• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.95-101
• /
• 2006

A face detection plays an important role in face recognition, video surveillance, and human computer interaction. In this paper, we propose a progressive threshold method to detect human faces in real time. The consecutive face images are acquired from camera and transformed into YCbCr color space images. The skin color of the input images are separated using a skin color filter in the YCbCr color space and some candidated face areas are decided by connected component analysis. The intensity equalization is performed to avoid the effect of many circumstances and an arbitrary threshold value is applied to get binary images. The eye area can be detected because the area is clearly distinguished from others in the binary image progressive threshold method searches for an optimal eye area by progressively increasing threshold from low values. After progressive thresholding, the eye area is normalized and verified by back propagation algorithm to finalize the face detection.

• Korean journal of food and cookery science
• /
• v.11 no.5
• /
• pp.511-520
• /
• 1995

The growth extent of Leuconostoc mesenteroides and Lactobacillus plantarum in the medium which contain sterilized extract of each kimchi minor ingredient (green onion, garlic, ginger, raw red pepper, and red pepper powder) was examined. All minor ingredients decreased the growth of Lac. plantarum, and this effect of garlic is the most distinctive, ginger had the positive effect on the growth of Leu. mesenteroides, and garlic had the negative effect on the growth of Leu. mesenteroides. When the growth extent of two bacteria in the medium which contain sterilized successive extracts of each of garlic, ginger and red pepper powder was examined, the butanol fraction of garlic was reprsented the negative effect on the growth of Leu mesenteroides and Lac. plantarum, and the water fraction of ginger and red pepper powder were represented the positive effect on the growth of Leu. mesenteroides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2170-2178
• /
• 2014

In this paper, electroencephalographic (EEG) signal of one among subjects measured biosignal with visual evoked stimuli inducing the concentration was analyzed to detect the changes in the attention status during attention task fulfillment from January to February, 2011. The independent component analysis (ICA) was applied to EEG signals to isolate the attention related innate source signal within the brain and Electroculogram (EOG) artifact from measured EEG signals at the scalp. The consecutive accumulation of short time Fourier transformed (STFT) attention source signal with excluded EOG artifact can enhance the regular depiction of EPOCH graph and spectral color map representing time-varying pattern. The extracted attention indices associated with somatosensory rhythm (SMR: 12-15 Hz), and theta wave (4-7 Hz) increase marginally over time. Throughout experimental observation, the ICA with STFT can be used for the assessment of participants' status of attention.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.49-56
• /
• 2005

In this paper, we describe a solution to improve the effects of the transmitter leakage signals on the frequency modulated continuous wave (FMCW) radar with a single antenna configuration. We analyze characteristics of the IF noise caused by insufficient isolation between transmitter and receiver. The magnitude of the intermediate frequency (IF) noise from a front-end can be reduced by matching the LO signal delay time with that of the largest leakage source. Because the IF noise has periodic singularities at nT$_{m}$/2, t=0,1,2$\cdots$, we find that spectrum of the IF noise due to the leakage signals is very similar to that of the VCO moduation signal except low frequency elements in the vicinity of DC. Based on the studies, we fabricated a W-band homodyne FMCW radar sensor and verified the proposed solution. The results are applicable to design of the homodyne FMCW radar with a single antenna configuration.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.23-28
• /
• 2007

There are many modern's overwork. excessive drinking, carriage that give stress in muscle by smoking. Because time that sit long by carriage is much. if myalgia beats widower on muscle rheumatism or union formation inflammation, core ache, there is congealment and is painful. Muscle itself is no military register change and rheumatism change shows in areolation of muscle film or muscle nerve sheath etc. that union tissue's inflammation case is around the muscle. It is typical rain joint sex rheumatism. Can assume in case of made work that do not get used to extreme exercise or body perforce. Special quality of do waveform and supersonic waves stimulation processing plant which frequency that is established in research that do Iroin is continued without change is available embodiment according to patient's state variously by series mode through mode frequency waveform, 10 modes, 25 modes, 50 modes etc. Sample that can decide basis standard for supersonic waves through an experiment, low frequency treatment equipment standard for low frequency equipment. supersonic waves treatment equipment that float in city adjusting establishment naturally establish.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.67-68
• /
• 2001

제지공장은 에너지 다소비 업종이며 고도의 장치산업이기 때문에 초지 설비의 효과적 운영을 통한 생산성 극대화가 경제성과 직결되어 었다. 또한 24시간 연속생산을 하는 초지 설비로 소비자가 선호하는 품질의 종이를 생산하기 위해서는 공정의 안정성 이 매우 중요하다. 이는 공정의 불안정화는 생산제품의 품질 변화를 유발함으로써 균일 성을 저하시키는 악영향을 미치기 때문이다. 제지 공정의 안정화를 저해하는 인자에는 지절, 지종 변화, 조업중단, 조업재개 둥과 공정의 특성상 수반되는 돌발사태 등이 있을 수 있다. 이들 인자 가운데 가장 심각하게 공정의 안정성을 악화시키는 것은 지절의 발 생이라 할 수 있다. 지절이 발생되면 생산성 저하 등의 여러 문제점이 발생하기도 하지 만 다량의 파지가 발생되기 때문에 공정 안정성 면에서 볼 때에도 부득이하게 생성된 다량의 파지를 공정에 재투입하기 위해 재해리해야하므로 많은 양의 백수가 소모되며 이에 따라 예기치 않은 공정 백수의 사용으로 전체 백수계에 갑작스런 변동이 생기게 된다. 백수가 파지의 해리에 사용됨에 따라 공정 내에는 추가적인 청수가 공급되어야 하므로 전체적으로는 청수의 사용량도 늘어난다. 또한 증가된 파지의 재사용도 대부분 의 공장에서 broke chest의 용량이 한정되어 있으므로 이의 적절한 컨트롤은 중요하다. 더욱이 점차 공정이 고폐쇄화됨에 따라 공정 컨트롤에 대한 여유가 적으므로 백수와 공정의 관리는 점차 어려워지고 있다. 공정 시율레이션은 현존하는 공정을 수학적으로 모델화하여 이를 컴퓨터 하드 왜어를 이용해 실제 공장에서 일어나는 상황을 모사하는 것이다. 이러한 공정 모사는 새로운 공장을 설계하기 전에 타당성 조사와 여러 가지 사례조사를 실시할 때, 기존 공 장의 개조나 증설 또는 기존 공장의 운전조건을 실제로 변경하기 전에도 미리 모사를 함으로써 실제 시험 운전을 하는 경우 보다 많은 비용과 시간을 절약할 수 있다. 본 연 구는 백상지 생산 공정 설계도면을 참고하여 상용 시율레이터로 시율레이션 모델을 구 축하고 이를 기반으로 지절 상황을 모사하였으며, 지절 후의 공정 불안정화 상황을 파 악하였다. 또한 이러한 상황의 대책을 강구하기 위해 다양한 공정 조절 방안을 시율레이션 모댈에 적용하여 그 결과를 해석하였다.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.49-49
• /
• 2003

목적 : 심초음파는 비침습적이므로 반복적으로 정확히 심질환의 경과를 관찰하여 치료효과 및 수술시기를 정할 수 있는 검사로서 임상적으로 매우 유용하다. 실시간 심근조영심초음파에 의한 time intensity 평가는 부위별로 수행됨으로 연속적으로 위치하는 관심영역이 intensity에 있어 심장의 움직임 변화에 영향을 받는다. Time intensity 곡선의 최적의 곡선맞춤을 위해 주기적인 심장 운동 매개변수를 조합해 기존의 모델을 보정한 안정적인 측정방법을 제시한다. 방법 : 심장의 운동에 의한 특징적인 정보를 설명하기 위해 기존의 문헌에 제시된 지수 함수에 주어진 심박수로 만들어진 시간에 관한 일반적인 정형파 함수를 추가한다. C(t) = A[1 - exp($\beta$t)] + Dsine(2$\pi$ft + $\theta$) C(t): videointensity A: plateau videointensity (blood volume) $\beta$: capillary blood velocity (rate constant of rise in videointensity) t: pulsing interval (ms) D: displacement from the periodic variance of the curve (estimated motion field from the ejection point for the ratio between systole and diastole) f: heart rate $\theta$: transit time issue A $\times$ $\beta$ : myocardial blood flow 관상동맥의 관류 데이터에 대한 실험이 펄스간격에 대한 비디오 세기로 수행되었다. 그리고 이러한 결과들이 the sum of squares due to error, R square, root mean squared error로 평가되었다. 결과 : 실험결과, 주기적인 심장의 움직임과 심박출 시점으로부터의 변위를 잘 기술하고 곡선에서의 측정 점들이 예측된 심장 움직임에 따라 성공적으로 표시되었다. 뿐만 아니라 보정된 모델이 현저한 적합도의 향상을 보여주었다. 결론 : 제시된 접근방법은 각각의 측정에서 심장 운동 영역의 변화에 독립적이며 측정 시점에 의해 영향받지 않고 심근 관류의 안정적인 측정이 가능하다. 심장의 움직임에 관한 매개변수를 조합한 모델로 곡선접합을 수행함으로써 관류의 정량적 정보를 좀더 정확하게 얻을 수 있으며 임상적 이용을 가능하게 할 것으로 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.263-272
• /
• 2001

For a high resolution real-time kinematic GPS surveying using carrier phase, positioning accuracy according to the OTF initialization was better than 1 cm with more than 5-minute initialization within 20 km baseline. Also, it is recommended that measurements be carried out when PDOP and RDOP can be kept less than 4.0 since the geometrical layout of satellites has a great influence on the positioning accuracy. After considering the initial conditions and measuring time zone for real-time kinematic GPS. post-processed continuous kinematic GPS and real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller at the time of measurement. As a result, it has been revealed that possible noise in surveying could be corrected and the accuracy could be improved.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.23-31
• /
• 1994

Sound scattering by cylindrical tubes submerged in water is numerically analyzed with material attenuation considered. Complex wave numbers is introduced to see the effects of material attenuation on resonance scattering Backscattering pressures from the shells immersed in water are calculated for air-filled aluminium and acryl tubes. In order to investigate the resonance characteristics in detail, numerical analysis program has been completed which enables us to evaluate the effects of material attenuation. The testing of the program by comparison with previous results is reported and calculation results are compared and discussed for both aluminium and acryl tubes with material attenuation considered. The resonance peak and width is strongly affected by attenuation and this becomes severe as the peak is sharp and narrow and $k_{1{\alpha}}$ is high.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.297-307
• /
• 2009

For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.