• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.137.1-137.1
• /
• 2010

SOFC cell 하나의 전위차는 약1.1V이기 때문에 발전용으로 사용하기 위해서는 수많은 단전지를 직렬로 연결하는 구조가 필요하다. 이러한 stack의 디자인에서 발생하는 문제를 획기적으로 개선한 형태가 하나의 지지체에 셀을 직렬로 연결함으로 전극의 선폭 및 단위 셀 간의 간격이 기존 평판형, 원통형에 비해 대폭 축소되어 전극 및 연결재의 저항손실을 최소화할 수 있는 Segmented형 SOFC이다. Segmented SOFC에 적용하기 위한 세라믹 다공성 지지체는 연료와 공기에서의 화학적 안정성, 셀의 구성소재와 반응이 없으며 열팽창계수가 유사해야하는 특성을 가져야하는데 그 중에서도 지지체로써 적절한 기계적 강도와 높은 가스투과도가 요구되어진다. 본 연구에서는 고온에서 안정한 Spinel의 MgAl2O4를 주성분으로 하는 다공성 지지체를 압출 성형하여 평관형으로 제조하였으며 활성탄을 기공형성제로 사용하여 연료의 공급이 원활하도록 약 30%의 기공율을 가지는 다공성 세라믹 지지체를 제조하였다. 제조된 세라믹 지지체에 연료극(NiO/YSZ), 전해질(TZ8Y), 공기극(LSM)을 코팅하여 실제 SOFC에 적용이 가능함을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.19-19
• /
• 1999

KSR 3단 AKM Motor Case를 개발하기 위해 추진기관 경량화에 가장 유리하고 비강도 및 비강성이 뛰어난 복합재 연소관을 고려하여 직경 300mm급의 축소형 모델을 선행 개발하였다. Netting 이론에 의해 연소관 두께를 결정하고 체적을 최소화 하기 위해 구형으로 연소관 형상을 설계하였다. 연소관을 제작하기 위한 맨드렐은 분리, 조립식으로 설계, 적용하였고 연소관 기밀 유지 및 추진기관 연소시 연소관을 보호하기 위한 삭마성 재료로 EPDM base의 고무 내열재 조성을 개발하였다. 고무 내열재는 맨드렐 위에 적층하고 Vacuum bagging 상태로 Autoclave에서 가황하여 적용하였다. 국내 최초로 Prepreg를 사용하는 Dry process로 고무 내열재가 적층된 맨드렐 위에 Winding하고, Vacuum bagging 상태에서 경화하여 연소관을 제작하였으며, 이 때 사용한 Carbor/Epoxy Perpreg 재료의 기계적 성질 및 열특성 시험을 병행하였다. 제작된 연소관은 수압 시험을 통하여 구조적 안정성을 입증하였고, NDT 검사를 통해 재료간 계면 상태를 분석하였다. 시험이 끝난 연소관은 향후 점화기 개발을 위하여 점화제 종류 및 약량을 변경하여 점화 시험을 수행하여 점화기 개발을 위한 기초 데이터를 확보하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.87-90
• /
• 1998

1. 서론 : 막 분리공정에 사용되고 있는 대부분의 고분자 막들은 침지침강(immersion precipitation) 상변환법에 의해 제조되고 있다. 침지침강 상변환법으로 제조된 막의 최종 구조는 고분자 캐스팅 용액의 열역학적 특성과 비용매와의 속도론적 특성에 따라 대칭형 또는 비대칭형 막구조를 갖게 된다. 고분자/용매로 이루어진 캐스팅 용액에 제3의 성분으로서 PVP, PEG, LiCl. ZnCl$_2$ 와 같은 유.무기물을 첨가시킴으로서 막구조 및 투과성능을 변화시킬 수 있다. 이러한 점에서 이들 첨가제를 pore-forming agent라 부르기도 한다. 본 연구에서는 상대적으로 열적.기계적 특성이 우수하고, 화학약품에 대한 안정성이 뛰어나 상변환 막의 소재물질로서 널리 사용되고 있는 Polyethersulfone(PES)을 막 소재 물질로 사용하여 PES/NMP 캐스팅 용액에 다양한 종류의 무기염[CaCl$_2$, LiCl, LiClO$_4$, Mg(ClO$_4)_2$, ZnCl$_2$]을 PES에 대한 중량비를 달리하여 첨가시켜 비대칭 막을 제조하여 무기염의 첨가가 막구조 형성 및 막투과 특성에 미치는 영향을 연구하였다. 이때 첨가된 무기염 및 첨가 중량비에 따른 영향을 PES/NMP/Salt 계의 coagulation value, light transmittance, 점도 등의 열역학 및 속도론적 특성으로서 설명하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.58-59
• /
• 2002

고밀도 자기기록 매체의 재생 헤드로 응용되기 위해서는 높은 자기 저항비와 소자 제조 및 작동시 발생되어지는 열에 대해서 안정해야한다. 일반적으로 스핀밸브에서 나타나는 열화현상 중 가장 주된 원인은 반강자성체에 사용된 Mn이 고정층 및 비자성층으로의 확산으로 인해 반강자성체/강자성체 산이의 교환결합력의 감소와 스핀의존산란이 감소되어 자기적 특성이 열화 되는 것이다[1]. 이러한 상호확산은 거칠기, 결정성, 결정립 크기와 같은 미세구조에 크게 의존한다[2]. (중략)

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.80-87
• /
• 2002

A comparative study using electron-beam(EB) and thermal curing techniques was carried out to determine the effect of cure behavior and thermal stability of epoxy resins. In this work, benzylquinoxalinium hexafluoroantimonate(BQH) was used as a latent cationic catalyst for an epoxy resin. According to the thermogravimetric analysis(TGA), the decomposed activation energy based on Coats-Redfern method was higher in the case of thermal curing technique. This could be interpreted in terms of slow thermal diffusion rate resulted from high crosslink density of the thermally cured epoxy resin. However, the increase of hydroxyl group in the epoxy resin cured by EB technique was observed in near-infrared spectroscopy(NIRS) measurements, resulting in improving the stable short aromatic chain structure, integral procedural decomposition temperature, and finally ductile properties for high impact strengths.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.43-51
• /
• 2013

The changes in business structure of domestic construction companies suggest that there is a close relationship between the volume of overseas project and a company's financial condition. Based on this assumption, this study conducts an empirical analysis on a relationship between overseas project and financial stability of a construction company. The ratio of liquidity and liability was used as liquidity index and stability index respectively. The analysis was based on quarterly time-series data between 2000 and 2010. Two models were constructed for the analysis: Model 1 was based on the liquidity ratio and the amount of domestic and overseas construction project; Model 2 was based on the debt ratio and the amount of domestic and overseas construction project. The analysis results showed that the increasing amount of overseas project facilitated short-term financing with greater liquidity, and yet it was not very effective in lowering the debt ratio. This suggests that the dramatic increase in overseas construction project, which is observed recently, is not entirely an optimistic sign.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.328-333
• /
• 2020

In this study, blended feedstock derived pyrolyzed fuel oil (PFO) and coal-tar was prepared to produce a pitch by thermal polymerization reaction for manufacturing artificial graphite materials. The aromaticity value of 0.355 and 0.818 was obtained for PFO and coal-tar, respectively. In addition, PFO and coal-tar exhibited the difference tendency of weight loss curve for thermogravimetric analysis, which is related to the structural stability depending on the aromaticity and functional groups. The production characteristics confirmed that the pitch derived PFO showed lower production yield and higher softening point than that using blended feedstock. In particular, when comparing P360 (138.5 ℃) and B420 (141.4 ℃) having similar softening points, the production yields of both pitches exhibited 29.89 and 49.03 wt%, respectively. This is mainly due to the blending of PFO and coal-tar having high pitch polymerization reactivity including a large amount of alkyl groups and coal-tar having high thermal stability. This phenomenon indicated that the increased production yield is because of a synergic effect of both the high reactivity of PFO and thermal stability of coal-tar.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.135-144
• /
• 2016

It is essential to lighten the weight of switch girders in order to reduce their costs of manufacturing and make it easier to use them in construction. Lightening the weight of switch is also important to the Maglev 3-way switches system, however, the design variables should be considered very carefully if lightening is to be applied to the system, because these variables are vitally related to the levitation stability. Because Urban Maglev trains have a structure in which train bogie wraps around the guiderail, the adjustment of a girder's height is a possible way to reduce the weight. The safety of the application of this concept is ensured by repeated experiments in a test bed, however, due to a lack of space and budget limits, the design parametric study for the system model can substitute for actual application. The purpose of this paper is to study the design parameters that are concerned with levitation stability while a Maglev train is running on the Maglev 3-way system depending on the weight of the switch girders. In this study, switch girder weight is reduced by adjustment of girder height and girders are and modeled as a flexible body. The effect of the adjustment of girder height on the levitation stability can be analyzed by comparing the velocity of the train when it passes the switch girders, with the lateral gap, and the levitation gap which are obtained from the co-simulation of the Maglev train's dynamics model and flexible switching system. The results of this research will be used to design a Maglev switch.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.642-650
• /
• 2020

In general, the circulation path of the fluidized particles in a CFB (Circulating Fluidized Bed) boiler is such that the particles entrained from a combustor are collected by a cyclone and recirculated to the combustor via a sealpot which is one of non-mechanical valves. However, when a fluidized bed heat exchanger (FBHE) is installed to additionally absorb heat from the fluidized particles, some particles in the sealpot pass through the FBHE and then flow into the combustor. At this time, in the FBHE operated in the bubbling fluidization regime, if the heat flow is not evenly distributed by poor mixing of the hot particles (800~950 ℃) flowing in from the sealpot, the heat exchanger tubes would be locally heated and then damaged, and the agglomeration of particles could also occur by formation of hot spot. This may affect the stable operation of the circulating fluidized bed. In this study, the unevenness of heat flow arising from structural problems of the FBHE of the domestic D-CFB boiler was found through the operating data analysis and the CPFD (Computational Particle Fluid Dynamics) simulation using Barracuda VR. Actually, the temperature of the heat exchanger tubes in the FBHE showed the closest correlation with the change in particle temperature of the sealpot. It was also found that the non-uniformity of the heat flow was caused by channeling of hot particles flowing in from the sealpot. However, it was difficult to eliminate the non-uniformity even though the fluidizing velocity of the FBHE was increased enough to fluidize hot particles vigorously. When the premixing zone for hot particles flowing in from the sealpot is installed and when the structure is changed through the symmetrization of the FBHE discharge line for particles reflowing into the combustor, the particle mixing and the uniformity of heat flow were found to be increased considerably. Therefore, it could be suggested that the structural modification of the FBHE, related to premixing and symmetric flow of hot particles, is an alternative to reduce the non-uniformity of the heat flow and to minimize the poor particle mixing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.361-375
• /
• 2015

An energy pile is one of the novel ground heat exchangers (GHEX's) that is a economical alternative to the conventional closed-loop vertical GHEX. The combined system of both a structural foundation and a GHEX contains a heat exchange pipe inside the pile foundation and allows a working fluid circulating through the pipe, inducing heat exchange with the ground formation. In this paper, a group of energy piles equipped with parallel U-type (5, 8 and 10 pairs) heat exchange pipes was constructed in a test-bed by fabricating in large-diameter cast-in-place concrete piles. In addition, a closed-loop vertical GHEX with 30m depth was constructed nearby to conduct in-situ thermal response tests (TRTs) and to compare with the thermal performance of the cast-in-place energy piles. A series of thermal performance tests was carried out with application of an artificial cooling and heating load to evaluate the heat exchange rate of energy piles. The applicability of cast-in-place energy piles was evaluated by comparing the relative heat exchange efficiency and heat exchange rate with preceding studies. Finally, it is concluded that the cast-in-place energy piles constructed in the test-bed demonstrate effective and stable thermal performance compared with the other types of GHEX.