• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.482-488
• /
• 1997

Copper recovery from waste water of electronic industry has been conducted effectively in a fluidized bed reactor. Initial concentration of copper in the waste water, liquid flow rate in the reactor, reaction temperature and time and current density between the cathode and anode in the reactor have been selected as operating variables. The effects of operating variables on the recovery of copper have been studied. It has found that the copper resolved in the waste water can be recovered continuously by means of a fluidized bed reactor The recovery of copper decreased with an increase in the initial concentration of copper in the waste water, while it increased with increasing reaction time and current density, however, it exhibited its maximum value with the variations of liquid flow rate and reaction temperature. The optimum reaction condition to maintain the copper recovery around 85% is as follows ; $X_o=3wt%$, $U_L=0.5cm/s$, $T=25^{\circ}C$, $I=7A/dm^2$ and t=2hrs within this experimental condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.228-235
• /
• 2016

Nitrite accumulation is essential for constructing an anammox process. As the pH in the reactor exerts a complicated and strong influence on the reaction rate, we investigated its effects upon treatment of an ammonic wastewater (2,000 mgN/L) through modeling and experiment. The modeling results indicated that the reaction stability is strongly affected by pH, which results in a severe reduction of the 'stable region' of operation under alkaline environments. On a coordinate of the total ammonia nitrogen (TAN) concentration vs. pH, the maximal stable reaction rates and the maximal nitrite accumulation potentials could be found on the 'stability ridge' that separates the stable region from the unstable region. We achieved a stable and high ammonia oxidation rate (${\sim}6kgN/m^3-d$) with a nitrite accumulation ratio of ~99% when operated near the 'stability ridge'. The optimum pH that can be observed in experiments varies with the TAN concentrations utilized, although the intrinsic optimum pH is fixed. The direction of change is that the optimum operational pH falls as the TAN concentration increases, which is in excellent accordance with the observations in the literature. The optimum operational pH for 95% nitritation was predicted to be ~8.0, whereas it was ~7.2 for 55% partial nitritation to produce an anammox feed in our experimental conditions.

• Applied Biological Chemistry
• /
• v.41 no.6
• /
• pp.457-464
• /
• 1998

For investigating the effect of amount of applied fertilizer with pig and chicken manures in the field, the number of soil bacteria were counted on the full strength conventional nutrient broth (NB) medium and its 100-fold dilution (DNB) medium. From the control soil samples without organic amendments, the number of bacteria on DNB medium was 5 to 10 times higher than that on NB medium. However, population density on NB medium was higher than on DNB medium from the treated soil with 60 and 120 Mg/㏊ for 3 years. Most of isolates from DNB plates did not grow on the NB plates. There were only grown on the 100-fold dilution medium, so it was called as DNB organisms. The DNB organisms were occupied as dominant group over 60% fo isolates in control soil. However, their occupation rates were rapidly decreased in the treatment soil with pig and chicken manures above 60 and 120 Mg per ha. These DNB organisms (oligotrophs) were significantly low population desities in the treatment soil with organic materials.

• Applied Biological Chemistry
• /
• v.18 no.3
• /
• pp.167-176
• /
• 1975

As a study on the ATP-inhibited ribonuclease of Bacillus subtilis the screening work for obtaining the ATP-inhibited ribonuclease negative mutant were carried out. And mutant strain was selected by the treatment of N-methyl-N'-nitro-N-nitrosoguanidine (NTG). For the selected strain the enzyme purification and some physiological properties were examined and the results obtained were as follows. 1. Among tested 1817 strains with the treatment of NTG, 101 strain was selected as a mutant strain. 2. ATP-inhibited ribonuclease was tentatively purified by several independent column chromatography. The results with Sephadex G-75 column were 30 times purification, 99% recovery, and 20 times purification, 98% recovery, respectively. 3. ATP-inhibited ribonuclease was purified by 60 times through acid treatment, ammonium fractionation, and two successive chromatography. 4. The purified ribonuclease were shown to be effectively concentrated in robonnclease content and to have reduced numbers of protein band on Disc electrophoresis. 5. This enzyme degraded single-stranded RNA to 2',3'-cyclic AMP, 2',3'-cyclic CMP, 2',3,-cyclic GMP, 2',3'-cyclic UMP and some unknown intermediates. The enzyme could not split double-stranded RNA.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.723-732
• /
• 2020

The spent RHDS (Residue HydroDeSulfurization) catalyst is deactivated mainly by deposition of various contaminants such as coke, sulfur and vanadium on the surface of catalyst. To eliminate those contaminants, the following remanufacturing process was conducted. The first, heavy oil on the surface of the spent RHDS catalyst was removed by kerosene and dehydrated. The second, the high temperature incineration was carried out to eliminate coke and sulfur components deposited on the surface of spent RHDS catalyst. The third, the excessive quantity of Vanadium deposited on the surface of catalyst was removed by leaching process as follows: ultrasonic agitation was carried out at 50℃, for 10 seconds with 0.5% and 1% oxalic acid solution. The purpose of this process is to find out regenerated RHDS catalyst can be used as SCR catalyst for NOx reduction by controlling the vanadium residual content of the regenerated RHDS catalyst through leaching process. The composition of regenerated RHDS catalyst was analyzed by XRF and the NOx reduction efficiency was also measured by continuous catalytic fixed bed reactor. As the result, regenerated catalyst, with 0.5% oxalic acid, ultrasonic agitation in 10 seconds, showed the most stable NOx reduction efficiency. Also, in comparison with commercial SCR catalyst, the NOx reduction performance of regenerated catalyst was similar to that of commercial SCR catalyst at the temperature 375℃ and higher whereas was lower than commercial SCR catalyst at the temperature range between 200~250℃. Therefore, it was confirmed that the regenerated catalyst as powder form wash coated on the surface of metal corrugated substrate can be used for commercial SCR catalyst.

• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.518-528
• /
• 2014

The purpose of this study is to observe the effects of road facilities that have adopted digital media such as total road facility called L.E.D media pole installed on U-street, Gangnam-gu on the pedestrians' satisfaction. Through the study, we would like to improve the brand competitiveness, increase the revisiting decision factors and suggest the fundamental development direction for the digital media road facilities on the typical pedestrian road, Gangnam street. The three factors from the studies came out to be spatial component, design component, and functional component. In order to analyze the factors, the pedestrians' behaviors were observed through a direct survey which provided 35 reserved factors. Also, the preliminary factors derived through survey questionnaires were revised by experts which compressed the result into 20 factors. The result of the regression analisis states that the 'Factor of the spatial component' is the statistically significant factor among the five elicited factors of the effect of the media pole on the pedestrian satisfaction. U-street's media pole provides the comfortable and various contents and application methods and will provide the new perspective on the purpose of pedestrians by new experience that is based on digital technology.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.217-231
• /
• 2003

Coded excitation with complementary Golay sequences is an effective means to increase the SNR and penetration of ultrasound imaging. in which the two complementary binary codes are transmitted successively along each scan-line, reducing the imaging frame rate by half. This method suffers from low frame rate particularly when multiple transmit focusing is employed, since the frame rate will be further reduced in proportion to the number of focal zones. In this paper. a new ultrasound imaging technique based on simultaneous multiple transmit focusing using modified orthogonal Golay codes is proposed to improve lateral resolution with no accompanying decrease in the imaging frame rate, in which a pair of orthogonal Golay codes focused at two different focal depths are transmitted simultaneously. On receive, these modified orthogonal Golay codes are separately compressed into two short pulses and individually focused. These two focused beams are combined to form a frame of image with improved lateral resolution. The Golay codes were modified to improve the transmit power efficiency (TPE) for practical imaging. Computer simulations and experimental results show that the proposed method improves significantly the lateral resolution and penetration of ultrasound imaging compared with the conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.222-227
• /
• 2020

Pb(Zr,Ti)O₃(denoted as PZT) in the perovskite phase is used as a dielectric, piezoelectric, and super appetizer material owing to its ferroelectric properties. A PZT film was formed by an RF magnetron sputtering process by preparing a target composed of Pb_1.3(Zr_0.52Ti_0.48)O₃. The PZT film was formed by dividing the material into a mono-layer PZT produced continuously with the same sputtering power and a bi-layer PZT produced with two-stage sputtering power. The bi-layer PZT consisted of a lower layer produced under low-power sputtering conditions and an upper layer produced under the same conditions as the mono-layer PZT. XRD revealed small amounts of pyrochlore phase in the mono-layer PZT, but only the perovskite phase was detected in the bi-layer PZT. SEM and AFM revealed the upper part of the bi-layer PZT to be more compact and smooth. Moreover, the bi-layered PZT showed superior symmetry polarization and a significantly reduced leakage current of less than 1×10-5 A/cm². This phenomenon observed in bi-layer PZT was attributed to the induction of growth into a pure perovskite phase by suppressing the formation of a pyrochlore phase in the upper PZT layer where the densely formed lower PZT layer was produced sequentially.

• Journal of Distribution Research
• /
• v.12 no.2
• /
• pp.23-49
• /
• 2007

Recently, mobile marketing is becoming one of the major topics of interest to the marketing discipline. Emerging from rapid developments in mobile technology, it has created opportunities for new and innovative mobile services. Also, it is enabling to conduct always-on connections that consumers can interact anytime and anywhere. Especially, mobile devices place themselves to the core means of mobile-commerce which to execute a function as a distribution channel in mobile environments. Although the adoption researches about innovative services or technologies had executed in marketing areas over the past decades, most researches just expanded or modified existing theories and explanation models. There has been little study on the comprehensive and systematic review of adoption process. Therefore, it deserves to be considered prior usage experiences of the existing channels(CL) and attractiveness of the new channel(CLalt) based on social exchange theory. In order to address this void, this study unifies components of perceived attributes in the each dimensions (ie. benefit, cost, and risk dimensions) and explores prior usage experiences of the existing channels on adoption intention in electronic financial service channels through developing comprehensive model and employing empirical test for the hierarchy of effects model. Based on these empirical results, this study suggests managerial implications for new channel management in electronic financial service areas by focusing on the prior usage experiences of the existing objects on adoption intention and perceived attributes of ubiquitous-based mobile service channel.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.365-377
• /
• 2006

Proteins are known to perform a biological function by interacting with other proteins or compounds. Since protein interaction is intrinsic to most cellular processes, prediction of protein interaction is an important issue in post-genomic biology where abundant interaction data have been produced by many research groups. In this paper, we present an associative feature mining method to predict implicit protein-protein interactions of Saccharomyces cerevisiae from public protein interaction data. We discretized continuous-valued features by maximal interdependence-based discretization approach. We also employed feature dimension reduction filter (FDRF) method which is based on the information theory to select optimal informative features, to boost prediction accuracy and overall mining speed, and to overcome the dimensionality problem of conventional data mining approaches. We used association rule discovery algorithm for associative feature and rule mining to predict protein interaction. Using the discovered associative feature we predicted implicit protein interactions which have not been observed in training data. According to the experimental results, the proposed method accomplished about 96.5% prediction accuracy with reduced computation time which is about 29.4% faster than conventional method with no feature filter in association rule mining.