the wall A and C was exceeds the reference value of 20%, and it was confirmed that condensation occur at insulation material inner surface through the condensation evaluation in the winter. The wall D and E showed excellent results with condensation and water content evaluation compared to others. However, mould growth risk assessment in all five types of wall had have risk. We were determined that hygrothermal performance difference of exterior wall occur the difference in the layer structure rather than in thermal performance.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.189-194
• /
• 2020

In this study, the durability on heat was considered through the thermal stress analyses on models A, B, and C of laptops. Model A is an integral part, indicating that the heated keyboard showed the highest temperature and the monitor part far from the heated one showed the coldest. In models B and C, only the heated keyboard parts are modeled, so it can be seen that they get hot overall. In the case of model A, the thickness of the laptop keyboard was thicker, but there were the most deformations, while model C had the thinnest thickness with the smallest stress and deformation. Model B had the highest stress but relatively little deformation. It is considered that the result of thermal analysis in this study can be used to make the latest efficient design of durable laptop. The durability of laptop against the heat can be evaluated by applying this study result to the laptop. And it is seen that the result can be the design of laptop with strength and the aesthetic convergence.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.78-83
• /
• 2007

Diesel, a kind of petroleum, which is used in vehicles, vessels, boilers etc causes great damage when a fire happens, because it has higher caloric value than gasoline or kerosene has at burning. Therefore, pool fire experiment was carried using diesel which is sold on the gas station and radiation heat flux that occurs from flame and inner temperature of flame at burning was estimated. The maximum instantaneous flame temperature of diesel was more than $900^{\circ}C$, and the average of maximum flame temperature was $800^{\circ}C$ which occurred at 0.5 H/D distance from the surface of inflammable liquid, the distance has more long that has the lower the temperature of flame. In case of radiation heat flux, it grew to vary according to the size and amount of sample. When the size of a container for experiment was 0.5 m and sample layer was 13 mm and 20 mm, the radiant heat was 92.29 kW and 117.43 kW each. When the container was 1.0 m, it was 364.35 kW and 405.88 kW each.

• Nuclear Engineering and Technology
• /
• v.17 no.1
• /
• pp.45-52
• /
• 1985

A two inverted U-tubes condenser was constructed from transparent materials to study the heat removal capability of steam generators under filmwise reflux condensation mode. Essentially, two sets of experiments were performed: (1) the first dealt with the reflux condensation length, and (2) the second dealt with the flooding points with and without the presence of a noncondensible gas in the steam flow, and the effect of the flooding time. In addition, experimental results are compared with the predictions of analytical models.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.365-365
• /
• 2020

최근 기후변화로 인한 강우, 온도, 유량과 같은 수문학적 요소의 불확실성 증가와 더불어 산업화, 도시화로 인한 물 수요가 커짐에 따라 물부족 발생 위험이 증가하고 있다. 이에 따라, 안정적인 물 공급을 위한 하천유량과 취수량의 균형을 목적으로 하는 취수량의 예측 및 모의에 대한 중요성이 강조되고 있다. 본 연구에서는 과거 하천 취수량 자료로부터 미래 취수량을 예측하기 위해 딥러링 기법 중 하나인 순환신경망(LSTM) 모형과 시계열분해법을 결합하여 취수량 예측 모형을 개발하였다. 시계열분해법을 통해 자료의 경향성과 계절적 변동성 등 다양한 스케일의 시계열을 분해하여 전처리를 수행하였으며 불확실성을 의미하는 잔차(residual)에 LSTM을 적용하여 예측하였다. 결과적으로 LSTM 취수량 예측 모형은 높은 정확도를 보였으며, 월단위 전망 시 관측값에 대하여 신뢰성이 있는 결과를 나타내었다. 본 연구에서 개발한 모형에 따른 결과는 수자원 관리를 위해 활용이 가능할 것으로 기대된다.