• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.340-349
• /
• 2009

A CJ9 bacterial strain, which showed antifungal and antibacterial activities, was isolated from meju and identified as Bacillus polyfermenticus based on Gram staining, biochemical properties, as well as its 16S rRNA sequence. B. polyfermenticus CJ9 showed the antimicrobial activity against the various pathogenic molds, yeasts, and bacteria. The antibacterial activity was stable in the pH 5.0~9.0, but the activity was lost at $37^{\circ}C$ for 24 hr. The antifungal activity was stable in the pH range of 3.0~9.0 and reduced at $121^{\circ}C$ for 15 min, but antifungal activity was not completely destroyed. The antibacterial activity was completely inactivated by proteinase K, protease, trypsin, and $\alpha$-chymotrypsin. The antifungal activity was also completely inactivated by protease and $\alpha$-chymotrypsin, and reduced its activity by proteinase which indicated that the antifungal and antibacterial compounds have proteineous nature. The apparent molecular mass of the partially purified antifungal compound, as indicated by using the direct detection method in Tricine-SDS-PAGE, was approximately 1.4 kDa. The molecular mass of the antibacterial compound could not be determined because of its heat-liable characteristic.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.44-48
• /
• 2013

In this work, we have prepared tungsten doped vanadium oxide ($W-VO_2$) particles with a low phase transition temperature. $W-VO_2$ particles were synthesized via thermolysis method using vanadyl (IV) sulfate and ammonium bicarbonate as precursors. The structure and thermochromic property of synthesized $W-VO_2$ particles were investigated by FE-SEM, EDS, XRD, XPS, and DSC analysis. The prepared $W-VO_2$ showed a nearly platy morphology, which indicates that the tungsten was successfully doped in the crystal lattices of $VO_2$. $W-VO_2$ nanoparticles with the size of 60 nm exhibited a monoclinic crystal structure and its chemical composition and surface state were also likely to be close to that of $VO_2$. In addition, the phase transition temperature of $W-VO_2$ was $38.5^{\circ}C$, which was approximately $29.2^{\circ}C$ lower than that of pure $VO_2$ ($67.7^{\circ}C$), indicating that the prepared sample had a good reversible thermochromic stability.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.287-294
• /
• 2005

In this paper, an optical true time-delay (TTD) for two-dimensional (2-D) phased array antennas (PAAs), composed of a multi-wavelength optical source and a fiber optic delay line matrix consisting of $2\times2$ optical switches with optical fiber connected between cross ports, has been proposed. A 2-bit $\times4-bit$ optical TTD for 10-GHz 2-D PAAs has been implemented by cascading a wavelength dependent TTD (WD-TTD) and a wavelength independent TTD (WI-TTD). The unit time delay for WD-TTD and WI-TTD have been chosen as ${\Delta}T=12ps$ and $\Delta\tau=6ps$, respectively. Time delay have been measured at all radiation angles. The maximum delay error for WD-TTD was measured to be 3 ps due to jitter incurred from gain switching. For the case of WI-TTD, error was within ${\pm}\;1\;ps$. The proposed optical TTD for a 2-D PAA has the following advantages: 1) higher gain compared to one-dimensional linear PAAs, 2) stabilization of optical power and wavelength by using a multi-wavelength optical source, and 3) fast beam scan and simple operation due to electronic control of the $2\times2$ optical switches matrix on a column-by-column basis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.100-102
• /
• 2013

Magnetron-sputtering법을 사용하여 기존에 연구하였던 CrAlN (Cr 7：Al 3)박막에 Si를 첨가하여 Si의 함량 변화에 따라 미세구조와 화학적 결합상태, 온도저항계수(TCR) 및 산화저항의 영향과 기계적특성 개선을 통한 multi-functional heater resistor layer로써의 가능성을 연구하였다. CrAlSiN 박막의 Si 함량에 변화에 따라 온도저항계수 변화를 확인하였으며 X-선 회절 분석(XRD) 패턴 분석결과 CrAlSiN 박막의 결정구조가 Bl-NaCl 구조를 가지고 있는 것을 확인하였으며 SEM과 AFM을 통한 표면 및 미세구조 분석결과 Si의 함량이 증가할수록 입자가 조밀해짐을 알 수 있었다. 최근 digital priting technology의 핵심 기술로 부각되고 있는 inkjet priting technology는 널리 태양전지뿐만 아니라 thin film process, lithography와 같은 반도체 공정 기술에 활용 할 수 있기 때문에 반도체 제조장비에도 사용되고 있으며, 현재 thermal inkjet 방식을 사용하고 있다. Inkjet printing technology는 전기 에너지를 잉크를 배출하기 위해 열에너지로 변환하는 thermal inkjet 방식을 사용하고 있는데, 이러한 thermal inkjet 방식은 기본적으로 전기저항이 필요하지만 electrical resistor layer는 잉크를 높은 온도에서 순간적으로 가열하기 때문에 부식이나 산화 등의 문제가 발생할 수 있어 이에 대한 보호층을 필요로 한다. 하지만, 고해상도, 고속 잉크젯 프린터, 대형 인쇄 등을 요구되고 있어 저 전력 중심의 잉크젯 프린터의 열효율을 방해하는 보호층 제거에 필요성이 제기되고 있다. 본 연구는 magnetron-sputtering을 사용하여 기존의 CrAlN 박막에 Si를 합성하여 anti-oxidation, corrosion resistance 그리고 low temperature coefficient of resistance 값을 갖는 multi-functional heater resistor layer로써 CrAlSiN 박막의 Si 함량에 따른 효과에 초점을 두었다. 본 실험은 CrAlN 박막에 Si 함량을 4~11 at%까지 첨가시켜 함량의 변화에 따른 특성변화를 확인하였다. 함량이 증가할수록 amorphous silicon nitride phase의 영향으로 박막의 roughness는 감소하였으며 XRD 분석결과 (111) peak의 Intensity가 감소함을 확인하였으며 SEM 관찰시 모든 박막이 columnar structure를 나타내었으며 Si함량이 증가할수록 입자가 치밀해짐을 보여주었다.Si함량이 증가할수록 CrAlN 박막에 비하여 면저항은 증가하였으며 TCR 측정결과 Si함량이 6.5 at%일 때 가장 안정한 TCR값을 나타내었다. Multi-functional heater resistor layer 역할을 하기 위해서, CrAlSiN 박막의 원소 분포, 표면 거칠기, 미세조직, 전기적 특성 등을 조사하였다. CrAlN 박막의 Si의 첨가는 크게 XRD 분석결과 주상 성장을 억제 할 수 있으며 SEM 분석을 통하여 Si 함량이 증가할수록 Si3N4 형성이 감소하며 입자크기가 작아짐을 확인하였다. 면저항의 경우 Si 함량이 증가함에 따라 높은 면저항을 나타내었으며 Si함량이 6.5 at%일 때 가장 낮은 TCR 값인 3120.53 ppm/K값을 보였다. 이 값은 상용되고 있는 heater resistor보다 높지만, CrAlSiN 박막이 더 우수한 기계적 특성을 가지고 있기 때문에 hybrid heater resistor로 적용할 수 있을 것으로 기대된다.

• Membrane Journal
• /
• v.12 no.2
• /
• pp.107-119
• /
• 2002

Carbon-silica ($C-SiO_2$) membranes can be easily prepared by the pyrolysis of two-phase copolymers containing an aromatic imide block and a siloxane block and remarkably high permselectivities of $He/N_2, O_2/N_2,$ and $CO_2/N_2$. The pyrolysis of the imide-siloxane block copolymers was carried out at different final temperatures, $600^{\circ}C, 800^{\circ}C,$ and $1000^{\circ}C$ under an inert atmosphere, and is the first reported case of the precursors being used for the preparation of carbon membrane. The polymeric precursors were synthesized in a wide range of siloxane content and different final morphology, and the pyrolozed membranes were tested with a high vacuum time-lag method at $25^{\circ}C$ and 76cmHg of feed pressure. In experiments with He, $CO_2, O_2 \;and \;N_2$, the membranes were found to have good $O_2/N_2$ selectivity up to 32.2 and $O_2$ permeability on the order of $10-8/cm^2(STP)cm/cm^2seccmHg.$.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.1
• /
• pp.55-65
• /
• 2020

The use of underfill materials in semiconductor packages is not only important for stress relieving of the package, but also for improving the reliability of the package during shock and vibration. However, in recent years, as the size of the package becomes larger and very thin, the use of the underfill shows adverse effects and rather deteriorates the reliability of the package. To resolve these issues, we developed the package using a solid epoxy material to improve the reliability of the package as a substitute for underfill material. The developed solid epoxy was applied to the package of the application processor in smart phone, and the reliability of the package was evaluated using thermal cycling reliability tests and numerical analysis. In order to find the optimal solid epoxy material and process conditions for improving the reliability, the effects of various factors on the reliability, such as the application number of solid epoxy, type of PCB pad, and different solid epoxy materials, were investigated. The reliability test results indicated that the package with solid epoxy exhibited higher reliability than that without solid epoxy. The application of solid epoxy at six locations showed higher reliability than that of solid epoxy at four locations indicating that the solid epoxy plays a role in relieving stress of the package, thereby improving the reliability of the package. For the different types of PCB pad, NSMD (non-solder mask defined) pad showed higher reliability than the SMD (solder mask defined) pad. This is because the application of the NSMD pad is more advantageous in terms of thermomechanical stress reliability because the solderpad bond area is larger. In addition, for the different solid epoxy materials with different thermal expansion coefficients, the reliability was more improved when solid epoxy having lower thermal expansion coefficient was used.

• Korean Journal of Environment and Ecology
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2000

본연구는 울릉도의 성인봉과 태하령 지역의 산림 식생을 대상으로 199년 7-8월에 식생조사와 토양조사에 의한 너도밤나무 군락의 임분구조 및 DCCA ordination을 이용하여 분석한 결과는 다음과 같다. 1. 울릉도 산림의 중요치를 각 군락별로 살펴보면 너도밤나무-섬조릿대 군락에서 중요치가 높은 종은 너도밤나무, 우산고로쇠, 마가목, 섬단풍, 섬벚나무 등의 순으로 너도 밤나무-일색고사리 군락은 우산고로쇠 너도밤나무, 마가목 층층나무, 등수국 등의 순으로 나타났다 그리고 너도밤나무-큰두루미꽃 군락에서 중요치가 높은 종은 너도밤나무 우산고로쇠 등수국 마가목 음나무등의 순으로 솔송나무-섬잣나무 군락은 섬잣나무, 너도밤나무, 솔송나무, 회솔나무, 섬피나무 등의 순으로 나타났다. 2. DCCA ordination에 의하면 산림군락과 환경요인과의 상관관계는 다음과 같다 너도밤나무-섬조릿대 군락은 해발고가 높고 네 군락 중 토양수분이나 전절소 유기물 등이 많은 지역에 분포하고 있었다. 너도밤나무-일색고사리 군락은 해발고가 다른 군집보다 높고 토양수분이나 전질소, 유기물 등이 많아 너도밤나무-섬조릿대 군락과 매우 유사한 입지환경을 가진 지역이나 토성 중 clay 가 많이 함유된 지역에 분포하고 있었다. 너도밤나무-큰두루미꽃 군락은 해발고가 네 군락 중 중간지역에 분포하고 있으며 토양수분이나 유기물, 전질소 등도 중간인 지역에 분포하고 있었다. 솔송나무-섬잣나무 군락은 해발고가 낮고 토양수분이나 전질소, 유기물이 적고 sand가 많이 함유된 토양에 분포하고 있었다. 3. 울릉도 산림군락으 Shannon의 종다양도 지수는 0.5455~0.8801으로 비교적 낮은 수치를 나타내고 있다. 또한 너도밤나무 군락에서 분포하고 있는 주요 종의 조서열 중요치 곡선을 보면 전체의 기울기가 완만하여 너도밤나무 군락은 안정적이라 할 수 있다.단 생산성 향상을 위한 세포의 고농도 배양에는 조사한 여러 배양 시스템 중에 가장 효율적인 시스템임올 알 수 있었다 하지만 이 시스템 에서 포도당을 낮은 level로 유지할 수 있었으나, 초산의 과도한 축적으로 항체 생산성의 향상은 예상에 비해 크지 않았다. 81%), C18 0(12.38%), C18: 1(25.93%), C22:6(9.95%)이며 결합지방질(結合脂肪質)은 C14 : 0(11.60%), C16 : 0(18.94%), C16: 1(10.42%). C18 : 1(10.89%), C22 : 6(23.44%)이었다. 총필수지방산(總必須脂肪酸) 함량(含量)은 극성지방질(極成脂肪質)$(20.14{\sim}31.12%)$이 비극성지방질(非極成脂肪質)$(6.97{\sim}11.13%)$보다 훨씬 높았고, 결합지방질(結合脂肪質)이 유리지방질(遊離脂肪質)보다 높았으며 부위별(部位別)로는 피부(皮部)$(15.18{\sim}15.41%)$가 육질부(肉質部)$(6.97{\sim}11.13%)$보다 높았다. 또${\omega}3$고도부포화지방산(高度不飽和脂肪酸) 함량(含量)은 육질부(肉質部)$(15.15{\sim}28.32%)$가 피부(皮部)$(6.77{\sim}18.18%)$나 내장부(內臟部)$(8.35{\sim}9.74%)$보다 높았으며, 육질부(肉質部)에서는 극성지방질(極成脂肪質)$(26.28{\sim}34.18%)$이 비극성지방질(非極成脂肪質)$(15.15{\sim}28.32%)$보다 높았다.veral world-wide prediction models. Based on the analysis, we can easilty know

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.41-50
• /
• 2006

In this paper, sets of engineering analyses were conducted to renew the overall dimensions and configurations of a disposal container proposed as a prototype in the previous study. Such efforts and calculation results can provide new design variables such as the inner basket array type and thickness of the outer shell and the lid & bottom of a spent nuclear fuel disposal container. These efforts include radiation shielding and nuclear criticality analyses to check to see whether the dimensions of the container proposed from the mechanical structural analyses can provide a nuclear safety or not. According to the results of the structural analysis of a PWR disposal container by varying the diameter of the container insert, the Maximum Von Mises stress from the 102 cm-container meets the safety factor of 2.0 for both extreme and normal load conditions. This container also satisfies the nuclear criticality and radiation safety limits. This decrease in the diameter results in a weight loss of a container by $\sim20$ tons.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.153-162
• /
• 2005

In this Paper, sets of engineering analyses were conducted to renew the overall dimensions and configurations of a disposal container proposed as a prototype in the previous study. Such efforts and calculation results can provide new design variables such as the inner basket array type and thickness of the outer shell and the lid & bottom of a spent nuclear fuel disposal container. These efforts include radiation shielding and nuclear criticality analyses to check to see whether the dimensions of the container proposed from the mechanical structural analyses can provide a nuclear safety or not. According to the results of the structural analysis of a PWR disposal container by varying the diameter of the container insert, the Maximum Von Mises stress from the 102 cm container meets the safety factor of 2.0 for both extreme and normal load conditions. This container also satisfies the nuclear criticality and radiation safety limits. This decrease in the diameter results in a weight loss of a container by ${\~}$20 tons.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.461-464
• /
• 2002

A Chemoautotroph identified as an Aeromonas sp. strain JS-1 was isolated from fresh water. Aeromonas sp. strain JS-1 used the $H_2$ and $CO_2$ as energy and carbon sources, respectively. Growth characteristics for improving the $CO_2$ fixation rate were examined in batch cultivation. Its results shown that the optimal growth appeared at culture conditions of $35^{\circ}C$, pH 7 and NaCl 0.1%(w/v). Some hydrogen-oxidizing bacteria were reported that the enzyme activity of ribulose 1,5-bisphosphate carboxylase- oxygenase (RubisCO-EC 4.1.1.39), in the key enzyme of the Calvin-Benson cycle. A RubisCO was purified from a chemoautotrophic bacterium, Aeromonas sp. strain JS-1. the enzyme was purified by ammonium sulfate precipitation, DEAE-sepharose CL-6B and gel filtration chromatography. The RubisCO showed that molecular mass was about 560KDa from gel filtration chromatography and nondenaturing PAGE, and the RubisCO was confirmed to consist of $L_8S_8$ enzyme structure by sodium dodecyl sulfate polyacrylamide gel electrophoresis. A large subunit was about 56KDa and small one was about 15kDa. The Km values of the enzyme for ribulose 1,5-bisphosphate(RUBP), $NaH^{14}CO_3$, and $Mg^{++}$ were estimated to be 0.25mM, 5.2mM, and 0.91mM, respectively. The optimum temperature for RubisCO enzymatic activity were $50^{\circ}C$, and the enzymatic activity was stable up to $45^{\circ}C$.